Kernel Time Machine edition
/hbg/ Wiki: http://homebrew-general.wikia.com
3DS: 9.2 (10.3 for userland / downgrade, eShop is x.x.x-28 only)
Wii U: 5.5 (Upcoming IOSU exploit)
Vita: 3.51 (Userland)
PS4: 1.76 (Webkit)
N3DS emuNAND can't be updated past 9.5
O3DS emuNAND can update all the way to 10.3
3DS: http://pastebin.com/TQwDsWh9 http://pastebin.com/WVszD3Tm http://i.imgur.com/tH9FMpc.png
n3DS eShop Access: http://pastebin.com/vWEFatcb
-NOTICE: January 11th http://www.nintendolife.com/news/2016/01/extended_nintendo_network_maintenance_on_the_way
-Menu/Iron/Browserhax all work on the latest firmware again! DON'T DELAY in getting Homebrew.
-memchunkhax2 is a kernel11 exploit that allows downgrading to 9.2, and works on every firmware including 10.3.
-mch2 readiness test: https://gbatemp.net/entry/10938/ If you get DEADCAFE, you're eligible to downgrade.
>Is downgrading safe?
Things are going pretty well. Some bricks are simply people using the wrong firmware. Be sure you understand the risks.
-julian20 and TuxSH both have mch2 sysUpdater in its beta stages (listed in the 3DS Pastebin)
-New 3DS seems to struggle in even passing step 7, though eventually does work.
-Blank screen can be caused by Menuhax. Try pulling your SD card if you get it. Boot, reinsert, change theme.
-Apparently, the Wii U and 3DS use the same fucking keys... LOL
-Hykem is being weird.
-Linux running on PS4
-Cobra Black Fin was announced. http://wololo.net/2015/12/07/cobra-black-fin-an-upcoming-dongle-to-play-ps-vita-isos/
-A Vita update got released, you might not want to update since it fixes the email exploit.
Going to keep asking why my games disappeared on Emunand and Systemnand after formatting emunand until I get an answer. How do I get them to appear? I put them back in my SD from backup multiple times.
Reposting in this thread.
Trying to run sysUpdater, getting an error.
Failed to get CIA file info.
I emptied the contents of 9.2.0-20U(Full)_n3DS.zip into the root of my SD card as well.
I'm on a N3DS, latest version. Anyone have any ideas?
My 3ds is on version 8 or something and I want to hack it.
But I am so fucking lazy holy shit what is wrong with me. It's not even like it's hard to hack but this just feels TLDR.
I hate myself.
Who else installed way too many games and now doesn't know what to play first?
>tfw when keeping your purchased games along side pirated ones
Best feeling tbqh
READ THE FUCKING PASTEBIN AND GUIDES BEFORE ASKING QUESTIONS AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH.
I'd asked earlier and no one had anything. I'm at my wit's end here, would going back into the gateway launcher and reformating emunand make it usable again? I'm just scared incase it creates another partition on the SD
Got it working. N3DS 10.3 to 9.2
Used https://gbatemp.net/threads/407888/page-91#post-5923549 through themehax.
Ran FTBrony before sysUpdater, not plugged into power supply, no game card inserted.
Alright my fellow comrades, I've successfully downgraded to Version 9.2.0-20U. How may I achieve the power to be able to pirate video games?
I have read thy pastebin but am looking more forward into a much easier method such a YouTube internet video my lads.
BEFORE I GET INTO CFW, IS IT POSSIBLE TO BRICK MY SYSTEM WITH ANY CFW!?
AND IS THIS GUIDE GOOD? http://i.imgur.com/tH9FMpc.png
I LOVE YOU ALL
Nothing new that hasn't been around for a bit now. You can downgrade to 9.2 on any current firmware, and can thus set up CFW and pirate games on any firmware. But no, nothing new.
>wanting an easy way to pirate
Lol no, it took 5 hours of setting up everything correctly and being paranoid enough to penta-check everything in order to not fuck up for me to install cfw
>use CHMM2 through homebrew instead of the .cia version
Through hblauncher loader? I'm a bit confused. I'm running CtrBootManager, and I first tried to install a theme by going to the homebrew launcher instead of rxTools when I turn the 3DS on, but it installed to sysNAND and I had to reinstall menuhax. How do I get it to install to emuNAND instead?
Anyone got a link to the newest Rhythm Heaven .cia? Pretty please?
