Archived threads in /diy/ - Do It yourself - 359. page

>>1075103
>Electrical wiring
>perhaps some good tutorial

lol

call someone who actually knows what they're doing, ie. has a license

>>1075103
Look at the code in your area. That is the minimum level of safety you need to build to. Done. You want to put in some fancy stuff or nice features? Thats a different story. For safety though, the code is a a great place to start.

Really vague there buddy

OP that's not Saint Pepsi, that's MOON MAN!

File: moon man blastin with an ak.png (631KB, 1366x768px) Image search: [Google]

631KB, 1366x768px

>>1075063
That's Moonman, the leader of the Triple K Mafia, but he sometimes goes by the alias of Mac Tonight according to my top secret contacts in various 3 letter agencies. You might have better luck finding a design using one of those names. Your best bet would probably be making it out of foam board, or some resin re-enforced paper. Unfortunately, I haven't been able to find a moon mask papercraft that could be modified, so you would probably need to find either a face mask to modify, or start from scratch. After figuring that out, you could get some novelty giant glasses at a costume store for the finishing touch.

>>1075063
>SAINT PEPSI

kys newfag, that's moonman

>>1074855
what will you be bringing with you?
if you start with nothing make sure everyone has at least basic knowledge of survival skills.
consider making bows/spears/atlatals (/k/ stuff) learn how to build basic shelters make fires ect

>>1074855
>crowed funding
>survival

off to a great start

>>1074858
Well we are hoping to start with basic tools, some firearms, food for about 3-6 months and a boat to travel to neighboring port for trading. The main problem is the funding and support from volunteers. We're hoping to get about a hundred. .

Nope

Fuck no.

>>1074594
Waste of money.

Just make a DIY one.

>>1074467
Its landfill
The onboard chip has been programmed to report 64gb to all inquiries while lacking the physical space. As soon as you run out of physical room the chipset shits itself.

Report the seller for fraud to ebay and paypal in your control panel's purchase history.

Keep it in case they demand you send it back for your refund.

I know its too late now, but never buy memory cards from third parties. Only established online retailers or brick and mortar stores. If you're buying on a site like Amazon, verify that it is "sold by and shipped by Amazon. And if you're feeling particularly adventurous, by it from ebay, but NEVER EVER from China.

Yeah, throw it.

You want a Mixza instead, /g/ tested and approved.

>>1074468
>Report the seller for fraud to ebay and paypal in your control panel's purchase history.

This.

You will get your money back in full including any shipping. The amount of effort into trying to correct the issue isn't worth the headache for a 2gb card.

File: IMG_20160709_190710.jpg (751KB, 1944x1944px) Image search: [Google]

751KB, 1944x1944px

Muh bench, not pictured is the table saw that sits at the same height so I can clear off the bench for an out feed table for long rip cuts.

>>1053189
Why the fuck did you despoil this nice woodworking bench with a bench grinder and metalworking vise? That stuff needs to go on a separate bench. Especially the bench grinder, since on top of covering everything in dust - which you just might not give a fuck about - it blocks the end vise.

>>1054058
autismintensifies.jpg

File: Screenshot_20161028-093929.jpg (680KB, 1157x845px) Image search: [Google]

680KB, 1157x845px

>ideas

File: 20161028_094616.png (568KB, 1439x1021px) Image search: [Google]

568KB, 1439x1021px

>>1076793
Fuckoff with the spam Hiro. And ENOUGH of the dns attacks. Suck my dick man... pic very related. Add below post is broken and therefore even more useless than fat pills or japanese lube.

>>1076723

Less than 25.4, more than 0.

>>1076723
Most ridiculous and poorly worded question ever to be posted in DIY I think and that's saying something.

>>1076723
wrong board

go to /sci/ for math questions

>>1076670
>advice for modifications for this?

You used perspective on the truck body, re-do the tire using the same perspective.
>unless you were going for primitive art

>>1076693
break up that long loading board and use strong hinges to acordian the setup into a large ass tailgate. Have metal extentions that are going a couple inches beyond each of the sections to give it strength and stability when under load.
Sliding that onto/off of your truck will require you do move the snowmobile on/off of it at the same time. Unfolding and refolding that tail gate will be much easier.

>>1076642
Judging from that gif the light seems to be stationary while the skull moves around.
Pedantics aside, if all you're looking for is a pulsating led, the circuitry wouldn't be that difficult. I would look into some adafruit stuff perhaps

>>1076647
You know, at this point I've considered just making the body oscillate around the light. Trying to do as little wiring as possible but if I have to then fine. I've also noticed that "oscillating" is a very poor search term for electronic components.

>>1076642

What I would try :

Get a glass eye pendant, put some EL wire or LED strip around it to make it glow, stick it on a balsa wood stick painted black (wires going to it too).

If you make the body move the glass will move slightly too. Otherwise you can have an electric motor drive the bottom end of the stick to make it oscillate.

PS. starting a bit too late for Halloween.

>>1076476
I dont understand your question.

The inside should just be a regular box with the fancy paneling on the outside.

But how is it black through the cracks? Is the inner structure just a frame with landscaping fabric attached and soil dumped into the fabric liner. It wouldn't look as nice with just a basic box with the framing on it if there wasn't the open spaces in the frame...

>>1076539
It's a box with some planks attached.

>>1076415
>Where can I find good hinges online that offer international shipping.

fuck

google

gtfo

File: Paint hinges.png (2KB, 521x213px) Image search: [Google]

2KB, 521x213px

>>1076427
... You really think I haven't tried that.
I´m hoping someone knows a place like that.
I am aware that Ebay, Amazon and almost every fucking place on this entire planet ships internationally.

And also I found hinges like these in the picture (Ignore the quality) in a store near me.
Does anyone know what they are called.

>>1076430
Those are called hinges, I can tell from the quality of the picture and having seen a lot of hinges in my day

Laser cutter if your rich,

If your poor use a luthiers bow saw and a drill.

>>1076391
>>1076393

A jeweler's saw would also work, depending on availability in your area. Brownell's has them, as does Track of the Wolf. Not sure about blades for a luthiers bow saw, but there's a good selection of them for jeweler's saws, though you'd be interested in the coarsest.

>>1076308
Yes

Huh, rare to see fpga shit on /diy/ or 4chan in general.
Uhhh. Hmm. Yeah my first step would be to check if the cyclone has enough GPIO. I haven't worked with the 2 but I know the 4 can have like at least a hundred GPIO pins.

Eagle is pretty popular.

Might want to try an evaluation board before you build a whole PCB, I think a Cyclone IV/V runs about 90 to 100 dollars at the moment.

>>1076308
>opencores.org for hard IP

Uhh breh that shit ain't hard

make a mold to pour the concrete in and mill the wood out of a tree

>>1076268
put coffee on a table

put concrete into coffee

drill a hole for the wood

use concrete to get the wood

then use the drill to make the legs

the table to make a glass

you can cover the concrete with table and the wood can be coffee

>>1076268
this >>1076270
and dont forget, that thing will be heavy