What is the best or recommended way to sharpen your bigger tools. Like axes, cleavers, machetes etc. What's your favourite technique to achieve good and sharp finish?
If it is really badly blunted I use a grinder the lop off some material and then use a cutlass file to file it down sharp enough that it will pass a nail test.
>>944114
files
belt sander
japanese stones
etc
I have an AK platform bayonet, and the metal is fucking hard. Apparently a normal knife sharpener won't work so is there any other household way of effectively sharpening this thing without ruining it?
First time poster here, i found out that ive seen more and more people that spend a lot of time in their computers (mostly for entretainment) that usually have either a race car seat as an office chair or an office chair inspired by its design and materials, so i took up on google to figure out why, but all i could find were websites that sold them.
I dont even know if this is the right board, since there is no furniture board, but if anyone knows, why is it that race car bucket seats are becoming the new high-end office chairs? is there any particular reason or something?
Because they are cool and gamer companies have to sell useless shit to fat fucks to make them feel cool and sportive .
>>942839
Hey mate i did it, it was out of necessity as my old office chair was all torn up and falling apart. So i had 2 seats laying around for a car im building and used 1 of em for my office chair. Havent got a pic on my phone but used an isotta talladega seat, came up really nice.
>>942841
So is there no real advantage in design or materials other than the looks?
I plan on painting my basement, but we have these tiles (which quite frankly I am not a huge fan of). All these "interior design trend" sites only account for rooms that have dark wooden floors and what not. Can someone help me out?
egg shell white
>>946183
well damn, that's what color they are now
what if I just got a big rug? Would that be tacky? I really don't like these boring white egg shell walls
Does anyone know of a transparent material that I can print on to that is water proof and will not bleed into water?
I was thinking acetate printed on with standard ink. Would that bleed off at all?
Basically what I am looking to do is fill a jar with water, and put a transparent material with an image printed on it inside. I was also thinking maybe just laminated paper, which will seal off the water. Any ideas?
>>946067
if its waterproof material then obviously a standard orinter isnt going to cut it as the ink wont be able to penetrate the material to stick. best bet it to laminate it after printing. as long as its laminated properly and sealed it will remain 100% waterproof
>>946067
shit I forgot oto mention you can print images on transparency film.. they make this for inkjets and THEN laminate that. that way you have a transparent everything.
>>946074
Will look into it! Think I will go with transparency film + lamination. Thanks!
Hey guys what is this buildup and how do I get rid of it.
It has an crater-like texture. It's only been a week and is been in a clean environment. No water spills or anything of the sort
>>945882
Looks like its been sandblasted. Do you live near the beach
My head lights on my car looked the same after 6 months of living 100ft from the beach
>>945882
looks like fly shit to me, they enjoy the warm transformers
>>945882
Do you drink a lot of soda?
How would you go about drilling a hole in a glass bottle without shattering it?
I dont have any diamondtipped drillbits or other specialist equipment.
Uhhh, could be tricky.
But I would try packing it tight with fine dirt or something similar, then drill it as slow as possible with a small bit while keeping it wet to collect the glass dust
>>944974
Use a pointy rock
Plasticene or Blu tack ring around where you want the hole. Fill with light oil - cooking oil will do. Masonry bit at low speed. Scraping some grit off sanding sheets into the oil will help.
Hello, I've been trying to see what's wrong with my rotary tool. It makes a lot of noise on power option 3-4, but sounds healthy on 1-2 or 5-6. I tried taking off all attachments and tighten the spindle as hard as I could and the rotary tool sounded healthy on all power options.
I've come to the conclusion that the diameter of the dremel attachments don't allow me to tighten the spindle lock all the way which makes the sound unbearable at some levels. I've been thinking I might need another collet but would like some information before I buy.
The attachments (I've tried with several) are said to be compatible with my rotary tool. pic related.
Whens the last time you changed the oil in it?
>>945939
It's practically new, and I have a feeling it can't be the oil when it sounds fine without any attachments.
I wish I had thought about this board earlier, because /mu/ was of no help whatsoever.
I got this thing new for like $75 and I’m gonna build an EVH Frankenstrat out of it.
I already got the spray cans but I can’t find a Frankenstrat paint tutorial or template that’s simple and easy to follow. Every video just shows a sped up clip of the guy taping the guitar and most templates don’t follow steps, pretty much like “just put the tape and spray, faggot". The ones that kinda do show how to tape it have relicing involved and I don’t want this replica to be all beat up like the others. No cigarette burns on the headstock or anything like that.
It sounds like a pretty simple thing to do but I really don’t wanna fuck this up and end with a different pattern than the original.
So… Experiences with Frankenstrat builds? Or templates that could actually be useful?
Also, tips on installing a mounted (just dive) Floyd Rose would also be appreciated.
>>945773
First order of business is to pull the pickguard up and see how the routing looks.
A lot of those cheap guitars have swimming pool routing which obviously isnt going to work with a EVH replica.
And as for installing a 2 pivot bridge on a 6 screw pivot body, you can just drill the outer holes bigger to install it.
Painting it really is as simple as laying tape and spraying. It cant be that hard to figure out what order of paint to tape to get your desired results.
>>945773
>Frankenstra
For paint, the biggest thing I think is the order of the colors.
I'd basecoat it in black, white mid coat, and then red for the top coat.
