What do you call this type of post that is a half T?
I want to make a frame to hang a heavy bag from instead of attaching it to roof beams or buying prebuilt.
I was thinking of making a structure that is basically just two of these connected by a longer beam in the middle to give more room to circle the bag. Probably all of them being 6x6 posts with some 2x4s for support and then something to give it some feet and tonattack some standard sized weights to it to weight it down so i dont have to drill into the garage floor.
The idea is to have it long enough so that i can remove the bag and park a car under it if needed.
Ive seen some plans for a "cage" version of this that has 4 corners but it seems like it could be done without have to resort to that.
How can i ensure it is strong?
Enough to support a couple of hundred pounds?
I want something like this, but in my garage.
I'm getting closer. It looks like I need to build an execution pit.
Does anyone have any plans for building a gallows? I promise it's not for hanging people.
It's for a heavy bag. Yeah, that's what it's for.
>TI tools
Are they an overpriced gimmick?
>>1076744
they are not overpriced because the material itself is expensive, gimmick depends on if you really need the added strength supposedly.
>are expensive tools overbuilt for the job overpriced gimmick?
it is really a personal choice, but op i suggest you go swing a normal hammer to start with
>>1076744
Yes. In fact, most new tools are gimmicky shit. I prefer old tools. Pic related.
>>1076754
what's your trade? what do you need the spike for?
left or right?
right here
>>1076504
Right because not stupid ass plastic all the way around.
But i mainly work on automotive electronics so I only need little exposed wiring tips for installing into plugs.
Right because that's the one I've used and that's the one I'm good with and I'm not going to spend more money on another tool that does the same shit
>>1076504
Ideal Industries Stripmaster Wire Stripper,
pic related - pretty similar to your right
Any lathe stories /diy/?
Did you ever saw, suffer of were close to suffer a lathe accident?
>>1076490
yeah, twice. got PTSD from it.
>>1076490
>student workshop
>relatively new to using a lathe
>facing a part after drilling i can't remember why
>lathe makes a fucking weird noise
>panic and shut it down
>go get supervisor
because of drill holes it was intermittent cut making the funny noise, nothing to worry about
phew!
that was the closest i came to accident.
>>1076490
Not a lathe story as such, but an industrial accident nonetheless. I used to work for jaguar/land rover in the UK and I saw somebody get stamped by a machine used to press car doors out of sheet metal. He was under the stamp and dropped the control pad, it swung on its cord and hit part of the supporting structure. That bang was enough to activate the press and turn him into a puddle.
Ok so I'm not sure I'm in the good section and it may sound really basic but let's give it a shot.
I'm in a room with poor brightness, only one lamp. Must be an economic one but I can't tell because I know nothing about that. I've got no lampshade so it's pretty ugly. I'd like to fix that.
What kind of lamp should I have ? What lampshade do you recommend ? Where to find those articles ?
For the voltage I'm in EU, it's 220V I think.
Btw I do not have any knowledge about how lamps are working. I forgot what type of gaz there's in it but I'd like to know.
Thanks.
>>1078489
What type of base does it have? ie B22 E27.
Just get one of these https://www.amazon.co.uk/Philips-Edison-Screw-Light-Frosted/dp/B01HZRNFJ8 it will provide plenty of light for a dark room, I have a 75w LED equivalent in my dining room and it provides plenty of light.
>>1078494
After some research I'll say it's a E27, I'm not sure how to check that without measuring it though.
Yours look good, thx. Any advice for a lampshade ?
>>1078489
unscrew your lightbulb and take a picture
So, i have one of those 50cc 2-stroke bicycle motors. It has magneto and that's what gives coil energy to generate spark. Do you guys think there is enough energy to spare some of it on transformer+voltage regulator for simple tasks like LED lights or maybe even something heavier like USB charging? Is magneto energy even consistent enough to not overheat voltage regulator on entire RPM range?
What you want is a second charging coil and a battery. These are common on ride on mowers etc. One problem they have is they deliver power in pulses as the magnet passes so you will need something to smooth this out like a battery.
>>1078349
So, connecting to existing magneto (which generates spark power) is bad idea?
I don't know how large those pulses are, but i'm willing to bet that proper capacitor (and couple of zener diodes, basically simplest AC/DC power supply scheme) would be enough.
>>1078352
No, it won't work. Take the pants off your head and quit being stupid.
Can someone explain me how to make stronger concrete than the average water, sand, cement mix?
rebar, fibermesh, and wire mesh.
You can use all three.
>>1078300
http://www.pavingexpert.com/reinfrc1.htm
>>1078300
https://www.youtube.com/watch?v=bRtRzszRcmU
Hey /diy/.
Trying to set up an old micrometer to do some measurements for school project. I'm using an RS232C to USB connector. (not actually measuring the diameter of a lighter, only used for example)
Only problem is that we need to export the data onto an electronic interface. Figured I could use my raspberry pi using installed Telnet to bounce the echo signal function on the ZMike device.
>>1078040
> export the data onto an electronic interface
What do you mean by that? You can already got the data on your PC from the RS232->USB adapter. Why would you add the extra step of putting it on Telnet through a Raspberry Pi?
>>1078062
i haven't figured out a way to get the measurements onto the PC. the machine works, and i know it's capable of putting out data, i'm just not sure how to handshake the device.
>>1078144
short the pins on the 3.5mm jack marked 'data send' and it squirts out the displayed reading to the serial port.
About how much would it cost to take the layout of a double wide trailer and build a home with standard house building materials?
I own 0.8 acres of land in the city suburb. Was going to buy a Clayton double wide for $68K to put on it but the city doesn't allow manufactured homes.
What are my options now? I don't have much money and buying a log cabin kit would look funny in a city suburb. Is there anything I can do with the land to make extra money to save to build a real house? I only have ~$110K.
