>HYBRID NYLON 6-6/BRASS STRIPPED RECEIVER http://www.tnar

Garbage.

Trash

Exceptional Quality.

Any other custom receivers you can get engraved?

engraving? never heard of it

Looks cool. Lighweight and cheap. Does anybody know why they're using brass?

>>21889510
shit they are gonna put the /k/ lowers i am gonna make out of business

File: youveneverseensuchtrolling.jpg (670KB, 2592x1944px)

670KB, 2592x1944px

>>21889510
a metric fuck ton better than the regular polymer 80 shit, more like a jmt with brass inserts and an ffl requirement.

I just want the clear one because it looks cool.

That being said, you could get an anderson or blem psa for $40 as well.

pic not related, lowers are cheap again, get them while you can.

File: DSC06040.jpg (3MB, 2592x1944px)

3MB, 2592x1944px

>>21889510
I got couple of them, they are light (1lb lighter), there are some fitting issues which with a little tweak it will work fine.

>buying a plastic lower ever

>>21889701
what part of them are brass?

File: Front Take Down.jpg (141KB, 648x972px) Image search: [Google]

141KB, 648x972px

>>21889701
The front take down pin area needed to be trimmed to fit.

>>21889585
i want to know the same thing, good quality custom engraved lowers

File: Brass.jpg (375KB, 1296x972px) Image search: [Google]

375KB, 1296x972px

>>21889742
The buffer tube nut and pistol grip nut are brass.

File: Bolt hold.jpg (378KB, 1296x972px) Image search: [Google]

378KB, 1296x972px

>>21889749
Another part needed to be tweaked was the bolt catch, I just polish the area where bolt catch rub against the receiver so it will tilt when the mag is empty.

Pic is before I polish the bolt catch, it does this to TangoDown, Troy, Magpul and metal USGI mags.

File: Too Spooky 4 me.jpg (52KB, 960x639px) Image search: [Google]

52KB, 960x639px

I am waiting for them to come out with the "Ghost gun" then I'll pick up a few.

>>21889742
Also this answer your question too

>>21889703
Glocks did this, shit worked out great and paved the way to polymer
Then again he said nylon and brass which have flex
Not something id precision build on

>>21889843
clear lowers when?

>>21889844
Glocks have metal reincforcement at all stress points.
This lower only has it for two threads. Not even bulked up at the buffer where the majority of breakages happen with polymer.

File: Free Rifle Eh.gif (11KB, 501x585px) Image search: [Google]

11KB, 501x585px

** ATTENTION POORFAGS **

Get 3 of this
http://www.aimsurplus.com/product.aspx?item=XATIRKT03&name=ATI+AR+M4+Profile+Rifle+Parts+Kit&groupid=714

+

One of this
http://www.tnarmsco.com/gen-iv-build-a-bundle-3-your-choice-of-3-receivers-free-shipping/

(if you have free FFL transfer)

= $1320 for 3 AR ($440 a rifle)

Sell the 2 extra for $660 each... now you have a free rifle

>>21889879
Clear plastic huh, i would hope you'd never shoot it.
Residue, scratches from brushing, staining from oil and copper solvent...

>>21889919
LGS formulas eh?

File: troll.jpg (401KB, 960x1278px) Image search: [Google]

401KB, 960x1278px

>>21889926
Why not?

>>21889994
Get back with me after 10k rounds and 10 cleanings

Also try suppressed full auto , i imagine that should be fun

>>21889994
all my wants

File: p22-quality.jpg (1MB, 2000x2000px) Image search: [Google]

1MB, 2000x2000px

I don't see how brass would be stronger than it would be if the same volume were made of one piece of plastic. In fact, I'd argue it's weaker, since the frame is thinner to accommodate the brass bit; the brass piece is just going to act the same way that a receiver extension would in a solid one-piece plastic lower. The weak point is where metal interfaces with plastic, whether that metal is the receiver extension or this brass ring doesn't matter.

Better materials and thicker plastic ought to make a difference. The brass seems gimmicky to me. Also that clear one is like putting a claymore in front of your face, clear plastic is far more brittle than tinted.

>>21890035
>>21890107
I'll wait for someone to make one out of glass.

>>21889919
>selling
>in a buyer's market

>>21889919
notbad.jpg
I work at a retail shop, might have to order 10 of these and sell them for $600

>>21889510
>http://www.tnarmsco.com/laser-engraved-lowers-as-low-as/
>Constructed of High-Strength Nylon 6-6 and Marine-Grade Brass inserts
>Marine-Grade Brass
what does that even mean

>>21890542
it means that they are approved for all fishguns.

>>21889510
PSA blemished lowers can be had for $10 more. Why would I waste money on this trash?

>>21890841
>no custom engraving

File: tpb.jpg (75KB, 960x539px) Image search: [Google]

75KB, 960x539px

>>21890841
>PSA quality
lol nope
dropped from 3 ft on the kitchen floor

>>21890921
The lower didn't break so what's seems to be the problem? I think only a very small percentage of LPK's front take down pin can take a fall like what happened to yours.

>>21889843
Oh, well that's explains "why brass" and "why so cheap". Brass because they can use cheap brass tubing, why cheap because there's barely any brass. I was hoping that the brass reinforced the area near the rear takedown pin too.

>>21890908
Great. I'm sure it will look pretty when it fails..

>>21890921
Saw your original post. You dropped a lower onto tile floor with pin sticking out causing the pin to shear.

>OMG!!! PSA SUX!!!

>>21891062
if it can't handle the force of it being dropped on the floor from 3 feet, i don't think i want to rely on it in the field.

>>21890542
Naval brass. It's used because it's resistant to corrosion. They're calling it that for marketing reasons. "Brass" is too common place of a word but "marine-grade" sounds special. Like "aircraft-grade aluminum".

File: tmp_sulawan_4726-tfb1310391554.jpg (24KB, 900x572px) Image search: [Google]

24KB, 900x572px

now do a cav arms style lower in clear and we will really be is GHOOOOOOOST GUN territory

File: 4690782068246.jpg (80KB, 703x527px) Image search: [Google]

80KB, 703x527px

>>21890921
>dropped from 3ft on kitchen floor
>lower still intact
Thanks for proving to me that PSA is acually good.

File: 3spooky5me.gif (84KB, 279x199px) Image search: [Google]

84KB, 279x199px

>>21891122
Make it out of clear plastic

>>21891122
hell yes, handguard too, and use a Lancer L5 translucent mag? I refuse to live in a world where this is not the future.

>>21890921
atleast it was a pin and not the reciever shitbag

>>21891135
>>21891227
the LPK was palmettos "enhanced" kit
made by PSA
shows their quality

>>21891256
Stop being so fucking mad and buy a new pin for $2.

