Dear 4chin
I recently purchased a good quantity of beer making ingredients but forgot what type I was making. So here is your chance to to help me brew some quality 4chan homebrew "Much Wow" I will post the ingredients and you post the quantities to make a five gallon batch. I am in possession of two carboys so we could make two batches and I will post every step up to a complete beer. Comeon guys lets do this!!!!
Note: I will not put any piss, poop, or cum in this recipe
Malts and grains only haveone kind of yeast will post list
Hops
Liquid Malt Extract
9lbs sparkling amber LME
3lbs CBW golden light LME
Dry Malt Extract
3lbs Briess CBW golden light DME
3lbs Muntons Plain Extra Drak DME
Grains
1lb Muntons Crystal
1lb Crisp Pale Chocolate
Yeast
safale s-04
Hops 1oz pkgs
New Zealand Pacific Gem, New Zealand Cascade, Chinook, German Hallertaur Hershbrucker, American Centennial, American Golding, Pilgrim, German Perle
Mix Away
$1 cable from china.
Don't know what I was expecting but it was nothing like this.
>>952887
>$1
>from china
What do you expect
>>952887
>$1
>from china
dont expect
I'm using a $10 soldering iron at home and I still solder better than this.
At work we just got a 3-axis CNC machine. I'm just making some flat parts on it now, but, I'd like to get creative. What are good places to get inspired or get new ideas?
Also any tips for new CNC operators/programmers? I just got trained and I'm a bit scared. Seems like a lot going on.
>>952818
There aint shit going on.
Get some software, draw some shit, cut some shit, sell some shit.
What is attached to it?
Mill, plasma, laser, fiber, o2?
>>952823
I have Alphacam and getting the hang of that. It's a bit overwhelming with all the different bits and such. What bit to use where.
I was thinking of trying to do some mitre joints on it with a onion skin on the bottom. So then I could make a box by just folding up the sides (using PVC as the material).
I'm mostly cutting HDPE, PVC and plywood.
>What is attached to it?
Oh sorry, it's a router. Actually pic in the OP is basically the machine. It's a 12x5 table (145x61").
Sorry if I'm hijacking a bit, but figured there's no need to make a separate CNC thread.
Was thinking of graduating from simple electronics/uC DIY into something more physical.
Figured getting myself a CNC would be a good stepping stone into making other stuff.
Anyone could point me in the right direction for good DIY CNC resources? Google seems to give me some dubious hits.
And how much would I be looking at? I'm fine DIY'ing mostly everything, though I've never done anything similar.
I just cut down a big ass apple tree and would like to do something with the wood. I already cut the logs up to about 4.5 long to make them manageable, so I don't have anything longer than that.
I could put a ripping chain on my chainsaw and try to make boards, but I've never done it before. Don't know how well that will turn out.
Looking for any ideas or advice. Do I have to cure the wood somehow?
Also, I have access to a woodworking shop. I rent it for storage while the owner is away in the winter. He said I coud use his tools, but I'm not a carpenter and don't know what half the stuff is.
Anyway, any ideas for a project would be great.
Pic taken from the internet
This is pretty simple, I'm sure I could do it. But won't the wood crack when it dries?
>>952740
Keep the off cuts for the bbq to smoke yer meat
>>952745
This
Just bought a 2003 Honda Civic Hybrid.
Needs a new IMA battery (fancy that).
Looking for the cheapest possible solution; have seen a lot of articles and info otherwise around the web suggesting a DIY fix is not only possible, but significantly cheaper.
This source seems helpful: http://ecomodder.com/forum/showthread.php/diy-solutions-honda-hybrid-battery-problems-insight-civic-13610.html
any of you dealt with this sort of thing before? Looking for all the tips I can get. I plan to do this myself (:P)
Do you have a multimeter and tools? are the batterys marked with make and type? If so then yes, you should be able to repair it yourself
>>952573
https://www.youtube.com/watch?v=z3x_kYq3mHM
>>952573
Unless there is some sort of microcontroller in the pack(s), similar to what a laptop battery has, that will brick the entire pack if you de-power it (by disconnecting the cells), then it should just be a matter of replacing all the cells with the same part number, preferably from the same manufacturer. Theoretically, that is.
This might be a bit weird but maybe someone will know this stuff better than me. I need to re thread this wooden screw in handle, while keeping as much of the original parts as possible. The 1870's threading must have worn out, and the previous owner had glued the handle in place. I managed to separate it and I intend to re thread both the handle and receiver with nice metal hardware.
