AR Thread / AR General / tripfag containment thread

>>27801003
in

File: 1446480141781.jpg (1MB, 2100x1015px) Image search: [Google]

1MB, 2100x1015px

>>27801003
Until they come out with a ris lll

File: DSC_6206.jpg (2MB, 2400x1600px) Image search: [Google]

2MB, 2400x1600px

>>27801019
not if it looks fucking gay

like the Lite III

Are there any good quad rails that won't rape my wallet?

File: 1446479539592.jpg (2MB, 2100x1181px) Image search: [Google]

2MB, 2100x1181px

>>27801027
You look fuckin' gay

>>27801056
no.

File: reccenfx24.jpg (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

>>27801027
Wasn't the Lite III just the narrower version of the II that they had been putting on their pre-built rifles for a while?

File: WP_20151018_013[1].jpg (2MB, 2705x1728px) Image search: [Google]

2MB, 2705x1728px

>>27801056
MI has both FF and non-FF quadrails for around $150.

>>27801003
Copying from last thread

>>27800826
>>27800828
>>27800831
Last Round Bolt Hold Open

I know sometimes there are issues on rifles where this does not occur. I'm guessing its a gas issue?

>>27801069
Depends on gas system, buffer and also ammo used. My AR wont hold open 50% of the time when I use Tulammo

>>27801064
I like that rifle less since you added rear BUIS

Having ultra-gucci front BUIS with no rear right was perfect

>>27801003
>>27801019
>>27801064
To the untrained pleb after a certain point in quality it seems like a quad rail is a quad rail.

Why do so many people suck off DD?

>>27801086
Features, mounting system, aesthetics

>>27801061
Well that's unfortunate.

By rape my wallet I meant over $300 by the way senpai.

How's the LaRue?

>>27801067
you like A1 forward assists, huh

>>27801067
But how are they?

>>27801086
>>27801092
indestructibility

>>27801097
>By rape my wallet I meant over $300
oh i assumed you were a poorfaggot fuck that would cry about anything over $50

larues are pretty great for how much they're on sale for right now

File: WP_20151020_003[1].jpg (2MB, 1728x3072px) Image search: [Google]

2MB, 1728x3072px

>>27801100
If I didn't have a teardrop FA on my A1 build it'd be retarded, and the one on the carbine adds snowflake factor and pisses off anon.
>>27801104
I like mine and the reviews are solid.

What are the downsides to going with just a thread protector at the end of my barrel? Seems like it would be more fun to shoot giant fireballs with no concussion

File: straightweirdyo.png (10KB, 500x500px) Image search: [Google]

10KB, 500x500px

>>27801133
Well, for starters, we'd make fun of you.

>>27801139
Man if I posted the janky ass muzzle device that's on there right now it would be way worse lol

>>27801064
Probably, the light lll is the slimmest and sexiest quadrail DD makes.
*keyword is "and"

>>27801144
Do it.

File: 114update.jpg (2MB, 2688x1520px) Image search: [Google]

2MB, 2688x1520px

hey senpai

my Seekins rail should be in today

>>27801145
*lite lll

>>27801154
*lite IV

File: image1.jpg (77KB, 640x480px) Image search: [Google]

77KB, 640x480px

>>27801148
In my defense, I got the rifle in a trade.

File: shedsarelikefences.jpg (2MB, 1080x1920px) Image search: [Google]

2MB, 1080x1920px

>>27801085
>I like that rifle less since you added rear BUIS
I always found it amusing the vein popping that only having the 99051 out front caused.

>>27801086
It is certainly a case of diminishing returns after a certain point. The high dollar rails usually have some design feature or usage history that sets them apart, but that feature or heritage may not be worth the extra cost to everyone.

I like the KAC FF RAS honestly because of their use in service rifles. My interest in the DD RIS stems from the same aesthetic appreciation.

There are cheaper rails than the KAC that are lighter, have better mounting systems, and offer more integrated features (like QD sockets), but they don't have the pedigree I enjoy.

>>27801003
Given how retarded the BAFTE is and the sig brace and shockwave situation.

Does it almost seem like someone just design a full blown stock and say to the ATF it is designed to be used a certain way? I wonder if they could get by with adjustable stocks and just claim that it because people have varying lengths/sizes of forearms?

>>27801079
That is what I'm trying to avoid.

Is anyone aware of any good literature that goes into this?

>>27801113
>indestructibility

So is a DD superior to others in the same price range? I would imagine after a certain dollar amount they are basically the same as far as their strength.

>>27801201
What I've seen online is basically just use trial and error. As long as your barrel/gas port/gas system aren't hilariously shit, you can usually just replace your buffer with a lighter one if you have problems with BHO.

>like the KAC URX
>want a KAC URX
>too basic for the gucci price tag and expensive wrench I need for it

Is there another rail out there that looks similar?

>>27801003
Why did you not paint the upper? Why will you not answer this question?

>>27801196
With the cost of a shockwave (~$50) or a sig brace (~$80), the cost of an adjustable unit would drive you ever closer to the price of just getting your stamp.

I have a sig brace that my friends and I share while waiting on F1s. Outside of non-SBR states this seems like the best usage to me. For just a single rifle, skip the brace and just file for a stamp.

>>27801196
Im still waiting for someone to design a longer buffer tube (between carbine and rifle) with a slightly wider end with a dumb explanation.

No way they'll consider said buffer tube as a stock right?

>>27801242
I'll take a VLTOR A5 for $50, Alex.

>>27801238
Don't stamps mean you have to notify the ATF anytime you move across state lines? I'd imagine a lot of people don't wan't to deal with all the bs/paperwork associated with SBRs.

>>27801242
https://www.vltor.com/shop/a5-system/pistol-a5-the-vltor-a5-pistol-kit/
one of these with a cane foot on the end

>>27801251
Interstate permission slips are good for up to a year.

I'm buying parts for my upper and I'm wanting a 7075 handguard. The only names I've seen so far is either Mega Arms or Hodge Defense. Does anyone know of others?

>>27801251
you have to notify any time you want to take it across state lines and not just with moving. It is relatively simple with just a 5320.20.

http://www.migunowners.org/forum/showthread.php?302233-ATF-5320-20-Form-Transport-NFA-items-Interstate-Tips-to-complete-Form

>>27801251
In a hurry, just slap a 16" upper on it and you can move across state lines with it in Title 1 configuration without any hassle. If it is a permanent move on short notice, just do that and file your 5320.20 and slap your short upper back on once you get it back.

Another option is perm attaching a sealed suppressor to a short barrel to meet 1" OAL. You don't need permission to transport a suppressor, and your rifle that is effectively a suppressed SBR is just a Title 1 firearm.