Shit happens. You got a bad pin.

File: LZbZ6.gif (2MB, 425x352px)

2MB, 425x352px

>>21891325
It's not even a bad pin dude, that pin shouldn't be exposed to take that kind of abuse. That's like saying the door is faulty in the this gif

>>21891256
you can already tell that you had the pin out and dropped the entire thing on that spot causing it to snap. especially on a hard floor. Suck it the fuck up and always have extra parts, or be smart and buy shit thats steel that won't break.

>>21891084

>relying on it in the field

And when exactly will you be opr8ing?

File: 1396158735752.gif (1MB, 200x163px)

1MB, 200x163px

>>21890921
>>21891084
>>21891256
>drop lower with pin sticking out
>pivot pin broke, lower intact
>somehow this makes PSA bad

I seriously hope you sell all your firearms

>>21889677
Holy shit, was that stripped lower really $1000?? Even at the peak of the sandy vagina bullshit I could get stripped lowers for under $200 in fucking California of all places.

>>21891113
"Aircraft-grade aluminum" is not the same aluminum Dr. Pepper cans are made of you know. You can't build a certificated aircraft with whatever aluminum you happen to come accross.

>>21890908
>Not doing DIY engraving and anodizing on your 100% aluminum paperweight at home.

http://www.ar15.com/forums/t_3_4/484783_Vader_Spade_s_80__AR_15_build___Milling__Etching__and_Anodizing.html

>>21892735
I know. Everybody knows. Nobody cares because it's just the same 6061 or 7075 that every firearm mfg on earth uses. Same with naval brass. It's nothing out of the ordinary but people who don't know will see it as something special.

File: 20080130-6_d-0413-1-515h.jpg (78KB, 514x337px) Image search: [Google]

78KB, 514x337px

>>21892735
Have you ever seen the parts that go into a Robinson?

>>21889510
so it's like a Glock brand AR-15 ?

>>21894806
I've flown in an R22 but that's it.
Why? Are they shitty?

>>21894850
Eh, they're not shitty, but...how do I put this. If Bell is an H&K, the Robinson is a Romanian AK. It's not pretty, it's not high tech, and it's not made out of the finest materials, but she works and works well. My comment was more to address the whole "Dr Pepper alloy is not used in aircraft." That is not an accurate statement. Most soda can alloys are a 3XXX series aluminum. It's used for interior trims and some mounts and things. Nothing Primary or Flight Safety, but it's in there. But it is true you can't just use any aluminum, it has to be certified by the mill and designated by the B/P. Hell we do some parts that go in main rotors that are just pure lead.

>>21894884
Okay true, I didn't really have interior trim in mind.

Woah woah back it up...
Do you work at Robinson?! Are they hiring A&Ps?

>>21894955
That's a negatory there ghost rider. I work at a second tier contractor that manufactures parts for various aerospace manufacturers. Where are you located and what is an A&P? I'm not familiar with that acronym.

>>21894968
That's still pretty cool.

A&P = Airframe and Powerplant mechanic. I'm in Northern California workin' on Cessnas and whatnot.

>>21894994
I gotcha, let's see....well If you feel like moving to DFW you can probably get on with Bell or at DFW airport, or any of the others around here. Given the low cost of living you may earn less a year but pocket more than you do now. Also have Toyota moving here this year. Other than that, there's not a lot of aerospace news right now.

>>21895021
Thanks for the info anon.

File: Brace Installed.jpg (455KB, 1296x972px) Image search: [Google]

455KB, 1296x972px

Bracer came in today and got it installed - just need barrel, barrel nut, delta ring, A2 front sight, gas tube and muzzle device.

File: stein.jpg (61KB, 559x765px) Image search: [Google]

61KB, 559x765px

Hi, John Roberts here. One of the owners of Tennessee Arms. Just to answer a couple of questions i've seen. We used brass because of the ease of machining and also brass does not react to anodized aluminum. Also it will hold up to salt water. We have yet to have one fail in the field and our lower is used in some of Frank Proctors carbine classes. He used our lower on his personal lightweight build and he has close to 7000 rounds downrange, his build came in at 5.5 lbs. We haven't had any cracks in the buffer tube or any breaks at the beavertail. www.apexgunsmithing.com has been trying to break our lowers for 2 months without fail. We've mortared them, shot Beowulf with them, beat the hell out of them, and stand behind them 100%. That's why we offer a lifetime warranty on them which does transfer to different owners. If you have any other questions feel free to give me a shout at [email protected]

File: tmp_Sealion_032912-4411799.jpg (85KB, 800x567px) Image search: [Google]

85KB, 800x567px

>>21897897
> fafgots always complainin about shilling on /k/
> someone actually shilling
> no replies

ok

>>21898070
>A shill [...] is a person who publicly helps a person or organization without disclosing that they have a close relationship with the person or organization.

>>21897897 clearly discloses the fact he's an owner, so that's no shilling. However, it could be considered advertising, and that's against the rules.

>>21896187

$45 lower
$230 handguard

Your build makes no sense, and is ugly to boot.

File: event horizon.jpg (799KB, 1375x1375px)

799KB, 1375x1375px

>>21897897

Wow what a coincidence you found this thread, I bet you totally didn't even start it.

>>21898251
No actually i saw where i had 11 clicks from my Google Analytics traffic, so i thought I would stick my head in. I didn't start the thread. I post on reddit and that's about it.

>>21898332

Regardless, reported for advertising

File: 1371343755273.png (87KB, 703x337px) Image search: [Google]

87KB, 703x337px

>>21898332
I find it a little weird how you know how to post and reply already. Well whatever, welcome to /k/ now git

>>21898332
welcome to 4chan, you're here forever.
Anonymous will shit on everything so don't get upset at the bullshit spewed.

>>21898400
I make a lower that isn't metal. I'm used to bullshit getting spewed on me. No biggie. Sorry if it seemed like i was advertising, Im just trying to answer questions.

File: 1377224415233.png (1MB, 1482x925px)

1MB, 1482x925px

>>21897897
>dat lower
I don't care what /k/ says, you are alright

File: walken.jpg (332KB, 1364x908px) Image search: [Google]

332KB, 1364x908px

>>21898446
you might like this one too..I've been testing my laser out to see what i can and can't burn without the cheap mf locking up... did Walken in one swipe

>>21898478
Good jerb. He's a huge anti gun faggot

>>21898478
Can you make a Vining one instead, please?

File: 1403312570573.png (306KB, 3500x2520px) Image search: [Google]

306KB, 3500x2520px

>>21898478
You got anymore stress testing of your receivers? I want to buy but I want to be sure they are durable.