You'll paint the entire thing black, let it dry entirely, put tape down everywhere you see black/want to see black. Then paint it white and let it dry.. Put your tape down where ever you want to see white (coverage on each of these layers will be a bitch btw...maybe use selfpriming for that extra color thickness?)...then paint the fucker red.
Pull your tape, buff your layers down, then throw a clearcoat over it.
As for a template, just print out a picture of it in black and white and full sized (will have to be printed across multiple sheets).
>>945773
Eddie went Black, White, Red. He made special note to say that it was Red Schwinn Bicycle paint though. If I were you though I'd turn that into Yngwie's guitar Duck, everyone has seen a Frankenstrat, but build a Duck and scallop the fingerboard and you'll have something special.
What is something cheap and something I can paint, and cut with a utility knife to replace the back of my entertainment center? My gfs cat is has started to scratch it
Wat do
>>945629
Its called wood filler
>>945632
It's not wood and not solid. Its like cardboard but with fiber. Not sure what it's called
>>945633
Nigger, its MDF
And you are going to put wood filler on it, sand it down and paint it.
My favorite rust preventative/ general use lubricant has been discontinued for a while now ;_;
I'm still searching for a product that beats it. Now I either suffer rusty tools or tools that grow fur from the dust sticking to the oil.
What do you use? .
>rusty tools
you're buying the wrong tools
>>945433
I just use INOX MX3. You Americunts might not be able to get it tho.
id like it to be $500-$600 down Aus moeny btw
Go to /g/.
/diy/ is there for you if you actually plan on making something.
Or we really need a stupid question general for such posts.
>>945045
logicalincrements.com
>>945047
Actually use /wsr/
>/g/ is not your personal tech support board
Posted this on /k/, got no decent response.
I'm going to make an airgun pellet trap as in pic related (not my design btw)
Now, I want to replace the steel backing plate with Lexan, because I'll be using silhouette-style targets and that'd mean I'd have to repaint the steel backing plate over and over again.
I want to be able to use this thing indefinitely. I'll be using a Diana Mod 75, which has about 7.5J(5.5 ftlbs). I'd like the backing plate to be able to take at least double that, so 15J/11ftlbs.
How thick should that Lexan plate be? I can't find any penetration tests with airguns that I should go by, and this stuff gets exponentially more expensive the thicker it gets, so I want to use the bare minimum.
Also, do you guys think it'll scratch eventually? Would angling the backing plate result in a significant reduction in necessary thickness?
>>945000
Similar design I found. This is supposedly capable of taking 1000ftlbs. It's also got half an inch of steel backing plate, and it's angled a lot more too.
>>945001
Now, what you're seeing in pic related are the full-size bullet traps. They get hauled up to the top of the poles, and then shot at by a 12 gauge single shot bolt action rifle. It uses a 39mm bullet (overall length), and it's about a 35 gram projectile going at a maximum of 230 m/s (540 grain, 750 ft/s. Total energy of about 675 ftlbs/900J).
>>945002
Targets look like pic related. You want a clear background because we're using standard Olympic style sighst, so no magnification, and a diopter and the rear and a globe sight at the front. I'll post the gun we're using next.
What I want is a similar setup for airguns for indoor winter practice. We're using standard 10m olympic-style target airguns, with the exact same sights as the full size guns. Now, the downside is that all the airgun bullet traps currently in use don't have a clear backing plate, which means it's not 100% similar to the fullsize shooting we're practicing for.
Pellets are standard lead 4.5mm/.177'' flathead diabolo's shot from several different airgun models, all in the 10J range.
Haven't done this in some months. Got questions? Want to bitch about something stupid (I'll probably mock you because you think the kid making tenbux an hour is supposed to know how to build a windmill and rage that the bigbox corporate retail associate can't assist you in your esoteric question)? Work at menards or lowes or whatever and want to commiserate?
I've worked in a few departments now - paint, services, etc. and know most of the store at this point.
Is it depressing? Do you enjoy getting to help people?
>>935541
nah, i kinda like it. it's not a stressful job, has adequate benefits, is an absurdly easy commute and yea, i do like helping people.
Also used to work there. Job was pretty decent. Liked co-workers. Hated management. Left because they couldn't pay me enough to stay.
Now thanks to their shit corporate hours they lost like all of their part time workers who actually gave a damn. All because they didn't want to pay for their healthcare.
I worked in flooring mainly but pretty much just went to where I wanted to work that day.
This lightsaber broke and I want to repair it. The blade's LED strip has been cut and the LEDs only lit up half-way. This is the Anakin to Vader Ultimate FX lightsaber, incase you needed to know.
>>945312
Can we get a not potato quality pic of it in daylight, with the LEDs off, prefably focused on the break?
Just guessing here though, the bit that broke was probably a power rail and will need to be soldered back together.
>>945342
fuckin' phone upload dropped quality right the fuck off, sorry. It's split right at the LED which stopped working a while back.
Of course it's broke!! You need a crystal not a LED.
What system are you in? Dantooine has a well known cave full of crystals.
What kind of sensors and other stuff do I need to achieve this?
Let's say those red and blue boxes are steel bars.
Red bar is fixed, blue bar slides up and down.
I need to attach a measurement to them so I know how much blue bar moves relative to the red bar.
I'm looking through industrial stuff on rs-online but I have no idea what do I need.
A rotary encoder would do the trick.
Like I told you on/g/, faggot, google for a linear motion encoder.
a laser mouse would work.