>>27801133
Depends on the kind of shooting you want to do.
There's nothing objectively wrong with a thread protector.

>>27801279
Can't you technically transport the lower and upper in separate cases then?

>>27801279
I didn't know you don't need permission for suppressor transport. Maybe I'll look into getting a can once that Hearing Safety bill gets rejected.

>>27801292
SBR lower + SBR upper = SBR
SBR lower + Rifle upper = not SBR
SBR lower + no upper = SBR

>>27801292
It's still an SBR as long as the upper is under your control.

>>27801310
>>27801314
Gay
>not like I cross state lines to shoot often
>or ever really

>>27801218
SLR Rifleworks Solo
Troy SDMR

>>27801218
Geissele Mk4

>>27801133
Alternatively, how can I enhance the fireball coming out of my muzzle without significantly increasing noise? I've seen the Degroat flash enhancer vids but they aren't very impressive and the device itself is ugly as sin.

>>27801331
It's not like it matters unless you get pulled over by the ATF with the SBR in your back seat.

>>27801348
>how can I enhance the huge burning explosion without making it louder

>>27801355
By that logic, why even pay for the stamp? Unless you get pulled over nobody cares
>>27801362
Enhancing flash doesn't necessarily mean bigger explosion right? If I take off an A2 birdcage my rifle isnt louder but it is brighter.

>>27801165

a crush washer tho?

>>27801348
Bare muzzle is pretty flashy, but if you want a muzzle device, the Carson Flash Enhancer is the other option with a more standard look to it. $64.99 on Brownells.

File: image.png (448KB, 529x647px) Image search: [Google]

448KB, 529x647px

So goys.

What's the cheapest totally not a stock option that isn't shit if I'm looking to SBR eventually?

>>27801376
Whats weird about that? Legit question on my part, I'm somewhat ignorant when it comes to muzzle devices if that wasn't obvious already

File: FH-DoubleStar-Dragon.jpg (152KB, 1500x1000px) Image search: [Google]

152KB, 1500x1000px

>>27801348
The Doublestar Dragon "flash hider" is brighter than a bare muzzle.

>>27801380
Sorry, Carlson is the brand, marketed through Doublestar.

>>27801375
>By that logic, why even pay for the stamp?
Why even indeed.

>>27801208

I don't know how often you work on your gas tube or gas block, but the main advantage dd has over other quad rails is that you can remove the rail relatively painlessly, without having to fuck around with the barrel nut.

That, or you really are ocd and like to oil the outside of your barrel.

File: 4000BLACKGRAYTAN.jpg (21KB, 666x500px) Image search: [Google]

21KB, 666x500px

>>27801383
They come in SOCOM Black, Sniper Gray, and FDE.

>>27801380
Awesome. Big ass fireball and it doesn't look retarded, thanks man

>>27801406
>That, or you really are ocd and like to oil the outside of your barrel.

This is a major reason I've been switching over to Melonited barrels from parked exterior chrome lined barrels. That little bit of extra pain in the ass after shooting in the rain solved by technology.

>could probably get this for sub $800
>hnnnnnnnnnnng
>add $100 BCG
>add $25 milspec charging handle
>add a free A2 birdcage
>toss on my $60 lower with my $65 LPK
>find a pistol buffer and a not a stock

I want a mod 0 but this seems like a steal.

Talk me out of it.

>>27801530
http://www.brownells.com/rifle-parts/receiver-parts/receivers/upper-receivers/mk18-stripped-socom-upper-receiver-w-handguard-only-prod81194.aspx?avs%7cCartridge_1=AKK_5xzzx56+mm+NATO&avs%7cLength_1=10xzzx3
Forgot link.

KAC micro BUIS would be correct for this, right? Or should I skip right to a PA micro dot until I can afford a proper optic for it?

File: MK18CRANE.jpg (61KB, 791x527px) Image search: [Google]

61KB, 791x527px

>>27801530
Remember to add the cost of engraving!

File: sunsetar.jpg (65KB, 960x960px) Image search: [Google]

65KB, 960x960px

more lite rail master race coming through

File: image.png (1MB, 640x1136px) Image search: [Google]

1MB, 640x1136px

In

File: m4rifle3.jpg (31KB, 545x409px) Image search: [Google]

31KB, 545x409px

>>27801563
This really needs a DD M4 Quad 12.0 and A2 stock.

File: pileofass.jpg (849KB, 1400x1045px) Image search: [Google]

849KB, 1400x1045px

>year 7 of good lord ogobonga's rise to power
>still using quad rails

File: DSC01806.jpg (625KB, 1781x996px) Image search: [Google]

625KB, 1781x996px

Lite Rail is best rail

>>27801622
Heavy is love.
Heavy is life.

Are there any other quality holographic/red dot sights that offer the great FOV of an EOTech sight without the $500+ pricetag?

File: WP_20150909_004[1].jpg (2MB, 2945x1621px) Image search: [Google]

2MB, 2945x1621px

>>27801622
Fite me nig.

>>27801799
Mepro M5/Tru-Dot is the only other one that comes to mind.

Thinking of getting a warden for my rifle. 15 inch dd slim on a 16 inch barrel. I think it will look good. Black or dark earth??

File: 0504141744a.jpg (2MB, 2560x1920px) Image search: [Google]

2MB, 2560x1920px

>>27801622
Man if people with free float quads are dinosaurs then my rifle with it's ban-era muzzle, M5 RAS and C79 Elcan is a true antique.
Luckily the ban era muzzle is going away soon, machinist friend has it set up to be threaded soon. The rest is staying because I've grown fond of it over the years.

File: lightest.jpg (1018KB, 2592x1139px) Image search: [Google]

1018KB, 2592x1139px

>>27801809
if you can lug that heavy mother fucker over here
>>27801894
how is that c79 for being old as fuck. I got a lead on one for 400$

>>27801812
>Mepro M5/Tru-Dot is the only other one that comes to mind.

Thanks! That was actually exactly what I was looking for, as it's both cheaper and solves the retarded auto-off feature on EOTechs.

File: mfw_ban_state.jpg (1MB, 2183x1223px) Image search: [Google]

1MB, 2183x1223px

>>27801894
>Ban era muzzle

And I thought I was the only one. At least I actually live in a ban state.

File: sanscarl.png (243KB, 1130x900px) Image search: [Google]

243KB, 1130x900px

>>27801938
I'll somehow manage the 9.5 lb. loaded weight. Your fukkin dead kiddo.

>>27801551
>nobody responded
Just from looking though

>$445 rail
>$289 barrel
>$70 pinned gas block
>$16 gas tube
>$200 upper (only stripped DD upper I could find so I could be completely wrong)

But from the looks of it I may be able to get that upper for a little more than just the barrel and rail would cost me.