File: vining-2.jpg (122KB, 600x739px) Image search: [Google]

122KB, 600x739px

>>21898634
http://knowyourmeme.com/memes/people/sgm-mike-vining

YES do this on an AR lower

File: 1017279_10200960774364553_1040559448_n.jpg (43KB, 960x960px) Image search: [Google]

43KB, 960x960px

>>21898478
>>21898634
>>21898692

>>21889919
>Sell the 2 extra for $660 each...
wat? you think you're going to sell $400 parts kits for $660?

lol...

>>21898715
I need stickers of this for my gear case and gun safe. Where is the NE guy? Someone tell him to get off his ass.

>>21898725
You've never been to armslist I take it...

File: rick-harrison-pawn-stars-1.jpg (130KB, 760x1024px) Image search: [Google]

130KB, 760x1024px

>>21898744
you've never used armslist to buy or sell anything i take it..

>>21898715
On the laser now...black and white is sooo much easier to set up...give me bout 10 min , i haven't engraved anything today

>>21898731
I just ordered some from zazzle, Does anyone want pictures when i get them?

>>21898775
I'm a CNC machinist/laser operator.

What machinery do you run? Is it primarily CNC? If so, what manufacturer? Do you do any manual mill work?

I've dabbled in gunsmithing, milling out 80% lowers, making muzzle devices, drawing parts in GIBBS & CAD/CAM and cutting them on a CNC. Is there alot of money to be made in a small shop setup, or do you have to be hundreds of thousands into it before you turn any profit?

File: vining.jpg (290KB, 1364x908px) Image search: [Google]

290KB, 1364x908px

>>21898715
Here ya go.

>>21898897
fucking awesome, nice job

File: I NEEEEEEEDDDDD IT.jpg (81KB, 692x334px) Image search: [Google]

81KB, 692x334px

>>21898897

Must. Have. It.

>>21889919
>purchasing firearms with the intent to resell

We frown upon that.

>>21898891
We just now got into the laser game. We're trying to start out slow and save money for our hybrid AR10 mold. The injection machines and Epilog Mini flatbed laser are in the shop directly behind our building. We actually rent from the shop that does our molding. The laser I use is the absolute cheapest ($700) K40 chinese laser. Im using it with Corel Draw and the MoshiDraw software that came with the laser for engraving. It's good for stuff with good solid lines but the Epilog mini in the back is where it's at for detailed work. If you want to know about the injection machines i can find out, but i leave the presses to the press guy.

>>21898070
>guys comes right out and says he's a company co-owner
>has the name of the company and his fucking company emaail address right there

>shilling

These are dark times for /k/

>>21898897
Did the owner of TN Arms Co just jump into a 4chan thread about his lowers and then engrave Vining's face on one just because someone asked him to?

Fucking based.

>>21898919
Only way I would do this would be if someone submitted the art. I don't keep "likenesses" and trademark stuff on file, I consider that "one off" or "custom work"

>>21899002
Someone save this for future generations. /k/ really is a magincal place.

File: Liberty Bell.png (172KB, 2052x2637px) Image search: [Google]

172KB, 2052x2637px

>>21898897
Oh nice!
OP here, I'm looking ot get one of your lowers but I have a question, how well does the engraving look on a black receiver? how deep is the engraving?
i made this vector that I want engraved on a lower, but I want to be able to have the color of the engraving stand out to the black

File: image.jpg (29KB, 320x262px) Image search: [Google]

29KB, 320x262px

>>21899002
>mfw I was the man with the idea
>mfw my first screencap

>>21899028
I just want the color of the vector white though on the receiver

File: YES YES YES.gif (968KB, 380x262px)

968KB, 380x262px

>>21898897
E-mail this to Mike!

File: 1370553744811.png (29KB, 469x462px) Image search: [Google]

29KB, 469x462px

>>21898897

>>21898897
europe here, screw ITAR
i want one of those !

>>21899028
it wont work, the image is far to homosexual for the Chinese lazers

>>21898897
So uh what would be the best way to smuggle this to an Island nation?

Vining is love. Vining is life.

>>21899002
Yea I did,

File: 52a7671bc656f.gif (816KB, 500x500px)

816KB, 500x500px

Why do polymer lower makers always try and emulate the exact dimensions of a normal forged lower? Especially when the weaker material calls for some kind of change.

>>21899168
did you see my question? >>21899028

>>21899028
So you are going to color fill it later? If your just wanting the outline done pretty deep, I can do that, id probably makes two passes and make sure the lines weren't too thin. Make a good barrier for paint is what im sayin.

>>21899097
Yeaaaa ... about ITAR..... we kinda didn't forget to not pay them. :( Im not an international arms dealer yet.

>>21899226
yeah, I'm going to paint it in, I would just leave the instructions to engrave it deep right?

>>21899226
If we order one, can we specify that were going to color in? Bc I'm about to pull the trigger on this. Been wanting to do a lw pistol build for a while. What's the turn around on them?

>>21899249
just send me the Mike one you just did an put "plastic merchandise" on the box, customs won't care
pretty please

>>21899106
It didn't seize up when I did a DickButt . Just sayin

>>21899185
Our mold is actually over sized to take in account the 3% shrinkage rate of Nylon 6-6 . This isn't a carbon copy of a forging mold. We built it from a solid block .

File: 1402465481459.gif (2MB, 400x332px)

2MB, 400x332px

>>21899295
>It didn't seize up when I did a DickButt
You got a pic of that lower?

So you'll engrave just about anything then?

>>21899186
Soo you want it outlined... then the inside of the outline engraved? If that is wrong , be a little more specific. I'm sorry this would be my first pony job.

File: Liberty Bell2.png (103KB, 2877x2637px) Image search: [Google]

103KB, 2877x2637px

>>21899345
I just want the engraving deep enough that I can color it in, if that makes sense? like on a traditional AR-15 forged lower engraving. here's my completed vector

>>21898897
Fellow Tennessean here, I am definitely purchasing from you at some point in the future.

What other products do you make/want to make in the future?

>>21899257
Yes, if you leave it in the comments the engraving will be done to your specs

>>21899295
I NEED THE PICTURE!
NEED IT!

File: 1373169628916.jpg (37KB, 402x385px) Image search: [Google]

37KB, 402x385px

>>21899375
...just when this thread was going well, ponyfags come in and shit it up.

thanks, horsefuckers. you ruin everything.

File: 12 ga stencil.png (59KB, 537x600px) Image search: [Google]

59KB, 537x600px

>>21899345
Would be nice if you showed us

>>21899260
Depends on how complicated the engraving is and if we have that color receiver on hand. Pink, Rifle Green are out until Wednesday and FDE is almost gone until Thursday (we are waiting on brass) But if you want black the turn around would be less than 72 hours.. really depends more on how quick we can get a copy of your FFL's license

File: Liberty Bell2.png (108KB, 2877x2637px) Image search: [Google]

108KB, 2877x2637px

>>21899439
I am OP
you're welcome

>>21899450
nice, I have an FFL on hand, but yeah, I just need it cut deep enough to color it in. Here's version 3

File: dick.jpg (229KB, 1478x853px) Image search: [Google]

229KB, 1478x853px

>>21899334
that one was a hit on reddit.

