>every time I attempt to decorate it looks shit.
Even the magnolia looks like pure white and too harsh. Fuck my life.
>>923499
Paint it yellow if you don't like white
what are good sites or videos to srart learning about hydroponics? also interested in hooking them into using fish tank water
The english wikipedia article is a good start. Using fishtank water ia called aquaponics
>>923495
thanx
Hey, I'm a bit of a stranger to these parts and to DIY in general but I was wondering if anyone could maybe give me some advice. The arms of my chair are starting to come apart after a few years of use*, it's that soft rubbery-plastic stuff and both arms are developing rather large cracks in multiple places. It's mostly along the sides and bottoms so they're still reasonably comfy but in a few more months I wouldn't be surprised if one of them fell off entirely which would be less than ideal.
Since the rest of the chair is in fantastic shape it seems like a waste to buy a new one, I was thinking there might be a way to cheaply repair the cracks. Glue seems like the simplest approach but again I have no real experience with projects so you guys might know something better. I also know that there are many types of glue with different strengths and that some really don't like certain materials so I have no idea where to start there. Any advice? Alternatively if this isn't the sort of thing that can really be fixed I could maybe cut some fabric and fit it tightly around the arms to at least bind the pieces in place when they finally disintegrate, that might even up the comfort levels a bit. Wouldn't mind some advice on how to go about doing that either if the first approach isn't feasible.
*It's all my fault, I'm one of those weirdos that tends to slouch heavily, lean on an arm or sit cross legged in the chair at times instead of just using it like a chair. Shockingly it was not designed with that kind of use in mind.
I had this exact same problem with my chair (which looks almost identical to the one in the picture). I looked up the manufacturers phone number and gave them a call to find out if i could order new ones. Instead they said the chair was still under warranty and sent me new ones for free. I had no proof of purchase, just gave a guesstimate date of purchase. Hope this helps!
>>923455
Oh wow, I hadn't even considered that. I'll have to make a call, thank you.
Just cover them in fabric
I have a Max Air compressor. How do I connect the valve to the compressor?
>>922371
Need to see more of the compressor OP
>>922371
>I have a Max Air compressor. How do I connect the valve to the compressor?
You could use any line with the correct end fittings, but normally there is a copper line connecting the compressor to the tank.
Pic related: on a better brand, the hard line will have some kind of heat-radiating fins on it. I dunno where to buy this stuff tho; I've only ever seen it in compressors and HVAC equipment. ....Smooth copper line will work also, if that is all you can get.
>>922371
it appears to be connected.
Hi dinosaurs
I have pic related. It is broken and won't build pressure past 100 psi, and motor won't cut off. I have already bought a replacement. What is worth salvaging off of this thing, versus just scrap metal?
>>922336
The receiver. You could have it in line from your new compressor and have a potentially larger air capacity.
Sounds like its just a seal or maybe the release valve. Fix it.
>>922340
I had thought about this. I was thinking of mounting it somewhere and building a shop system with one of those iron pipe condensation radiator setups. I tell myself I don't have room right now, but then I tell myself that shouldn't be enough of a reason to scrap metal the thing.
Hi guys, I need to know the meaning of colors of this piece to connect my new sound system, my truck is a ford ranger 2000, can you help me?
>>925087
Google: 2000 ford ranger radio wiring diagram
>>925089
Thanks!
>>925096
You're welcome. Hope it sounds good after you hook it up.
So, I bought these Gedore screwdrivers and they are getting a little rusty where there is no vanadium coating. Is it normal? What can I do to prevent this? They are stored in my drawer and they had no contact with water at all.
Thanks in advance!
Motor oil or grease will prevent rust on tools
yep it's a good idea to give tools a light coating of grease or oil
>>924999
>They are stored in my drawer and they had no contact with water at all.
The moisture in the air car be enough to rust tools. A coat of some kind of oil will do as other anons already said. Or you could just clean the rust off with light steel wool whenever it occurs.
Hey DIY how goes it,
Let's see some of your handy work DIY
Please keep in mind:
- This is a SFW board. No fleshlights or other sex toys.
hahahahaha good one
>>924719
"Late night prototyping" more like "shitty pictures cant see anything"
what if you make an RC plane's wing by first constructing some ribs out of balsa wood, make them all stick together with some carbon fiber rods, and then put some type of material over the top? What material though?