File: WP_20151104_003[1].jpg (2MB, 3072x1728px) Image search: [Google]

2MB, 3072x1728px

>>27801953
Shameful.

File: IMAG0235.jpg (3MB, 2688x1520px) Image search: [Google]

3MB, 2688x1520px

>>27801894
Even worse would be the collection of cast off parts that coalesced into a rifle, currently minus a barrel as that's the flattops barrel and it's waiting for a threaded H-Bar barrel to show up.
I will be the first to admit this thing is ungainly as hell and an absolute antique compared to any modern rifle but the little kid me that fell in love with the Delta Elite H-Bar in the early 90's had to have something like it.

Pictured next to the Vomit Stick, the result of buying a damaged and incomplete Bushmaster Bushmaster Assault Rifle and raiding the parts bin.

File: what did you say blk out.jpg (593KB, 1463x723px) Image search: [Google]

593KB, 1463x723px

>>27801956
>>27801956

>>27801972
i need that shit stick in my life

>>27801972
Part of me still wants to pick up a Bushmaster Arm Pistol just since it is so quirky.

>>27801938
The C79 feels like a box full of lead but the bastard is durable, mine has been knocked around and doesn't show any evidence of it. Mine even came from a batch slated for disposal in the mid 90's that the buyer resold instead so mine was abused long before I got it.

They have pretty piss poor eye relief but damn good glass, if it's the true C79 with the T-reticle I'd jump all over it. Just remember if the tritium is dead Elcan will keep them if you send it up to Syrupland.

File: 20151105_132351-01.jpg (1MB, 2448x3264px) Image search: [Google]

1MB, 2448x3264px

Why the hell does everyone hate the magpul light mount so bad? Keeps the light bezel forward of the muzzle to reduce barrel shadow, ergonomic as tits, securely hold the light. What's the issue?

>>27802070

That looks autistic and needlessly heavy.

File: IMG_20151104_161346463.jpg (4MB, 4160x2340px) Image search: [Google]

4MB, 4160x2340px

>>27801003
Can confirm

>>27801003
OP, is that a Diemaco rifle you go there?

File: DSC_6440.jpg (1MB, 2400x1600px) Image search: [Google]

1MB, 2400x1600px

>>27802187
no, it's a spooky ghost gun

>>27802075

What mount is suggested with the same qualities?

File: G018.jpg (3MB, 2843x2132px) Image search: [Google]

3MB, 2843x2132px

>>27801622
Agreed. These troglodytes with their obsolete cheese grater rails never learn.

File: c5b257990d50fb571ef704a922073ce7__56754.1409579621.1280.1280_1024x1024.jpg (40KB, 578x418px) Image search: [Google]

40KB, 578x418px

>>27801003
What's the overall opinion on Ferfrans CRD Modular Muzzle Brake? It's a regular muzzle brake with a QD shroud that directs most of the blast forward when attached. I kinda want it for my SBR.

>inb4 get a suppressor
Live in Canada, can't get suppressors

I know it's heavy but it's a range toy anyways so it doesn't matter too much.

>>27802268
>I know it's heavy but it's a range toy anyways so it doesn't matter too much.
Plus I can always take the shroud off to save weight if I just want the brake.

>>27802268
So youre gonna buy a brake, then buy a cover for the brake that completely negates the brake? Whatever u feel my man

>>27802296
Shrouds don't completely negate the effects of a brake.

>>27802306
but they really do.

>>27802296
Well it makes it so that you don't have to use the brake when you don't feel like it without taking the whole thing off.

>>27801003
Anyone have a spikes bar2? It's got the weight and I.D. requirements I need.

>>27802409
Also, does DD only make a 7" lite rail? It's the only one I see on their site.

File: IMG_20151105_132406.jpg (3MB, 3669x2340px) Image search: [Google]

3MB, 3669x2340px

I promise I'm not copying your rifles, qb

>>27802416
http://www.midwayusa.com/product/2684241363/daniel-defense-lite-rail-free-float-tube-handguard-quad-rail-ar-15-aluminum-black

File: Seekinsrail.jpg (1MB, 2688x1520px) Image search: [Google]

1MB, 2688x1520px

We Seekins now

time to hop on another upper I guess

File: COZl3eyW8AApdra.jpg (19KB, 400x400px) Image search: [Google]

19KB, 400x400px

>>27802434

File: 20150530_210244_zpsof65e7sm.jpg (441KB, 800x1422px) Image search: [Google]

441KB, 800x1422px

>>27801263
>permission slips

kek

ill stick with my pistol and buy 200 bucks worth of ammo

>>27802439
They are all discontinued

>>27802416
I think they make 9, 12, and 15 also.

>>27802531
How is that shockwave? Trying to decide if the stamp is worth all the bullshit.

>>27802545
http://www.midwayusa.com/product/2684296421/daniel-defense-ddm4-free-float-handguard-quad-rail-ar-15-aluminum-black

File: s-l500.jpg (21KB, 500x500px) Image search: [Google]

21KB, 500x500px

Anyone here familiar with Surefire's more obscure stuff?

If I understand it correctly, I can take the KM1-A or B head off a V1 Vampire light and put it on a M300 to make an M300V out of it?
Also, what the fuck is the difference between KM1-A and KM1-B? The 100 mW vs. 110 mW IR output?

I'm asking because the V1 Vampire often ends up costing *less* than the spare KM1 head.

>>27802347
But the gas still hits the chambers so you still have some recoil reduction.

File: 21229942585_56486d82db_h.jpg (558KB, 1600x634px) Image search: [Google]

558KB, 1600x634px

>>27802566
if youre an ocd autist, it will bug you

if you dont give a shit and just want to go PEW PEW PEW its great

>>27801069
Perpare fo number one clear answer.

Firstly most often bho failure are due to bcg not cycling fully. That is often due to insufficient gassed or wrong bufferweight/buffer spring rate combo as in too heavy and strong for the rifle.

Second most common reason is debris build up in spring channel or bolt stop channel inside receiver or worn/faulty bho spring. The magazine spring can be worn to point it cannont over come bho spring tension to move it up to stop the bolt.

Third is aftermarket part add on such as BAD lever causing problems.

>>27802595
What about it would trigger autism?

>>27801238
Get kekstanp and waive your right to privacy. ATF can pop up and pay visit inside your house anytime they please without providing reason of suspicion or whenever.

No thank kek club.

Git your illegal nfa as protest!

File: DSC03486.jpg (818KB, 2212x1242px) Image search: [Google]

818KB, 2212x1242px

>>27802681
not being a real stock?