>>21899490
how much would a custom engraved lower cost?

>>21899392
We are in the process of getting out NP3 BCG coated at Robar and we manufactur our own muzzle device. We're still small time. Nothing too big yet. Net big thing will be the AR10 lower

>>21899490
What won't you engrave?

>>21899490
I want it

>>21899446
An outline is going to look like an outline. It would actually take a while for a deep engraving for color fill.. I'm not going to run at full burn just to show you I can. That's just wasteful.

File: 1403534736717.jpg (130KB, 768x912px) Image search: [Google]

130KB, 768x912px

>>21899490
But will you do engravings of muh chinese cartoons?

>>21899503
One offs are 10 extra for one. If you get more than one they are 5 per.

>>21899520
I won't do anything French. And really detailed stuff would get sent back to the Epilog laser

>>21899569
Depends on how they turn out in black and white. Laser only reads black. So adjust your art accordingly

neat

>>21899516
If you guys could somehow get an AR-10 format rifle out the door for less than $1,000, you'll have broken into a very select market.

File: images.jpg (7KB, 200x200px) Image search: [Google]

7KB, 200x200px

tnarms confirmed based manufacturer. Suddenly I really, really need a zergface lower

>>21899550
Well you can now! I just placed an order for the Pony engraved lower.
The FFL also got sent to your email.

>>21899698
We plan on doing the DPMS style that is AR15 parts compatible for around 75 stripped. That should help some builds out.

>>21899610
So, you're saying you have no problem if I want a /k/ on one side and dick butt on the other?
Sweet

File: 1379441326539.gif (948KB, 360x200px)

948KB, 360x200px

>>21899727
Get hype

>>21899719
Damn that was quick. Thanks. Do you want the Liberty Belle engraved in there as well? and all of it is to be outlined .. but seperated for color..right?

>>21899745
The other side has my logo and ATF required stuff. the right side magwell is open for interpretation though.

File: 1397412311406.gif (677KB, 298x207px)

677KB, 298x207px

>>21899727
Aw shit yeah.

>>21899758
yeah, I do want the liberty belle to be engraved. but yeah I just want it all deeply engraved so i can put in color into the outline

>>21899758
>>21899789
wait do you want the pony outlined and solid in the middle or just the one you posted but deeper to allow paint? I get 2 different readings from you guys

File: Smile.webm (2MB, 1920x800px)

2MB, 1920x800px

>>21899727

File: tumblr_n5h4bgLpUT1s6bok4o4_250.gif (2MB, 245x200px)

2MB, 245x200px

>>21899727
My wallet is ready

>>21899758
>>21899821
Just the outline, I just want to color inside the outline, like if you were coloring in letterings

File: 1401489854321.jpg (1MB, 2048x1365px) Image search: [Google]

1MB, 2048x1365px

>>21899865
So the opposite of this?

>>21899892
Looks like she has a giant cock/tentacle in her beak

>>21899892
gah no like that, not the opposite lol.
The way I am phrasing it may be confusing.

no different than usual engraving is what i mean

>>21899892
How bout I just do the outline and you tell me what to do from there ////

>>21898478
You should make a Michael Bloomberg receiver.

File: engraving.jpg (219KB, 1024x768px) Image search: [Google]

219KB, 1024x768px

>>21899924
OP here, I just want the outlining like this.

>>21899924
I'll just use a trip so you will know who i am.

>>21899953
ok ..We're on the same page now. I thought you wanted to FILL it in. Laser activated!!!

File: 1357772629919.png (941KB, 995x1001px) Image search: [Google]

941KB, 995x1001px

Dear John
I've been supporting you since you first posted on leddit with your NP3 bolts. After the vining lower, I am now proud to have one of your products in my rifle.

Keep it up, and you'll always have a special spot in /k/'s heart.

NOw if only you could do one with the Great Remover on there...

>>21900031
Sweet! plz show some pics afterwords!

>>21900037
Im taking the Great remover is the artwork you're showing? Forgive me if Im not completely down with the lingo

File: 21656221.png (448KB, 4999x6240px) Image search: [Google]

448KB, 4999x6240px

>>21900037
>>21900077
Found a stencil for you

The Great Remover refers to the accordion-playing Yugoslavian in the Serbia Strong/Remove Kebab video
And if you haven't seen that...

https://www.youtube.com/watch?v=U-EQJA8Ahac

>>21900077
http://knowyourmeme.com/memes/serbia-strong-remove-kebab

File: 1342051589970.jpg (24KB, 619x413px) Image search: [Google]

24KB, 619x413px

>>21900109

SERBIA #1
SERBIA STRONK

File: Arkans Tiggers.jpg (29KB, 445x535px) Image search: [Google]

29KB, 445x535px

>>21900122
SERBIA STRONG WE KILL THE USTASE

File: liberty belle.jpg (430KB, 1364x908px) Image search: [Google]

430KB, 1364x908px

>>21899966
eckema improvement

On the top of the hat , i ran the tip of a punch along the lines that were lasered to see if it's deep...it's deep enough to hold color.

>>21900109
Oh I can laser the shit out of that.

>>21900192
how deep is the engraving on the lettering? it's kinda hard to tell

File: radovan karadzic.jpg (179KB, 640x814px) Image search: [Google]

179KB, 640x814px

>>21900122
>>21900217
That would be nice

>>21900229
Same as the rest of it. Just a bad angle i guess. You could just take a paperclip to it to dig the channels out. Or I can go over it again tomorrow( we're about to close)

>>21900309
ok, if you could go over it one more time it would be much appreciated, the deeper the better. Thanks!

File: 1386891897441.gif (492KB, 500x281px)

492KB, 500x281px

>>21900192
That was quick.

>>21900333
no problem at all.

>>21900347
sweet! can't wait to get it in

File: kojima kun pls.jpg (56KB, 531x653px) Image search: [Google]

56KB, 531x653px

KOJIMA custom engraving when

>>21900355
damn not i want a lower with diamond dogs

>>21898141
I mean to be fair that one post isn't necessarily advertising. unless he made the thread originally, which is likely

>>21900355
Do you have a better picture. I can convert pretty much anything , but that picture is kind of ... not great. But i can try to make it work if don't.

>>21900385
Im telling you man, I found this thread through Google Analitics. I saw a influx from a domain I've never been to and i just stuck my head in.