My original plan was to use a drill and expand the hole, and crazy glue in a nut. The wooden handle will have the wood screw part sawed off, and a new metal bolt in it's place, which would then screw into the nut (and can be unscrewed, like the handle was supposed to)
I then researched metal threaded inserts and thought it would be a better idea, but none are the right size.
The hole in the receiver is about a third of an inch wide, and a fourth of an inch deep.
the original plan sounded pretty good actually
>>952460
Everything sounds good except the nut part. They do make metal sleeves with threaded insides just for such a purpose. I'd use one of those.
Pic not exactly related but best I could google up without trying very hard.
>>952531
I looked at these but I would need one custom cut at 1/4'' long. (can any online stores do this?) Another option is a plastic insert since I can file it down, but it doesn't seem like they exist without metal threading inside.
With tax money coming back soon I convinced my wife to let me blow my load on some tools.
Just starting out on my own so high end shit is out of the question. But im also not looking to get cheep crap that breaks on me.
My dad says to buy dewalt, Grandpa says to buy craftsmen, Uncle says porter cable, mechanic brother says snap on ect ect.
Help me out here.
Not doing daily construction work or anything. But i would like my tools to not break on 1st or 2nd remodel.
The Craftsmen C3 line looks decent. As dose the 20 volt portercable line.
Should i go cordless or corded? Cordless ill have the added expense of batteries. corded ill have to have power anywhere im working and be unpluging and pluging in tools.
>>951984
I have a handfull of toys.
>table saw
>compound miter saw / chop saw
>router + table
>orbital sander
>an ok number of hand tools (wrenches, socket sets and the like)
I have always liked doing wood work and see my chance to get some stuff to be able to start doing that on my own.
Im look at a jig saw and some drills first of all. Also keeping an eye out for clamps, chisels and files and some other odds and ends.
>>951987
Are you OP or not, I cant tell.
>>952001
Yes i am ok. First 2 posts and this one.
Am very tired and my bodys on / off switch is getting ready to turn to off.
Anybody here have any experience with casting aluminum? How hard is it? What might be some occurring problems? Also if you were to join two pieces would you braze it or weld it?
>>950764
Google myfordboy or mrpete222 (or tubalcain). Both do a pretty good job casting aluminum. Myfordboy does more mould prep, but he doesn't talk, and makes it look WAY too easy. Dude goes from nothing to a rammed up mould in like, 5 minutes it seems.
Thanks bro
Don't have a pic, but I used the lost foam/wax/plastic method to cast a model engine block once. Basically the process is this:
>make a flammable/meltable version of what you want. I 3D printed mine in PLA.
>attach sprues
>seat in the center of a mold
>make 50/50 mix of Plaster of Paris and play sand
>mix in just enough water to make it flow easily
>pour into mould
>let set
>clean up the area around the sprues so metal will flow into them more readily
>heat forge built in separate project
>leave mold in forge for an hour or so with airblast
>turn air off, leave mold in the forge overnight
>tadaa, cavity of what you want
>pour in molten aluminum
>break open mold
That's the idea. Google "lost PLA casting". Beyond that, it's mostly trial and error to figure out the best way to design and orient the part, sprues, vents, etc. Keep in mind you should fill from the highest point and have a place for the air to go. Gaps smaller than ~1 or 2mm are going to be hard for the aluminum to flow into. If it's a complex part, your best option is to cast a rough shape and machine the rest.
Hey so I'm thinking about building a portable shed (basically just putting wheels on it to avoid taxes) and was wondering about trying to do a thin concrete floor. I was going to go for a 2"-4" layer but didn't know if that sounded like a bad idea or if there may be any unknown complications in trying. In case it make a difference I was going to do a 6'X8' floor. Thanks in advance.
Id be concerned with the weight on the casters if you actually intend to roll it around.
What's wrong with timber?
You could tile it i think.like the floor in some enclosed trailers.it would give you the same benefit without all the weight.
Sup guys have this old bike that was sitting for about 9 years, before it was sitting it had a bad back tire and tube. What would need to be gone through to make it operable again? I plan on using it for local bike trails and such. How much could this cost me at local bike shop?