File: 1443299003732.jpg (698KB, 3840x2431px) Image search: [Google]

698KB, 3840x2431px

>>27802681
faggots will tell you to pay 200 dollars to

>complete the look

>muh loophole

>poorfag

>asthetics

>bullets wont work as well

other dumb shit like that

File: 1444276651427.jpg (66KB, 640x640px) Image search: [Google]

66KB, 640x640px

>>27801406
>>27801484
> Not using some form of grease to coat your barrel under the handguard as in countermeasures action for preventing rust.

Preferably graphite grease.

> Being this OCD and dumb

pic related.

>tripfags: the thread

nothing is more boring than this shit on here

you're all such fags omfg how can you live with yourself

>>27802685
The NFA has been in place since 1934, that is 81 years. Could that change in our lifetime? That is certainly a possibility.

Until that happens though, I will enjoy actually owning rifles with proper stocks on them. The Government has less of a reason to come pay me a visit than they do you, Mr "I have to get stoned because school is too hard".

>>27802780
leave

>>27802736
hallelujah! hallelujah! Fucking gospel!

*arm and hand out and do church worshipping wobbling

*close eye and facial expressions as in I am receiving something holy

*mumbling hallelujah hallelujah

>>27802587
it doesn't work that way
there's no difference in recoil if i put the warden over a FH or a brake.

>>27802786
I am not a stoner tho m8

Being this delusional kek that willingly give up right for mere putting mere proper stock on without breaking the law.

Why dont you just go ahead remove your leg wear and bend over so i can call gay nigger to fuck ya you fucking faggot kekshit.

>>27802736
Ahhh, so something that won't bother me in the slightest.

The kak and sig seem like you can shoulder them fine given the size of the end.

File: grenade+shockwave.jpg (2MB, 2592x1936px) Image search: [Google]

2MB, 2592x1936px

>>27802786
>projecting this hard

kids piss you off?

What are the benefits of a 14.5" over a 16"? They worth the trouble of pinning?

Also is a 14.5 carbine gassed that bad? Because all I can find in non parkerized barrels in my price range ($200) is 14.5" carbine.

>>27802833
Is English your first language?

>>27802780
>whining about tripfag

Fucking anon whining about tripfag they are problems thread is going good questions are getting answered helpless was helped

Then here come you whining.

>>27802844
seriously, don't try to talk to him.

File: 1445810371734.png (1MB, 2148x1080px) Image search: [Google]

1MB, 2148x1080px

>>27802851
>pic related

File: chiaka shocked.gif (1022KB, 500x429px) Image search: [Google]

1022KB, 500x429px

>>27802837
wait... is that considered a handgun still?

>>27802844
how_new_r_u.tiff
CuriousGeorge is our resident... I don't even know what to call him. Cancer? Internet tough guy? Oh, I know.

He's our resident Super Weeb. Don't bring up weeb shit or else we won't be able to get him to stop posting weeb reaction images. He loves that shit for some reason.

>>27802869
should be
it's just a brace for your arm, senpai

>>27802869
Yes.

As long as you don't totally shoulder it. ;^)

>>27802844
Well well now i learn asl and English simultaneously.

So yea. I did have alot shitty english teachers growing up.

Do you sperg out every time you see sentence start with "and" or see sentence start and end without capitalizing or period or choice of sentence ending mark?

That was a honest question pls answer... you sperg.

Neither way if you do sperg out, kill yourself, if you do not but sperg out at me, kill yourself.

Pls answer anyway, im genuinely curious which sperging you do.

File: AR_9mm_03.png (359KB, 1098x725px) Image search: [Google]

359KB, 1098x725px

I like my shockwave. It does its job. I wish it had a more aesthetically pleasing and functional cheek weld, however.

>>27802865
> Like that picture is cross and garlic to vampire that is to me?

TOPPEST K E K

I aint going nowhere, I am here forever.

>>27802936
Maybe if you spent less time trying to learn Moonrunes and Japanese you'd have more time to brush up on your English.

You're a super weeb even by /jp/'s standards.

File: 1446479258946.jpg (2MB, 2100x1181px) Image search: [Google]

2MB, 2100x1181px

>>27802780
Benis

>>27802950
> Weebshitspeak
> me knowing it nor being worth my time to learn

Gr8 b8 m8

File: 1419545623201.jpg (539KB, 1536x2048px) Image search: [Google]

539KB, 1536x2048px

>>27802948
it puts a face to all this verbal diarrhea

>>27802811
Are you sure?
So if you have a brake with the warden on, it will have the same recoil as a bare muzzle?

>>27802972
Stop trying to hide your power level. You're in good company ;^)

>>27802736

this isnt yours, stop posting it

>>27802780
The worst are the tripfags who dont even post pics, geez, such tools

File: CuriousGeorge and Anons.png (91KB, 1075x1430px) Image search: [Google]

91KB, 1075x1430px

>>27802982
Not really m8.

Its more like pic related.

>>27802996
I am not weebshit full stop

When discovering 4chan /k/ was first board i visit.

File: laughing slut.jpg (688KB, 936x1312px) Image search: [Google]

688KB, 936x1312px

>>27803022
>he came to this thread for OC

>>27803053
what a qt newsfu

File: Nagato ar.jpg (322KB, 815x912px) Image search: [Google]

322KB, 815x912px

>>27803051
same here faggot. doesn't mean that weebshit isn't awesome.

File: rps20151103_231538.jpg (470KB, 2179x1062px) Image search: [Google]

470KB, 2179x1062px

>>27803041
Literally who.

File: nightfury.jpg (263KB, 858x1591px) Image search: [Google]

263KB, 858x1591px

>>27802960

Is that the last attempt? I think it's the best one so far - by a long shot.
Now they just need to start locking all paint away from you so that you don't fuck it up.

File: 1439048537021.jpg (3KB, 124x125px) Image search: [Google]

3KB, 124x125px

>>27803072
lmfao that scope mount

>>27802987
more or less
hanging a chunk of metal off the end is going to decrease recoil, obviously

>>27803078
What brand rail covers?

>>27803091
This is the rifle of an individual who would rather pay money for an inferior "stock" solution to just avoid paying slightly more for a stamp.

These are the v6 Camaro owners of the world. The people who buy Mickey's since "I get a lot, and it still has alcohol in it".

No amount of reasoning will convince them that there are better paths to take if only they could see past "but its cheaper and almost as good!"

>>27803118

Noveske NSR.

>>27803063
Occasional cool ridiculous silly fantasy shooting webm there and BUP BUP there! thats enough dosage of weebshit for me.

But constantly mentioning muh waifu or specific characters post lewd pictures of fucking cartoon.

*cringe

In high school i know a weebshit, well actually several of them and they was most cringy people i have ever met you sweat and cringe everytime they... It was a torture. I pity them but now i hate them.