>>21898152
Could be he wanted to cut the over all weight down.

>>21900428
join us, learn the ways of /k/

File: diamond dogs.png (70KB, 375x360px) Image search: [Google]

70KB, 375x360px

>>21900428
is this a good enough image for the laser?

>>21898897
God damn, I might just have to pick one up when I build an AR.

>>21900470
I would have to do something with the lightning bolt behind the dog...out line maybe. But the overall look is good, all except for the grey. The laser only reads black not grey.

>>21900499
I almost want to take apart my Colt Match Target and put one of these on.

File: neat bender.jpg (28KB, 500x491px) Image search: [Google]

28KB, 500x491px

>>21897897

>>21900543
If you guys are reeeeallly going for lightweight. The clears only weigh like 4.3 oz . Those were the polycarbonate prototypes but i bet the new material we are going to be using for the clear will be an ounce lighter than our regular lowers.

>>21900603
CLEARS WHEN? i need one.. for sceince

>>21900647
Running the clear orange testers next week. If the material works out. Clears early week after next.

>>21900664
Im bout to cut out from work. Ill be back on here later if you guys have any more questions. Hell I might be on here all day tomorrow.

>>21900731
Did you end up doing this >>21900109?

File: Don't_forget_you're_here_forever.jpg (25KB, 500x375px) Image search: [Google]

25KB, 500x375px

>>21900731
>Hell I might be on here all day tomorrow.

>>21900740
I can do that one in the morning. The black and white faces seem to be coming out great. I know I can do that one .. no problem. Just put " The Great Remover" in the Engraving Code box on the engraved receivers page. I can knock those out all day long. DickButt is the same. Just put the words in the box.

>>21900753
I got a really bad feeling you're right about that

>>21900777
Welcome to the /k/ollective.

File: summer skool 2014.jpg (3MB, 1300x6500px)

3MB, 1300x6500px

>>21900731
fyi since you've never been here before, threads expire after a short time of inactivity and are deleted. Thanks for stopping by, in case you haven't figure it out yet this is a much different crowd than reddit

>>21900603
Have you tested your AR15 lowers with 6.5x39mm? I want a super light AR that packs a bit more punch for innawoods (cougers, bears and moose scare the shit out of me)

>>21900777
It's a really fun board if you can ignore the shit posting.

>>21900664
sweet can't wait

File: hommando_by_commissar_nyoron-d3gzn51.png (79KB, 466x449px) Image search: [Google]

79KB, 466x449px

pls mister

>>21900777
/k/ is full of nice people
We sometimes say weird things and some people try to troll with dumb post but just ignore them if you don't like it

I don't mind shit posting....I make lowers that aren't made of metal. I'm used to being shit on by the 101st Keyboard Brigade

>>21900886
I can do this. The reds would be black though.

File: 1326400854326.png (102KB, 248x247px) Image search: [Google]

102KB, 248x247px

>>21898897
Holy fuck

>>21901257
Ain't nothin a little tactically placed red paint can't fix.

>>21901257
that's fine, thank you :3

>>21897897
>>21898332
>>21898478
Would you mind linking to any stress/torture testing reviews & articles made about your lowers please, as well as any comments you have regarding the testing.

Why no additional brass reinforcing around the buffer tube and takedown pin areas which are known failure points?

Will be rebuilding my AR sometime soon and a polymer lower is in the running for weight considerations.

>>21898897
do want

File: tmp_1191624014997sb5-782755-155191649.jpg (29KB, 345x281px) Image search: [Google]

29KB, 345x281px

>>21900664
>clear orange

y, yu , you mean like pic related

also seriously, cav arms style stock+lower when?

File: diamond dog sharp.png (69KB, 375x360px) Image search: [Google]

69KB, 375x360px

take 2 of ?

might add lines to the diamond so the fill in can be done better

No.21901418
http://apexgunsmithing.com/poly-receivers-testing-part-2/

No additional reenforcement was needed around the takedown pins because all of our beating, dropping, mortaring, and extensive shooting with the Beowulf have not shown any damage to this area.

Weight on our standard lower is 5.6 oz , the clear prototype was around 4.3 if i remember correctly . The production clear hasnt been run yet but i will let all of the internets know how much it weighs

Our mold can do a Cav Arms style receiver+stock..sorry.

No.21901510?
I might be able to fill it with criss cross texture to make it work.

Do you guys do 80% lowers? I'm in jew york and need one of these for science

>>21901650
Our mold was designed for a 100% lower. The ATF would frown on us turning a mold that makes 100% lowers into paperweights . Bad juju..or wait..bad jew jew

>>21901688
Damn! I'll have to get one of those clear ones when I leave this miserable state then

Now I want to get the Tn Arms logo on our team's uniforms for the Summer Cup.

>>21901786
waitwaitwait
are you implying that we actually have a shot this year? Oh god I've been waiting forever, our team has been a disappointment for years after the first Cup win.

Bookmarked like the hand of an angry god. My NERV AR is this much closer to happening.

>>21901877
Oh fuck. I want to fucking see that when it's done. Somebody get the R3 logo on one of them and send it to those smalldick bastards so they'll hurry the fuck up with the RSS kits and 9x39.

File: 1352692836350.jpg (225KB, 849x1198px) Image search: [Google]

225KB, 849x1198px

>>21901925
I've been wanting to make pic related for fucking ever. I just hate the giant nasty rollmarks other companies have, and the staggering cost of a York engraved lower (something like $340 for an engraved lower). At this price, I would put up with the giant company logo.

Wait what...my logo on what? Im all about getting my name out there...what sport we talking bout?

>>21901942
My logo on the left side is made into the mold. Right side is wide open for artwork though

File: no-answer.gif (1MB, 328x217px) Image search: [Google]

1MB, 328x217px

>Customer submitted logos require a five receiver minimum.

>>21901993
That was made before we had our own laser. Damn I should change that huh..

>>21901969
I don't mind it at that price point. I mind the giant rollmark when it's a $100 receiver + whatever the cost of the engraving is, because at that point I could just buy a spikes receiver with a funny logo on it. But once I get this Ruger out of hoc, I'll be ordering one.

>>21902032
Yeah, that too.

File: 1403322043386.png (302KB, 5350x3189px) Image search: [Google]

302KB, 5350x3189px

>>21902032
I'd buy one right fucking now if I didn't have to apply for a permit to purchase

What level of detail are you able to get on the lower?
Would you be able to do this, in let's say, about the size of your company logo on the opposite side, and still preserve some of the smaller details?

no, i want one that is made entirely from a copper alloy. brass, bronze, red gold, don't really care which one.

>>21901954
Just the 4chan Summer Cup, part of 4chan's virtual soccer league.