Live in a van faggot
Not really. Log cabin kits usually cost about 3x what the price is to put together so that wouldn't work.
I'd live in a van or make a tiny home on a trailer so the city couldn't bitch.
>>1077821
Where I live $110k would build you a nice 2-3 bedroom home with a garage if you already own the land. If, for some reason, that is not enough just build a 'mother in law' unit and garage first.
I've seen some very nice 2 car garages with a one bedroom on top. Or, if you have the space, you can do a garage with the unit on the side. Either way, you can live there until you save up more money to build 'the house' and then rent out the other unit.
Anybody here have experience Waterproofing a basement? I'm renovating a 60 year old house with a cinder block foundation. On a slope, the uphill side seeps water into the basement through the mortar during torrential rains.
I called a basement waterproofer, who came and checked it out. Gave me a list of things to try before he dug up the outside of the foundation.
Since then I have
>Put covers on basement window wells
>Cleared downspout drainage
>Sealed driveway expansion joints
(Concrete slab driveway on the uphill side of the house)
>Dug up foundation gardens, ran plastic underneath at an angle, and mounded the dirt.
Doing all of this has reduced the amount of water coming in. A few weekends ago we got a drenching rain. What would have been a noticible dribble coming from about 2' above the slab is now coming from near the floor, and is just enough to moisten the wall. Pic related.
I threw my hands up and called the guy back, expecting him to suggest digging and sealing the outside. He gave a few tips for the garden, but said we should try an interior wall sealer. Reading reviews on Amazon for products, I can't find any reviews that have updates on durability over time. I want to put a framed wall in front of the blocks to hide piping, and cabinets in front of that. I'd like to avoid water damage, and reopening it year to resist. Any suggestions?
>Tl;dr very small weeping of water in basement, any suggestions of products to seal it up?
>>1077815
This is the product I'm thinking of using, a cement parge that is apparently good to 200psi. I'd buy enough to apply to the whole of the uphill interior foundation, in case the water wants to seep in elsewhere.
Signs of long term water seepage. Not to be a downer but anything you do inside will be a waste of time especially if you want to build a framed wall.
May be ok for a year or so but then the you can have a nice mold sandwich with your 9" VCT tile.
If you plan on living there for a while invest in good exterior waterproofing and good basement ventilation.
Hey /diy/nosaurs. I saw a few infinity mirrors that looked pretty cool and wanted to try a starter project with a small table. I'm pretty happy with the results and I'll post a few pics here and try to get a gif.
Ask any questions and I'll try to answer them best as possible.
What are the basics behind this project? Its an interesting concept. I currently work at a glass shop so I have access to all kinds of mirror/glass/plexi/ lexan. I also have a working knowledge on electronics and carpentry so I don't think thus would be real difficult for me to build. I currently have a 42" Samsung plasma TV taken apart and being used as a table top. I could just use the frame from the TV and install my own glass and leds into it
So for the last 3 years, there has been a piece of wire dangling from the hallway ceiling. I can't even remember why, there used to be a working light there, but when the bathroom was renovated in 2013, it suddenly ended up as a dangling wire with no light on the end.
So today I ask my uncle to come around who is an electrician to fit the light pendant in and when he strips the wire hanging from the ceiling he says it is only contains live and earth, with no neutral. He said there might be another neutral wire under the floorboards next to it that isn't being fed down the small hole in the ceiling, however I took a floorboard up and there was no other neutral wire, just that one. What on earth am I meant to do?
Also pic related, my bathroom in it's current state.
>>1077223
neutral is your earth. maybe he means that it contains no dedicated earth? aka, a backup neutral
>>1077223
Find junction box, use existing wires to pull new complete set of wires.
With GFI it's easy enough to check whether the wire is neutral or earth, just light a bulb with it. If the GFI trips it was really earth.
If the GFI doesn't trip and the light works then one option is to simply ignore it and install the lamp armature without earth (if it's plastic then earthing adds bugger all).
I got this halloween costume party but no money, so I made this mask from plastered bandage and white tint, then stitched and hot glued the preassure button for the elastic.
I just dont know what can i do to make it a proper halloween mask, what do you think I culd add?
Couldnt you add fabric to the top and make it more of a hood?
Also print out a design on paper and try to transfer a stencil of the design on mask and then paint it.
Maybe chop up some yellow lense safety glasses and adapt them to the eye holes?
Look to Lucha Libre masks for inspiration
Im high as fuck but those are my thoughts
Look up an old czw wrestler named joker. Copy his face paint with sharpies. It's exactly what I did one year.
I kinda want a more scary thing, you know? but I cant think of something ):
how bad is it that moss grows on my shingles?
if really bad, what's the most cost effective way to permanently remedy it?
must be too much shade. you're gonna have to top or fell some trees. if neighboring houses/buildings are the cause of the excessive shade you're gonna have to burn them down, there's no other way
>>1076449
huge shade tree is the why.
but does moss cause much damage?
>>1076450
moss traps moisture but if it is properly lined with waterproofing and with proper ventilated spacing then it should be fine
otherwise it will rust nails and rot timber etc
Hey /diy/.
What are the most common reasons that cause electronics to malfunction?
And what are the easiest ways to repair these electronics malfunctions?
Could your question be anymore broad?
>>1075576
Dfm
Reason 1: Tin whiskers
https://en.wikipedia.org/wiki/Whisker_(metallurgy)#Toyota_accelerator_position_sensors_false_positive
https://nepp.nasa.gov/WHISKER/background/
Repair: Smack affected device.
Reason 2: Bad or old, dried out Caps
https://en.wikipedia.org/wiki/Capacitor_plague
Repair: Replace them with new ones.