There was one weebshit who's cool not a sperg he played sport and's actually my friend he wouldnt speak weebshit until other weebshit is encountered. Good guy but most weebshit arent like that.

Now let say i meet somebody new in uni and i get hint they are weebshit i already hate them until they are miraculous nonsperg retarded fedora tipping neckbeard.

>>27803121
> Making it about money. Despite obviously not about money its about ideology.

Look EVERYBODY a insecure kek that gave up right and now trying justify it.

File: 1422924227877.jpg (45KB, 376x417px) Image search: [Google]

45KB, 376x417px

>>27803121
>No amount of reasoning will convince them that there are better paths to take if only they could see past "but its cheaper and almost as good!"

famous last words

a bullet doesn't know how much you spent on a rifle

spend that $200 on gym membership

the only way money actually can increase your performance

File: rps20151103_022238.jpg (24KB, 540x422px) Image search: [Google]

24KB, 540x422px

>>27803091
I repeat thats just until the new mount arrive which should be today or within week.

Until then its in proper location for my convenient of using charging handle and being inside the eyebox. It held zero after receiving bump. If its going to be like that for forever i wouldnt sweat a drop.

New mount pic related.

>>27803149
>a insecure kek that gave up right and now trying justify it.

I think its quite clear that having paid my dues I have more rights with my weapons than you do. It is just about money. Are you doing anything to actually repeal the NFA other than whining on the internet?

Do you encourage brace owners to take the $100-$150 they saved on a stamp to donate those funds to the NFAFA or the Heller Foundation? Have you made any donations? I have. I spent the money, not only on myself for my stamps, but in the hope that you and everyone else will no longer have to in the future.

>>27803164
your muscles aren't going to stop my bullet roidman

File: Declaration_of_Independence_1776_hirez.jpg (4MB, 3923x4656px) Image search: [Google]

4MB, 3923x4656px

>>27803184
>I have more rights with my weapons than you do

you forgot to read this this

here is a high res pic for you

>We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain inalienable rights, that among these are life, liberty and the pursuit of happiness.

File: DSC_1101.jpg (4MB, 2848x4288px) Image search: [Google]

4MB, 2848x4288px

>>27801152
I've always like the top expert tnp patches. Pretty sure they stopped selling them. Wasn't actually planning on buying one anyway, but I think they're pretty funny.

File: rps20151103_022302.jpg (25KB, 533x432px) Image search: [Google]

25KB, 533x432px

>>27803177
Sexy like fuck eh?

ONLY $200 NO! *SLASH
ONLY $100 NO! *SLASH
ONLY $FORTY-TWOOOOO AND NINETY NINE!

>>27801104

I have an MI rail too

Sturdy as fuck, cheap, and the top rail flush fits perfectly with the M4 BCM upper I have

>>27803053

oh so now were allowed to post stuff that isnt ours??

hey queerbait king faggot you are needed

>>27801133
>>27801165

Just buy an A2 birdcage if you dont want to spend money. prob the same price as a thread protector anyway

File: ARHeli 1.jpg (2MB, 3261x2191px) Image search: [Google]

2MB, 3261x2191px

>>27802144
Is this new?

>>27803212
what mount is that senpai

>>27803112
Darn, i was hoping that since the gas is still hitting the baffles(brake) it would still feel like the bare brake.
I don't think i will buy one until i build an sbr.

>>27803186

being able to run 2 miles flat out will save your life in a shtf more than your 3000 rifle that your 450 lb lardass cant run 15 ft without popping an artery

>>27803201
Grandstanding is fine, but the law of the land still contains the NFA. Invest in your future, don't dream about what it could be if only someone else helped attain it for you.

>>27803212
Enjoy that wandering zero and inability to maintain when detaching the optic

File: sample_b95ce40dde1babe0289b34a44ea35feb.jpg (158KB, 850x927px) Image search: [Google]

158KB, 850x927px

>>27803228
what
he's not spamming shit he doesn't own

File: 1446479475722.jpg (2MB, 2100x1181px) Image search: [Google]

2MB, 2100x1181px

>>27803234
Has the paint started to chip off you can at all?
I noticed some flaking last week when i washed my ar.

>>27803253
kek i can run two miles. gymfags like you are the worst i swear, make sure you dont miss your next cycle

Doesn't look like a Ghost Gun General is up so I'll post this here;

I'm going to head to Harbor Freight in the next few days for the stuff I need to finish my 80%.
So far I have on my list:
Drill Press
Stop collar
XY Vice
Shop vac
Cutting fluid
Ear plugs (maybe)

I'm not sure if I'll need a router, I might grab one anyway. I've read you can also use a file to finish up the pocket.

Anything else I'm missing?

File: 15.jpg (186KB, 1150x1647px) Image search: [Google]

186KB, 1150x1647px

Best way of leveling a scope /arg/?

>>27803290
>Ear plugs (maybe)
you dont already own some?

>>27803302
No. I've learned to love the EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE.

(This will be my first gun.)

>>27803295
here ya goo now come on dun 2 texass yeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ha

https://www.youtube.com/watch?v=1ZybqTVNqOo

>>27803295
I level all of my scopes by eye on the bench and its worked fine for me out to 750.

If you want to use tools though, use a small bubble level on the receiver then on the elevation turret, have the rifle slightly canted so you can line up the edge of the bubble with the marks. This will make sure you are consistent on the measurements.

>>27803308
>(This will be my first gun.)
welcome to the world of guns m8

>>27803337
Well, not my literal first one, but the other one is an heirloom that I haven't shot since I got it (plan o it soon though).

>>27803308
>>27803290
spend a nickle and get yourself some earplugs

>>27803347
>heirloom
what is it

>>27803287
>gymfags like you are the worst i swear

people who are fit and dont accept my body image of lard whale are the wort.

kek

File: WP_20151104_006.jpg (2MB, 3072x1728px) Image search: [Google]

2MB, 3072x1728px

>>27802780
>how can you live with yourself
Quite easily, thanks.

File: 1889.jpg (587KB, 2048x1350px) Image search: [Google]

587KB, 2048x1350px

>>27803362
My great grandfather's H&R Auto-ejector in .32 S&W.
The last patent date on it is Aug. 1889, IIRC.

>>27803365
but im not fat so.. :^

File: Barn 5.jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

>There's another thread about ARs at this minute
>Side charging uppers
Anyone who likes those things is a moron.

>>27801218
>Accepting substitutes
Pleb

File: 1375381256720.gif (322KB, 500x200px) Image search: [Google]

322KB, 500x200px

>>27803335
That's what I've done in the past. Tested it by going 10 clicks high, 10 clicks low, been pretty good. Was checking for new hotness.