>>949749
Don't bother with it. The drive train is rusted to shit, the tires and tubes are shot, the suspension is a joke, the brake lines will need replacing and its a shit $99 dollar Walmart special to begin with. You will literally spend more on good tubes and tires than that thing is worth in its current condition.
Get yourself a good quality bike used off of CL or at a yard sale or something and fix up that.
>>949749
Really, all you need is a new tube and tire for the back wheel, and likely a new tube and maybe tire for the front wheel, depending on shape.
You should probably put on a new chain, too.
Ignore what >>949756 said, New tubes and a tire would only cost you about $30, it's new rims that are expensive. You don't need to buy super high end racing bike shit.
>>949761
you think brakes and shocks should be good?
I came up with a new motorbike helmet concept that utilizes panels with large springs under them which deploy when triggered by hitting the ground, thereby increasing the impulse of the collision between head and ground/object.
Benefits are a much thinner and lighter helmet with more protection.
Rate my idea.
>>954073
triggered when it hits the ground would be too late.
>>954077
The triggers would be poking out of the helmet like darth mauls spikes on his head
Kind regards, brilliant inventor who ran out of space on the pic.
This is both retarded and brilliant at the same time
/diy/ not sure how many threads you get like this, but...
I'm tired of my career. I went to school to be an English teacher and it turned into a solid dead end. Graduated with my Master's in English Education in 2008 into the height of the recession and housing crisis. I hacked it out as an Adjunct professor at a local Community College making peanuts and wouldn't have been able to survive had my parents not made up the slack in my pay.
I later went on to work at the family business in insurance because the money got so bad and there were few if any opportunities to be had. I've worked for the last 4 years as an Insurance Consultant, and I've done a huge variety of work beyond advising clients on health insurance - worker's comp adjuster, paralegal, risk manager, and more.
At the end of the day though, it's all smoke. I give the client advice, they pay the firm, the firm pays me about $15 an hour. Every now and then my dad tries to slip me some money under the table to make up the difference, but living on the charity of my father has gotten old as I've crossed 30 years old. I see peers in law and similar professions making double or triple what I am, and moreover: enjoying their work. Me? I'm no slouch at what I do (important clients wouldn't have stuck around if I didn't do good work) but getting paid a pittance in comparison to the market and working for dad has long since worn on me.
So I want to make a change - before it's too late. Before I truly get too old and there's no turning back. I'm 31 right now.
Always wanted to make something with my hands - something useful using a body of technical knowledge. I've looked into stuff like welding, or a similar trade in fabrication. Something where I can use my skill to create a useful, practical product. In insurance it's all too often the sum of your work just winds up being a piece of paper or words in a contract that people gloss over.
This a pipedream? Any advice?
Check out the options for trades training in your area. Welding, from what I know is the easiest to get certified. A friend of mine makes $25 an hour for it.
You may have to look hard for info though. It took me forever to find info on a electrician apprenticeship program in my area.
welcome to the new 'merika my friend.
This thread is relevant to my interests. I'm in a very similar position at 30. In Europe, but I don't think it makes much of a difference.
So my life plan has kinda fallen apart lately and I find myself thinking about picking up a trade.
Background information. I'm almost 25, very little shop experience, over the past year have gotten into DIY stuff for fun but am still a amateur. Pretty much was planning on going back to uni in September, but just got fucked out of a large sum of cash and am starting to think going to school until I am 31-32 and ending up in $80,000 or more in debt isn't a good idea. That I should just move on with my life and find work that pays and afford to move out with the GF and start life.
I live in southern Ontario by the GTA.
Anyone have any advice? Trades they would recommend? I don't want to have to travel or move. GF is a welder(same boat as me, her life plans fell through and said fuck it and went to trade school last year) so I figure I should stay away from that trade, don't want both of us out of work should something in the market happen.
I thought machining or tool making looked interesting. I know plumbing pays well but it doesn't seem all that interesting.
Welder: Easy cert, available from many CC's. Crap job conditions; hot, industrial. Average pay.
Electrician: More difficult cert, requires on the job or tech school. Conditions highly variable, but generally not crawling around in dirt (eg, plumber). Good pay.
Plumber: Highly variable depending on local businesses. Lousy work conditions, good pay.
EMT: Easy cert (6 weeks from a professional school, 1 year from a CC), work conditions vary immensely depending on who you work for. Comes with a large self esteem boost and automatic respect of peers. Requires strong stomach and ability to temorarily deactivate empathy on command.. Average pay. Large opportunity for advancement (if you upgrade to Paramedic)
Cop: See EMT, remove strong stomach.