>>924651
if we're already looking at carbon fiber rods, why not do the foam core with epoxied carbon tape on top thing?
Even if not that, I'd look at some sort of cloth or cloth-like material I could add rigidity to, like fiberglass or something.
>>924653
I've seen it done with cling wrap like material before
>>924651
Wow, never thought this skillset would ever be used again.
You don't need carbon fiber rods for the spars, you can use something like birch.
To cover the wings an fuselage, you have choices. There's traditional paper-and-dope (it's a special type of paper), or silk-and-dope (stronger, but heavier and more expensive, and as I recall a little harder to work with), or there's a type of heatshrink plastic, but you need special equipment to work with it, namely a special type of heated iron to stick it down to the wing skeleton, and a heat gun to shrink the stuff, and it's not foolproof, if you get it too hot it'll melt through and then you start from scratch.
The main thing about covering the bones of the plane is that the covering has to be *tight* or it'll screw up the aerodynamics, and especially the wings have to be free of ripples. Takes a some practice and patience.
where does /diy/ get their phone/tablet replacement parts? gonna finally fix my nexus 7's busted screen but id like to know what peoples most trusted and/or cheapest sources are. pic tangentially related.
Chinese ebay
From China.
EBay. Haven't had any issues with the part not working, they work perfectly.
Only issue is they feel cheap, but a screen protector should fix that.
I have a pair of old combat boots with very worn soles. I love the damn boots but they are too slippery to wear in the winter
Is there anything I can do to the sole (other than attaching climbing spurs) to make it have more traction in the snow? any ideas?
thank you
Take them to a cobbler? Honestly, that's all I can think of.
>>924513
ive got an old pair of combats for winter boots too
i think theyre slippery because the rubber in the sole is very hard to begin with and you use them in winter temps they lose all grippyness
Screw new soles on and say "fuck it"
Hey /diy/. I was wanting to make a costume with this sort of hat thing to it. Any ideas what it is called and how to make one? Posting in here because I didnt know if this is the right thread, but you guys seem to know how to make things. Sorry for the weeb pic. Only one I can find
>>924204
/cgl/ is pretty decent at this sort of thing
>>924209
Thanks!
Hey there DIY, I have a question for you guys. So I bought this Jiu Jitsu dummy at a yard sale, normally these are pretty expensive but I got it for like $25. It seemed pretty good except that it’s not completely filled in some areas so I figured I’d get some scrap cloth and beat it/press it into the dummy with a baseball bat and fully fill it. Well I tried for about 6 hours and could just never get the lower legs to fill to a point where I was happy with it. The lower legs were filled at the factory and are hard, but the upper legs no matter how much I tried to pack in scrap cloth would never get to that same cloth density as the lower portion. I believe that they probably used a hydraulic press to achieve this level of fill density. I’m thinking about getting a 20 ton shop press at some point and maybe using a baseball bat as a die of sorts to compress the material into the legs/dummy. Would this work? Would you guys have any other ideas for me either how to fill it without a press or tips for filling it with a hydraulic press? Stuff to watch out for? Maybe how to avoid tearing the dummy material with the press?
Err could never get the upper legs filled to a point where I was happy with it, the lower legs were fine*
I would install a fleshlight.
That said, look up how to stuff a duvet. I doubt you would struggle to fill it with 100kg of cloth by hand.
I'll take a look at that, but honestly I tried smacking it with baseball bats, shoving in more and more cloth with the tip of small wooden dowels etc nothing could get it compressed enough. I really think the shop press is the answer.
https://youtu.be/K3pd-wxNEKQ
if you dont think this is dope as fuck you can get the hell out
>>924006
I will use this info with all this snow we have in the midwestern us
>>924006
Are you sure this deserved it's own thread?
This is a slow board, and these one post threads just bump another more developed thread into oblivion.
>>924033
I agree. Who comes here to see "dope vids"
clickbait?
Hey /diy/
Lately i had this idea to try and sculpt a mask as the one in
>pic related
Never done something like this so i would like to have some advices and suggestions by you guys. Like: where do i start? What materials do i need? Tip For better results? Also if you have some video tutorial it would be great
Lrn2 CAD and 3d print noob.
>>923956
you could reply to any thread like this
>Lrn2 woodwork noob.
>Lrn2 lathe noob.