>>27802235
>>27801622
I'm going from a Keymod rail to a quad rail, fight me faggots

File: IMG_6517.jpg (445KB, 1353x613px) Image search: [Google]

445KB, 1353x613px

how should I paint my salt rifle?

>>27802936
I was genuinely curious. You've always been nice and helpful to me on here. I just figured everyone was being dicks to you because /arg/ is kind of retarded. Thanks for clearing that up for me.

>>27803295
http://arisakadefense.com/products/optic-leveler

it makes things easy but then isn't the best if you like to level your scope to your natural hold

>>27803453
With krylon to match your environment

File: IMG_6532.jpg (251KB, 700x701px) Image search: [Google]

251KB, 700x701px

>>27803453

>>27803271
Doesn't know about spraying plasticizer over the paint.

Shiggy diggy dooo CG knows and you dont.

S m b T b h F a m

(HEH however im glad to help)

>>27803240
Link in a min i advise you wait for me to receive it and do a review which will be after mounting and zeroing. Then bump it around a little then check zero. Then QD remove and remount check zero QD remove and remount check zero. I will even bote whenever it leave mark on scope body which tell tale of misaligned rings.

>>27803256
Wandering zero is far fetched it as it has to to be steaming shit teir far worse than ncstar teir. My dad had utg one piece qd mount which he dremel to accept his big $200 dollar something tactical Bushnell scope he remove it twice and remount it held zero. He no longer use that scope and ring set up for he have burris eliminator laser scope now.

Shocker?

I only care about it holding zero while mounted and have QD ability for removing it ASAP if it get damaged. Not return to zero after remounting.

> implying you shouldnt always confirm zero after remounting any mount even if you have bobro or gdi mount.

Eat it.

File: IMG_0510.jpg (540KB, 1280x960px) Image search: [Google]

540KB, 1280x960px

>>27803453
just fuck its shit up

>>27803290
If someone could comment on the router/file thing, that'd be great.

>>27803488
you dropped out in like 4th grade, right?

File: C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_1445664248962.gif (25KB, 210x240px) Image search: [Google]

25KB, 210x240px

>>27803468
>I just figured everyone was being dicks to you because /arg/ is kind of retarded.
Oh wow, in a scenario that involved other parties and CG, you thought it wasn't CG who was the retard?

>>27803453

whats that optic? and how do you like the blackhawk stock, i got one for 7 from PSA and it stuck pretty hard on a milspec tube, maybe they were just unloading blems or somthing touugh

>>27803538
lucid hd7. I like it so far.
I don't really like the blackhawk stock at all though. I'm waiting until black friday in hopes a good one will go on sale. Even if one doesn't, it's getting replaced either way. It wobbled like a motherfucker, so I put some tape on the buffer tube, and it doesn't really move around at all anymore.

>>27803565

yeah psa was selling them for like 6.99 or something and i was wary

>>27803233
But I don't want to hide flash. Just the opposite actually

>>27803488
Nig, the cans are cerakoted by surefire not by me.
The cerakote was chipping.

File: xbonemasterrace.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>27803271
Not really yet. I mean I've banged it against some stuff and lost some paint on one side, but I've gotten the thing really damn hot and haven't had much issue yet.

>>27803468
CG is by far the most retarded aspect of /ARG/. Like, it's not even close. Hate all the tripfagging or attention whoring all you like, CG does all that while also being the single most retarded user I've ever interacted with on this godforsaken hole of a website, and I stuck exclusively to /b/ my first couple years.

>>27803633
>xbone

PLEB
L
E
B

>>27803595
I got one of the blackhawk build kits minus the fcg because it was $5 more than the psa, and I was in the mindset of
>hey, it's a little more expensive, maybe it will be a little better
I should have just gotten the parts myself outside of a kit.

>>27803634
pretty much this, yeah. he's one dumb motherfucker.

File: 1444328486350.jpg (94KB, 601x665px) Image search: [Google]

94KB, 601x665px

Forward Assists: are they necessary for a civilian HD/range toy build? All's I know is they help push the bcg back into battery

>>27803488
>Utg
>Bushnell

Yeah, just stop posting

>>27803666
why not get it

>>27803666
No satan, they aren't necessary.

File: CG.png (478KB, 1791x1052px) Image search: [Google]

478KB, 1791x1052px

>>27803468
>>27803523
>>27803634
>>27803665
If anon was still confused why we know CG has immeasurable autism

>>27803633
why is your sight behind your laser?

>>27803666
They aren't necessary, but uppers with FAs tend to be less expensive than uppers without, so there's no reason not to have one uless you're doing a lightweight/retro build.

>>27803683
1) That particular laser device looks like it would be blocked by having the sight in front, unlike a PEQ or something that's designed to work around a FSB
2) The irons are a backup, therefor they're a lower priority and having the absolute longest sight radius possible isn't as critical, especially since they're third in line when the laser's in use with NODs (Laser > Optic > Irons)

>>27803683
FOV of the optic is over the top of the CQBL, the laser being forward on the handguard means it will not be occluded by his hand/fingers when grasping the handguard, and the controls are easily reached.

>>27803707
...Or if I'm a poorfag (the original reason I asked)

>>27803719
The M&P15 Sport doesn't have a FA, but you can build a full-featured PSA build for around the same price or a little less nowadays, so there's no real reason to go with the Sport. Especially since they stopped putting the nice melonited barrels in them.

>>27803488
here's link. you are welcomed.

http://m.ebay.com/itm/Hunting-Tactical-Scope-Weaver-Picatinny-Rings-QR-Extended-Cantilever-QD-Mounts-/141818622334?_trkparms=aid%253D222007%2526algo%253DSIC.MBE%2526ao%253D1%2526asc%253D20150519202348%2526meid%253D38018a71111f4e748e399416e768af11%2526pid%253D100408%2526rk%253D2%2526rkt%253D16%2526sd%253D141810036523&_trksid=p2056116.c100408.m2460

>>27803468
Thats sweet! Thanks.

Take a look, look like you strike somebody's nerve

His nerve -> >>27803523


>>27803520
Gr8 b8 m8 I actually graduated my HS with honor.

(Just now realized how none of my uni friends knows well thats better im generally humble type of guy)

>>27803670
> Implying Bushnell doesnt make good scopes.

Look at elite line.

> Implying utg isnt actually good in some part and is improving.

Look at utg pro stuff.

>>27803735
Yeah I'm starting a poorfag state armory build so that makes sense, I was just trying to see how jewish I could get with the penny-pinching

>>27803761
>here's link. you are welcomed.

Noname Chinese QD SPR mount?
That's pretty retarded even for you.