I doubt you'd get much/any exposure from your logo on the /k/ kits, but 4chan banners are like $20 for a bunch of views on a single board.

>>21902106
Pretty Damn detailed...if your wanting that dirty vibe with specs on it. We can always send it to the Epilog laser in the back if the detail isn't good enough on mine.

>>21901954
it's a soccer video game tournament where computer teams play against each other.

>>21902157
Ahhh gotcha .

File: 1403319354626.png (79KB, 1000x379px) Image search: [Google]

79KB, 1000x379px

>>21902162
Alright, thanks for the response.
>pic just another design I was thinking of getting, other anons might want it too

this thread has been amazing.

>>21902237
What furniture would you throw on it?

>>21889919
Too bad ATI is absolute fucking shit.

>>21902266
I would go straight olive drab on the Imperium logo to really get that look of a laz rifle

>>21902294
No, I mean what pattern would you shoot for and how would you achieve this with furniture purchases

>>21890327
Brass is there because it threads well. It's really hard and or impossible to injection mold good threads, so instead they just use brass inserts and mold the receiver around them. This is really common for lots of high strength applications.

>>21890035
try 10 rounds; the thing frosts over on the inside almost immediately. As it sits, clear lowers are just fancy wallhangers

If I can find a cheap 20" upper I'm all over this thing.

File: 1175811127466sr4.jpg (33KB, 921x535px) Image search: [Google]

33KB, 921x535px

>>21902326
While I am very partial to the Kreig lasguns, a straight pistol grip doesn't really fit the theme of that. And I'm trying to keep this as light as possible, so a free-float rail is out of the question, which sucks, because with a little grey paint on the fcg to break up the profile of the big block-like upper+rail I could probably make it look like a m36.
So in short, I have no fucking clue what pattern I'd go for. I guess I'm just gonna throw on a mid-length 16" with OD magpul handguard and throw a purity seal on it

>>21898937
atf plz leave

>>21902351
We've shot about 180 through the prototype clear lower. No fading issues . The actual material we are going to use is made to be in the sun and resist fading. And that Shit is EXPENSIVE... it will probably be stronger than our regular lowers

>>21902465
neat

File: random rifle with some of teh furniture.jpg (251KB, 800x424px) Image search: [Google]

251KB, 800x424px

>>21902326
>>21902399
magpul MOE handguard and stock with flip up sights and a slanted muzzle brake. Duracoat it all imperial lasgun green and buy a bunch of 10 round straight magazines

>>21898388
It's not to hard anon-kun, any tumblr user could figure at least how to post for the most part. That said a MOD could verify if OP was the same person, which is unlikely since TnArms has been featured in some gun blogs for their clear lower.

Also Dickbutt lowers too.

>>21902847
It wasn't that hard to figure out how to post. I just didn't know if you needed to be a member or not. I have only read of 4Chan on other forums before, but never posted until I saw this thread on my analytics screen. That Shit tells you err thing about who's on your site and where they came from. Hell i can tell you how many IPhones were used on my site today. It's kind of scary actually

>>21902465
how much do you think a clear lower will cost?
>>21903048
fucking google man

reminder to black list all google assets per this post:
>>21903048

>>21903048
Google is building drones. I'm trying to find an SA-3 truck.

>>21903073
The clear is only going to be $60 and thats only because if material cost is outrageous. And yes Google knows a scary amount of info about everybody. Where you is. What OS you run, what phone you're on. How long you stay on a page, even how old you are, male and female .

File: Untitled.png (22KB, 362x423px) Image search: [Google]

22KB, 362x423px

>>21903096
>black list
Pleb. White list only.

But seriously, web statistics are completely normal. Information about your browser is sent with every request. It's how websites are improved and tuned for the user.

>>21903150
Copper wire mesh man Farrahaday cage that bitch( sp)

>>21903225
what is this?

>>21903278
noscript. something you should have installed years ago if you have a quarter of your brain left.

>>21903278
NoScript. Good script blocker. Once in a while I have a problem with the cross-site scripting protection. I can't get PBS videos to play because their player stops at "Error loading skin: crossdomain loading denied". I usually just open stuff in Chrome if it doesn't work.

>>21902183
I'd say shell out the shekels to spread the words of glory that are clear AR lowers, I'm sure a bunch of kommandos would buy one if they knew such a thing existed

>>21903842
We're sheckeling a ton of sheckeles on the material. We're gonna ride the word of mouth/ forum train for as long as possible

>>21903962
Please check your email friend, I had some questions about your lowers.

File: 1365873079967.jpg (470KB, 2592x1456px) Image search: [Google]

470KB, 2592x1456px

>>21899771
>>21903962
>The other side has my logo and ATF required stuff. the right side magwell is open for interpretation though.
So you wouldn't do pic related on the left side of the rifle?

>>21889994
You WILL snap the receiver extension off sooner rather than later.

File: diamond dog gold 01.png (32KB, 375x360px) Image search: [Google]

32KB, 375x360px

best i can do

trying to get a deep fill. anyone that actually has experience at making this shit look better plz help.

all the black is supposed to be the cut

File: diamond dog gold 01filled.png (35KB, 375x360px) Image search: [Google]

35KB, 375x360px

>>21907085
what it's planned for the colors

>>21889510
tbh I'm trying to figure out if they're better than my local fun store.

anyone ever done a comparison between the New Frontier Armory LW15 and the TNarmsco Hybrid?

you can get a built LW15 for $100 out here

>>21906471
I kind of don't have room to. The logo is made into the mold (this will be interchangable on the AR10 mold for contract jobs or blank receivers) . The Multi-Caliber and Name City and State are there per ATF requirements. The Fire/Safe are also made into the mold. These are either going to be pictograms or interchangeable mold inserts. But yes right side of the receiver is wide open, I usually only do the mag well, but I've been experimenting on going further out.

>>21906551
To be perfectly honest, I don't know the actual blend of that polycarbonate that was used, but where some PCs are brittle... this shit was flexible as hell. When I was tightening down the castle nut, the 12 oclock position on the receiver bent allll the way over to around 1:30 while i was torquing it down in the vise. I could also bend the magwell in with my hands and it would spring back. Now the actual material we will be using is on the same stuff that they use for high impact safety glasses. It's made to take a licking when it's thin. We're making it thick. Hopefully these will be stronger than our actual receivers , and they should just from the shear cost of the material itself

>>21907237
Tom at Apex Gunsmithing was going to do an apples to apples review between our lower and NFA. Problem is, he was going to run mine to death first and then follow with the NFA, both with the poly trigger groups, the problem was that my receiver never broke so he didn't have time to go over the NFA . He did do some first impression type stuff though. I've posted the second review but Ill find the first one. >>http://apexgunsmithing.com/poly-receivers-testing-part-one/

>>21907085
I'll push out a demo of the diamond dog and the great remover and post them when they are done.