Auto mechanic, diesel mechanic, aerospace mechanic (yes this is a thing in some cities), HVAC technician. Etc so fort and so on and whatnot.
if you wanna work in manufacturing, move to china. if you wanna eat, look for gigs where you take care of old people in their homes. under the table: no taxes for Wynn to waste. word of mouth gets you more clients than you can handle.
old people are the future. and the past.
Machining and tool making jobs are increasingly becoming more scarce.
Robots and China are stealing our jobs, ect.
Electrical and Plumbing pay the best. HVAC pays less, but is easier to get into.
TLDR: How to safely encapsulate fragile popcorn ceiling with non-toxic paint?
So I'm living under this old popcorn ceiling which hasn't been painted over since it was sprayed on over 50 years ago. Behind it is rough unfinished ceiling. It likely contains a small amount of asbestos, as was common in the '60s, and I am worried what would happen if there is another epic earthquake here in Cali, and thinking about all the times during childhood when I threw things at the ceiling, and other times accidently scraped against it.
I really want to just get the fuck out of here, but am NEET with no connections and little money. I repeatedly asked my mom to get them to paint it- the buildings hallways have it painted over so it doesn't break off pieces if you accidentally the ceiling, but since it is rent controlled apartment its not something they would do. Is there a way I can paint the ceiling myself, without disturbing the material and creating toxic dust? Spray painting probably. I rarely lurk here and have no experience with this sort of thing.
Random pic, but same thing.
Also, I curse my mom every day for not knowing about the dangers of this shit and telling me not to fuck with the ceiling. I was completely unaware of the dangers until I looked up on google last year.
This $20 electric paint spray gun is probably your cheapest option -
http://m.harborfreight.com/51-gph-electric-paint-spray-gun-60446.html
The reviews are 50/50 so you may need to mod it a bit to be able to use it upside down. Maybe unscrew the paint cup holder and run a seperate plastic tube into it instead to feed the paint. You'll also want some plastic drop cloths from Home Depot, they're about $2 for a 9' x 12' thin plastic tarp. Use painters tape to mask off the top of the wall where it meets the ceiling, then tape the tarp just below it to cover the wall and floor. You're biggest enemy here is gonna be overspray. Any paint that doesn't hit the ceiling is gonna fall back down and get all over your floor, walls, furniture, or whatever else. Work in sections, one room at a time but you're gonna have to mask the shit out of everything.
Or just get an asbestos testing kit and if it comes up positive boom it's your landlords problem. Pretty sure it's illegal to rent an asbestos cover place
Is it flaking off currently?
The key with asbestos is if its in good condition leave it the fuck alone. it should be easy to avoid further damage.
If you really want to paint it then Wear a full disposable boiler suit and correctly fitted/rated dust mask.
>>950994
Maybe your mom didn't know about the dangers of asbestos, or even that the ceiling had asbestos in it.
Anyway, paint roller and an extension pole.
I want to build myself a VR headset, and Im wondering which of the many ways to do this is best. Right now Im thinking that copying OpenVR with a better screen would be the easiest, as Vireo Perception works pretty well and all the software is ready to go. On the other hand, it is possible to clone a legit Oculus Rift by using that one ARM board and doing some black magic with EEPROMs, though I dont know if it will be worth having something that will work with stuff designed for the OR in the long run when it's just a fake dev kit 1. Anyone ever attempted this before?
>>950977
why the fuck isnt there open source virtual reality yet?
>two screens
>two lenses
>two game cameras that view things from a slightly different location
>bool accelerometer = is_accelerometer_present();
>if(accelerometer) do_motion_things();
>else continue;
>if(gyro)
>if(ir)
the whole damn thing could be customized with as little or as many features as you want.
its outragous that 3d printers have a diy cult following but nobody is doing shit with VR
>>952178
I'd tottaly support an open source VR device.
But to be hosnet, you don't need 2 sceens, just split one, lenses need to be adjustable too. The hard part is getting the motion sensors tuned up. But i figure someone way smarter than me can iplement acelerometers and gyrometers?
The softwere is the easy part. Reverse engi some of the stuff that's out there alredy. Edit it enough to a point where you can relese the shit under an open source license pada bing bada boom
>>950977
China has.