File: 1417850295007.jpg (104KB, 640x960px) Image search: [Google]

104KB, 640x960px

>>27803841
You expected more from him? He unironically thinks CAI makes good stuff.

If he says something is good, avoid it.

File: 20151031_164653 (2250x1135).jpg (976KB, 2250x1135px) Image search: [Google]

976KB, 2250x1135px

t-12hrs until i can assemble my ar.

CAN YOU FEEL IT!

File: Turtlin.jpg (2MB, 2446x3226px) Image search: [Google]

2MB, 2446x3226px

>>27803683
Laser doesn't clear the iron when it's in front.

File: dirtypair.jpg (2MB, 1920x3413px) Image search: [Google]

2MB, 1920x3413px

>>27803943
Your patience is astounding.

>>27803943
I'm feeling that you should move your front sight a few notches back so your light mount isn't hanging off the end of your rail.

File: WP_20151104_001.jpg (1MB, 1364x2872px) Image search: [Google]

1MB, 1364x2872px

>>27803841
>implying there's a limit to CG tardation

>>27803978
What butt stock on the right rifle?

When you guys rattle can a gun, do you disassemble, or just mask off some shit and paint?

>>27803992

he doesnt shoot his gun, it doesnt matter

File: 20150917_153222.jpg (3MB, 2988x3054px) Image search: [Google]

3MB, 2988x3054px

>>27803943
Oops, t-24hrs not 12hrs. mailman usually comes around 5-6pm.

>>27803978
thanks, i feel as though i've improved a lot.

>>27803992
i pushed it back one notch after my rifle fell and hit light first. it's all good now

File: uciwcollapsed.jpg (1MB, 1920x1080px) Image search: [Google]

1MB, 1920x1080px

>>27804036
LWRC UCIW stock, receiver extension, spring, and buffer.

>>27804040
Inquiring minds also want to know

>t. poorfag too poor to buy FDE upper + furniture for first rifle build

File: 20151031_180155 (2250x1266).jpg (2MB, 2250x1266px) Image search: [Google]

2MB, 2250x1266px

>>27804040
mask off things i don't want painted and then go to town on it.

File: 4IrE0Ls.jpg (2MB, 5312x2988px) Image search: [Google]

2MB, 5312x2988px

>>27803063
Which Figma is that? Max Faggotry?

Trying to decided if I want to spend all my cash on a TA11 or a great upper (or both)

>>27804040
i took the furniture off and then painted it

>>27804059
I mask optic lenses, sight posts/apetures, and any exposed turret markings. The rest I just spray assembled so I don't run into tolerance stacking with the paint between mated parts.

File: isitadmryet.jpg (1MB, 1632x1224px) Image search: [Google]

1MB, 1632x1224px

>>27804077
On something as light as an AR I'd recommend going TA33 instead of the TA11 as it is very bulky/heavy in comparison.

How hard is it to drill and pin an A2 FSB? Are set screw ones shit?

>>27804114
Just get a barrel with the fsb already on using taper pins.

>>27804151
This, they're easy enough to find.

>>27804077
>which figma is that? Mag Faggotry?
do you think figma means figure?

It's figma Nagato.

>>27804065
>rattle can a $2000 scope

>>27801003
WHat no love for the DD lite rail?

>>27804174
At this point, it is a proprietary eponym for an articulated figure, just like Kleenex or Band-aid.

File: 1446341854834.png (2MB, 2550x1426px) Image search: [Google]

2MB, 2550x1426px

>>27804174
I meant the manufacturer, and yeah, it's in the file name, or reverse image search

I kinda want some poorfag state armory
http://palmettostatearmory.com/psa-16-mid-length-5-56-nato-1-7-15-free-float-a2-premium-upper-no-bcg-or-ch.html

>>27804187
>being a pussy

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>27804055
That's what I thought. You like it pretty well? Thinking about one for a sbr build I'm gonna do on the pictured lower.

Do you happen to have a picture with it fully retracted compared to a non compact stock?

Got a little over excited while trimming down my hammer sear and now it will jump reset if you let off super slow... Anyone have experience with the generic nickel Teflon coated triggers from like PSA and the like? I think I may pick up a couple more hammers and try again though...

>>27804223
Never mind, I see it now. My phone wasn't loading pictures. >>27804055

File: 1437930040327.jpg (95KB, 1280x720px) Image search: [Google]

95KB, 1280x720px

>>27804208
This is entirely accurate, as Goodsmile has a "figma" line. (pose-able weebshit)

>>27804209
Oh okay, sorry m8
yeah, max faggotry made Nagato. articulation sucks because of the material they made the skirt out of.

>>27804187
I've rattlecanned S&B
It's not hard to remove if you change your mind.
Tape up the sensitive points and don't hold the can right on top of the scope. It's not hard.

File: choices.jpg (1MB, 1920x1080px) Image search: [Google]

1MB, 1920x1080px

>>27804233
For good measure here it is next to my least compact stock.

File: a_take_out.jpg (32KB, 400x360px) Image search: [Google]

32KB, 400x360px

>>27804229
>trimming down my hammer sear

File: 6584684361435135135.jpg (489KB, 1212x885px) Image search: [Google]

489KB, 1212x885px

>>27801003
>Can't argue against the OP edition
Maybe I'll source an overpriced FSP cut RIS II to put on that 14.5 socom to join the club and jock your style.

>>27804256
How else are you going to reduce engagement and eliminate creep?

>>27804260
i've got to get a socom barrel

then i'll use that govt barrel to make an m4gery

>>27804208
no it's not. You're retarded.
>>27804234
you're retarded too.
GSC distributes max factory shit. Figma is one of their lines. You're not going to see a kaiyodo or kotobukiya figma.

>>27804251
Great. Thank you. Looks like it cuts it approx in half from an a2

>>27804229
why are you doing stupid things? just buy a quality trigger.

File: 56584684651651654651.jpg (359KB, 1159x869px) Image search: [Google]

359KB, 1159x869px

>>27804274
How about you send me your upper with the rail on it. I'll send you the bravo socom 14.5 + moneys. You like building shit, I like spending money pointlessly and being lazy. Win/win dude.

>>27804272
Better trigger

File: 5.56 fmj jacketed 1000 times.jpg (1MB, 2561x1173px) Image search: [Google]

1MB, 2561x1173px

>>27804077
it's max faggotry... faggot
>>27804208
>>27804234
figma is in fact japanese for pose-able weeb shit

>>27804272
buy a Geissele SSA like a normal person

>>27804296
and have to track down another RIS FSP?
nah
and you don't want this upper
it has issues

>>27804284
Both Kaiyodo and Kotobukiya have articulated figures. Regardless of the fact that Max Factory articulated figures are their Figma line, the use of the term is universally understood to denote an articulated figure no matter the manufacturer.