See, now i'd officially call this advertising Anon i was talking to earlier

>>21900109
>>21906471
>>21908587
If you could do Ivan (Great Remover) on the magwell and "Remove" instead of "Fire", I'd buy the hell out of one.

File: diamonddog.jpg (277KB, 1364x908px) Image search: [Google]

277KB, 1364x908px

Here is the Diamond Dog- Great Remover coming up next...why do I feel like im chatting it up to an empty room...

>>21908750
Because it's early.....

>>21908750
shit nugga im still here

>>21908683
I call it answering questions. Even if i didn't own a firearms company ...but i still had a laser... I would still do shit like this. Hell this ain't advertising, Im wasting my money on engraving I want to do for funnzies.

File: remover.jpg (284KB, 1364x908px) Image search: [Google]

284KB, 1364x908px

I don't know why my camera changed over to the weird dark lighting mode...but it still turned out looking cool..

>>21908814
Not bad, but could it be moved over to the right? Sorry to be critical. It just has a lot of empty space on the left, and the part on the flair doesn't look that good.

>>21908750
Weekday mornings are pretty slow for the internet. Most people are at work.

>>21898897
You know, I wasn't interested in a polymer lower, and definitely wasn't interested when you mentioned reddit. But this alone now makes me want to buy one of your lowers.

I'll be picking some up in the near future.

>>21908814
Holy shit, you must be bored.
Can the fde receiver be dyed like magpul parts? I.e, boil it in dye to make it purple

>>21908683
who the fuck cares? he's making awesome shit

>>21899028
>user was banned for this post
what the fuck?

>>21908924
Warned.

Pony things belong in /mlp/.

>>21908823
Yeah i can put it wherever. I just have to redo my starting point, not a big deal

>>21908939
Question, how do you guys secure the brass fittings into your polymer lowers?

>>21908939
any chance you were able to get a second pass on my pony lower yet?
>>21908924
>>21908936
yeah I was just warned, bullshit though because all the other posts non-k related but still related to this thread like my original vector stayed up

>>21909046

Theres non /k/ related, and then there's pony shit. Go kill yourself faggot.

>>21909078
>implying i care
by posting that I was able to get a pony engraved lower.
get reked

>>21908865
Awesome..I look forward to it.

>>21889677
The plastic ju. Much cheaper than metal, mold a thousand a day for pennies. Advertise with operators in a photo. Stupid goys line up to buy them. Shekels.

>>21909112

Wow yeah you sure are good at being a massive faggot, that really le #rekt me.

>>21908983
Good question. We have both of our receiver inserts made in Utah at a Swiss Lathe company just for us since they are one offs and unique to the part world. The inside is just threading as you can tell. but the outside of the rings have what is called "knurling" and the hot material flows into these channels and solidifies . It's kind of the same principal that keeps teflon sticking to pans. We have found it impossible to remove the inserts once they are in their final position without damaging them beyond repair.

File: Glock 36 double stack mag.jpg (141KB, 650x650px) Image search: [Google]

141KB, 650x650px

>>21908865
Same here. Never wanted a polymer lower, but bro-tier co owner and the prospect of having the kebab-removing accordion player on my rifle is changing my mind.

>mfw where I live has a high concentration of Arabs
>mfw they're generally bros
>mfw I get the kebab-remover lower
>mfw one of the three Arab criminals in the city breaks into my house and I remove him with the rifle
>mfw I brought to court and destroyed

...I definitely want one as a plinker though

File: am I bad at match.jpg (62KB, 554x390px) Image search: [Google]

62KB, 554x390px

>>21909231
welp... that was not at all the picture I meant to click on.

>>21899028
>mods ban ponyshit in a thread where it's actually on topic
>/pol/shit still runs rampant

The fuck? What retard is in charge of /k/ now?

>>21909176
it was a joke

>>21908873

We haven't had any customers dye their lowers. We have had them painted, hydro-dipped, and rattlecanned . Boiling would soften up the material while it is hot, but I wouldn't recommend Boiling it..we've put them in a crock pot on high before to reshape the trigger cavity (Gen One Problems...fixed now) So I would go that route if you are going to be mixing dye in a hot liquid. If the color doesn't hold on 200 degree water, then i would move it up to hotter water, but I would cool it immeadiatly after removing from the hot water to prevent warping. It shouldn't warp at all, crock pot lowers needed constant clamp pressure to deform the material.. so you should be good. These are tough little bastards.

>>21909209
Thats what I was wondering, I didn't know if you guys just glued them in (which is what would have been a deal breaker for me) or if you actually molded it in, which is what it sounds like it is.

How do you make sure that the brass fitting, for say the buffer tube, is aligned and straight inside of the lower? I can't imagine that it is easy, and I could see other manufacturers getting it off-center. Causing a off-center buffer tube.

>>21909112
Gonna ship out today btw. Thanks. Might want to have a paperclip handy to remove the burnt material out of the channels before color fill

>>21909176
>getting this buttflustered over cartoons
>>21909263
/ak/ threads are perfectly acceptable on a daily basis apparently, which are more autistic and pedo than most of the horsefuckers I see on here.

File: Murdercube.jpg (1KB, 85x100px) Image search: [Google]

1KB, 85x100px

>>21909270
>Ctrl+F
>Murdercube
>zero results
Well shit, that's what I want to see.

>>21909311
>posting a picture for ants
>2014

>>21909231
We are starting to get some three gunners to pick us up. So plinkers like our lowers. Frank Proctor is one of the most shootingest guys I know and he loves his. The clear might be lighter, and maybe a little stronger , which would be weird ...but Ill allow it.

>>21909281
ok thanks, any pics of the second pass?

Hey, what do you guys think of lightweight barrels vs standard vs heavy.

i plan on using this rifle for home defense.

>>21909297
so much of this. /k/ is riddled with autistic neckbeard /ak/ fags, the ponyfags and even the furfags here do not compare in faggotry in comparison

File: engraving.jpg (2MB, 2400x2400px) Image search: [Google]

2MB, 2400x2400px

Can you give this one a shot? Would love to see how detailed you can get with text. Definitely thinking about ordering something if we don't have to order 5 lowers per custom design.

>>21909342
I couldn't find a larger one on Google that was that exact picture. If you have one I'd appreciate it.

>>21909277
We just don't throw the ring in the mold, there is an insert..for the insert..Yo Dawg..anyways. It's a round chunk of metal the same diameter as the insert that we drop an insert on then when you drop it in the mold, the pocket it sits in does all the lining up for it. Haven't had a rejection for a misaligned one yet.

File: Ha Ha Wtf are you doin.gif (2MB, 280x175px) Image search: [Google]

2MB, 280x175px

>>21909363

>>21909355
>home defense

Lightweight or standard. All it really matters is how fast your barrel heats up and accuracy begins to degrade at range. For an HD gun you need the lightest, most maneuverable rifle you can get, and you won't be firing hundreds of rounds to 100 yards and farther, so you won't experience heat issues.

For a general purpose rifle that will double as a range gun/defensive rifle, standard is the best middleground.

For a dedicated range gun, especially one that'll be shot at a decent distance often, a heavy barrel is the most practical.

>>21909380
I get what you're saying, thanks for answering

The more questions I get answered the less doubtful I'm becoming of picking several up

File: slowclap.gif (240KB, 320x187px) Image search: [Google]

240KB, 320x187px

>>21909363

>>21909363
>Columbine commemorative AR15

Why though?

Why not a Bath commemorative HK45? Or a Dunblane commemorative HK G1? Or a VTech Mossberg 590?

>>21909420
Because this is for an AR15 lower?

Do we really have to explain this?

>>21909427
I'm joking about the Columbine part though. It doesn't make any sense.

If you want to be an edgy teen, try Aurora or Newtown. The faggots in Columbine didn't have ARs.

>>21909420

>not reading the thread before commenting

>>21909363

Dude...I've got to draw the line somewhere. I can't do that logo.

>>21909392

is there any major disadvantage to lightweight? i mean... longevity wise? i plan on getting a chrome bore for easy cleaning so i can shoot cheap ammo. (i will mostly be shooting it at a range, probably putting a couple hundred rounds through it in a few hours)

im used to shooting slav guns, this is my first AR platform rifle... put together the lower and am now looking to buy an upper from model1sales.

also, im getting a 16" barrel. is the lightweight barrel even going to be a noticable difference? they dont list how much lighter it is anywhere and i only have 1st hand experience with a standard..

>>21909444
What, no Sandy Hook '12 lowers with the Safe/Fire settings No Fun/Children?

>>21909400
Well if you have any other questions . Fire away

>>21909427
But no AR was used in columbine...

It was a sawed off double barreled 12 ga, a sawn off pump 12ga, a tec-9, and a Hipoint 995

>>21909467

he didnt even have a rifle in sandy... it was a bunch of handguns. yet the legislators attack the evil black guns.

>>21909281
I've been tempted to get one of your lowers for awhile now, but damn, does this seal it. Whenever that next payday comes in, I think I'll get a Remover...

>>21909465
Will you guys be making any custom lowers with different patterns for trigger guards, or ambidextrous bolt catch?

Basically, will your future include different patterns for lowers?

>>21909467

my aspergers detector is going off the chart.

>>21909467
No no no... You misunderstand. It's not about the shooting. I just can't stand their football team. lol..That is the only reason I won't engrave this. I won't do anything with Newtown because I lost a couple G's on a kickball game THAT WAS SUPPOSED TO BE A LOCK!! Personal vendetta is why i won't laser lowers referring to these cities.

File: DSC03319.jpg (100KB, 1022x495px) Image search: [Google]

100KB, 1022x495px

>>21909447
>is there any major disadvantage to lightweight? i mean... longevity wise?

Nope, they last just as long as anything else. The profile of the barrel has nothing to do with barrel life.

Some noguns and fudds will say LW barrels have a shorter life, but can't say how, and it's well documented that nothing that kills barels cares about the profile.

AFAIK the difference between LW and standard is about a half pound. Given that weight is all up front, you definitely notice the difference. LW barrels tend to balance out rifles better and point quicker.

I'd definitely recommend a LW barrel for the purposes you're describing, or most builds for regular people. Remember the "standard" profile was developed for automatic weapons. Since you won't be dumping 180 rounds in a few minutes 99.99% of the time, that extra weight is usually just extra weight.

>>21909505
Somebody, make an Aurora logo NOW.

>>21909485
Except that's wrong.

He killed everyone, or almost everyone, with a Shrubmaster AR. He had a G20 he offed himself with. He also had a P226 that, as far as I know, was never fired, and a Saiga-12 in his trunk.

>>21909527
there IS a difference when shooting full auto. A heavy barrel distributes the heat better, and it can take much more heat without damaging the treatment of the metal.
If you are not doing alot of full auto shooting, then you don't need a heavy barrel. you won't see a difference in barrel life

>>21909311
I can make the shit out of that.

>>21909485
>>21909544
Anyway though I agree with

> yet the legislators attack the evil black guns.

That still applies given CT already has a fucking AWB and the rifle was ban compliant.

>hate scary assault weapons
>ban them
>???
>someone kills a bunch of people with a non-assault weapon
>ban assault weapons again

Maybe if they keep banning them they'll eventually go awway

File: engraving 2.jpg (1MB, 2400x2400px) Image search: [Google]

1MB, 2400x2400px

>>21909444

>American company
>not supporting the First Amendment

Then I shall take my business elsewhere, good sir.

>>21909544

they buzzed him into the school while holding an AR15? our news said he had like 4 loaded handguns and no rifles, there was just a saiga in his car.

but the news on that incident was so inconsistent... gotta expect some confusion

>>21909549
I already mentioned the heat issues in the first post. Apart from said issues, which you won't come across unless you're doing a lot of magdumps/full auto and then immediately trying to print tight groups in paper, you won't notice it. The average person will never overheat a LW AR barrel to the point of accuracy degradation through casual plinking, HD, hunting, or even many competitions.

>>21909564
as a private business, he also has the right to refuse to serve you faggot

>>21909529

We're not going to do logos of that nature. Americans dying ain't cool. Commemorative stuff for soldier killing the shit out of the Hajis ..I ll pump them out all day long. But im not an engraving whore. Not going to do anything to make jokes about kids or regular mf's watching a movie and getting killed by a crazy asshole that should have been beaten like the rest of us.

File: AR-131129530.jpgmaxW640maxH480.jpg (63KB, 640x421px) Image search: [Google]

63KB, 640x421px

>>21909568
>they buzzed him into the school while holding an AR15?

Why don't you try reading about what actually happened instead of just making it up as you go?

He shot through a window in the front lobby and walked right in. What mass killer has ever asked to be buzzed in?

> our news said he had like 4 loaded handguns and no rifles, th

The news everywhere kept saying different stuff on different stations before the police actually came out and gave their report. It was a bunch of retard reporters making shit up as usual based on rumor and hoping that when the official report comes out, their BS version is actually what happened so they could have been the "first" to report it.

But yeah, the official report has always been an AR, G20, P226, and Saiga 12. The Saiga and P226 were not used, the G20 was only used in his suicide.

>>21909564

I support your right to make horrible jokes if you respect the right for my laser to remain silent on this one.