File: M4_Barrels.jpg (33KB, 533x189px) Image search: [Google]

33KB, 533x189px

>>27804274
You don't want a socom profile unless your desire to clone is overwhelming, just stick with a standard M4 profile.

>>27804333
>Both Kaiyodo and Kotobukiya have articulated figures
yes. but they don't have figmas. that was kind of my point.
>the use of the term is universally understood to denote an articulated figure no matter the manufacturer.
no it's not. mcfucking kill yourself and go back to /v/.

File: 389f6fa134c6f242fcd31811db3acc4d.png (172KB, 544x765px) Image search: [Google]

172KB, 544x765px

>>27804339
>unless your desire to clone is overwhelming
you obviously don't understand

File: 46854651351351354.jpg (202KB, 637x849px) Image search: [Google]

202KB, 637x849px

>>27804305
What do you use as the filter/stencil to get that micro pattern? Almost has a carbon fiber texture look to it.

>>27804332
Yeah it would probably be a stupid trade on both ends, but always worth throwing it out there. How long did it take you to find one and what did it end up costing you? Really took a liking to the RIS II with that little mk18 upper I had for a few weeks.

>>27804151
>>27804165

Who makes good ones then? I was hoping to have a not shit barrel.

File: muh soy.jpg (2MB, 2592x1936px) Image search: [Google]

2MB, 2592x1936px

>>27804345
but... but.... you're wrong

>>27804359
ok, i wasn't actually looking for one at the time

i just randomly thought about searching for one on ebay and found one for a buy now price of 470

>>27804371
this is retarded as saying you should refer to any automobile as a toyota, or any gun as a glock.

>>27804367
Daniel Defense doesn't fully secure their taper pins if you order their FSP barrels so you lightly tap them out, install your barrel nut, then pound them in.

I would expect that to be a common practice, but I don't have experience with anyone else's offerings.

File: 1445302194488.png (480KB, 800x800px) Image search: [Google]

480KB, 800x800px

>>27804345
>no it's not. mcfucking kill yourself and go back to /v/.
>Being this fucking autistic

>>27804305
Yeah, I figure that out, I was looking at a different fig so I was dumb.
>>27804371
This

I kinda want a URX 3.1... Do I have the gay?

File: PSA enhanced fire control group.jpg (14KB, 370x370px) Image search: [Google]

14KB, 370x370px

>>27804229
http://palmettostatearmory.com/psa-ar15-pa10-enhanced-polished-trigger.html

I have this trigger group and it works great for me. I'm not in the market for a fancy two-stage yet, but this one just feels like a super crisp 6 lb milspec trigger. Add some different springs and you could bring the pull down to 4lbs probably. Pretty good for $35.

File: 6845651351651351.jpg (471KB, 1298x816px) Image search: [Google]

471KB, 1298x816px

>>27804376
http://www.brownells.com/rifle-parts/forend-amp-handguard-parts/handguards-amp-rails/ar-15-m16-ris-ii-m4a1-fsp-handguard-prod81785.aspx

So I have this sitting in my cart....

File: Cqm7ZmW[1].jpg (103KB, 1341x1252px) Image search: [Google]

103KB, 1341x1252px

>>27804401
this is literally you.

File: swapglass.jpg (1MB, 1920x1080px) Image search: [Google]

1MB, 1920x1080px

>>27804387
Do you own an ArmaLite brand ArmaLite Rifle 15 rollmarked and abbreviated as an AR-15?

I don't, but as far as everyone in this thread is concerned, its an AR-15.

File: image.jpg (205KB, 1024x768px) Image search: [Google]

205KB, 1024x768px

>>27804388
Only one of theirs I can find is a 16" mid.

I want a 14.5" carbine. Plan on putting the MI Extended Carbine rail on it until I'm not poor.

Should I just go with a BCM M4 upper?

File: Italian_mercenary_soldier_Ilio_Capozzi_with_his_feet_up_on_the_Kraut_space_magic.jpg (133KB, 1280x840px) Image search: [Google]

133KB, 1280x840px

>>27804401
>Being this fucking autistic
>he said, posting in /arg/

>>27804433
https://danieldefense.com/cold-hammer-forged-barrels/14-5-inch-chf-barrels.html?SID=dk7oik7787u3kcr4tq9ais9t66

Order through a dealer, much cheaper.

File: 1439087784438.gif (383KB, 257x266px) Image search: [Google]

383KB, 257x266px

>>27804443
>he said, posting in /arg/
Don't forget the tripcode

>>27804428
>>27804387

Reeeeeee

>>27804432
>The AR-15 was first built in 1959 by ArmaLite as a small arms rifle for the United States armed forces. Because of financial problems, ArmaLite sold the design to Colt. After some modifications, the redesigned rifle was adopted as the M16 rifle. In 1963, Colt started selling the semi-automatic version of the rifle for civilians as the Colt AR-15. Although the name "AR-15" remains a Colt registered trademark, variants of the firearm are made, modified, and sold under various names by multiple manufacturers.

File: sample-b2140e060f87cc83af46862b4fc9bc69.jpg (249KB, 850x850px) Image search: [Google]

249KB, 850x850px

>>27804417
but its black

and i'm going to make fun of you

>>27804449
Thanks senpai

>>27804504
you know it's okay to admit you're wrong.

File: aimpoint3000.jpg (172KB, 1370x952px) Image search: [Google]

172KB, 1370x952px

>>27804519
If I hose it down with greens and browns it won't much matter. I found the FDE for 445-450. I was thinking about trading/selling that m4gery so I'm not sure I'm going to pull the proverbial trigger anyway.

is 24 oz of battery acid enough to anodize a lower? I've heard you should use a 50/50 mix of water to battery acid to get a 1/5 ratio of sulfuric acid to water. I just don't know how much liquid you really need to anodize something.

>>27804582
Why not just buy a jug of sulfuric from a local Pool supply store?

>>27804599
>Pool supply store
kek

>>27804582
>>27804599
>tfw have a pool inna backyard so I always have access to acid

>>27802578

Anyone?

I just want to know whether I can take the head off the handheld Vampire and put it on a Mini Scout before I spend the $300.

>>27804634
i don't think so
it's likely that it's glued on like other surefires

>>27804599
I was wondering because I have 24 ounces of battery acid already.

File: 20151026_090340 (2250x1266).jpg (2MB, 2250x1266px) Image search: [Google]

2MB, 2250x1266px

new thread >>27804693

new thread >>27804693

>>27804634
BHP is listing the KM1-A specifically as an upgrade for M300/M300B

http://www.bhphotovideo.com/c/product/1029636-REG/surefire_km1_a_bk_led_module_120_lumens_ir.html