>updated emuNANDS to RX-E 10.3.0
>Everytime I go into eshop, error 022-2634
I thought I was able to access the eshop if I updated, wat
you are already at 9.2, right? if you are i really don't know the problem, its something that can't happen, you can't get a "update the browser" nag in 9.2, but even if its really true....you...umm...could try downgrading further (o3DS only) for mset
So update -> browserhax -> downgrade again -> try again?
And is 9.2 what I want for a n3ds or should I use 9.0?
Can't I do it with menuhax or browserhax? I'm a bit low on space so I'd really rather not have to download IronFall if possible.
I'll try that and let you know how it goes.
Followed this exactly and worked first try thanks anon
>60% left on MHX inject
I wonder how the japanese will feel when suddenly all these gaijin are showing up in their lobbies
>AN ERROR HAS OCCURED PLEASE RESTART
>"Wow what a stank shithole. I doubt there are many people here"
>507 people viewing the CIA downloads
if you have an android phone you can try using 3ds x-loader
or this too
open browser with wifi off
add bookmark of exploit launcher
turn off console
turn on console
go as quickly as you can into the browser and tap that bookmark
Alright, after some real bullshit regarding my internet dropping out and SD card corrupting files I finally got it.
What stuff do I do now? Also if anyone needs help with downgrading their N3DSXL I might be able to help
N3DS with 9.5U emunand and rxTools 3.0
I can't install Stella Glow, it gives me this error screen on Title Manager, it won't install with DevMenu and FBI too
already installed a bunch of cia without any problems
FUCKING WORKED, thanks a bunch, anon. I'm a bit curious, though; where did you get that CIA from? Seems a bit strange that the one I got straight from the developer's site didn't work.
Grab a .3ds file of Triforce Heroes, use the simple 3ds to cia converter, make sure to click the "FW SPOOF" box when you convert it.
This link has the latest update for the game spoofed/cryptofixed so get that and install it after the game and you should be good, im on a 9.1 N3DS and I can play online.
Why don't you have auto boot?
COMBINE THEM CUNT
DON'T FORGET TO EDIT THAT CFG AND THE MENU HAX TRIGGERS
Have you unlinked your nands and updated emuNAND? If so , yes. Pro tip - use socket punch x fbi to make life easier.
Is it possible to get unlimited plays on the badge game?
Nope I thought it was too, but it turned out to be the whole game with the update already done
Whenever I try to use sysUpdater I get this screen and it freezes. I don't even get the numbers or whatever.
Did I do something wrong? I'm using browserhax if that helps.
My SD card is dogshit small but i'm doing the whole downgrading shit anyways
When I buy a bigger one, assuming everything's already set, can i just copy exactly the contents of my old one to the new one and expect it to work?
> TFW I like the thrill of NEVER EVER paying jewtendo another cent for their imcomplete games
> Got money and time to get seriously down and downgrade
>Realize the hard part is after downgrading every1s having fuckton issues trying to get games or even run things without rebooting if it doesnt work at first
I mean I guess theres a price to being able to pirate shit on the n3DS but holy fuck the psp wasnt as time consumimg and I fear I might spent more time trying to launch shit and downloading games for my CFW N3DS than actually playing it
Apparently I forgot the link to the update, sorry,
Does this guide include how to set up rxtools for auto boot and backing up the NAND?
1. get emuNANDtool
2. extract emuNAND from SD using the tool, it gives you a NAND.bin file
3. inject that NAND.bin file into your new SD card using the tool
4. transfer all the contents from the old SD to the new one
I added a little incentive to the wiki page to hopefully get people to read everything in the OP.
It's not my fault if he has done dumb stuff, but if you suggest to do something that would prevent you from doing dumb stuff instead of understanding what you actually do you're doing something dumb too
alright lads, i'm trying to install some gba cias but whenever i try to install them on sysnand i get an invalid signature error. (emunand works fine) what do
im booting fbi from homebrew menu btw
skip to setting up cfw bit and download the nightly build + edit the crt boot cfg and you're golden
POST THIS FUCKING LINK EVERYWHERE BEFORE WE TURN INTO EDGY GBA TEMP
Okay, so I backed up my saves before I installed Emunand and all the downgrading.
>SVDT can't target the fucking games in Emunand.
>1,000 hour+ saves gone, even though I backed them up.
is there ANYTHING I can do?
Has anyone got the DLC for Taiko no Tatsujin: Don to Katsu no Jikuu Daibouken to work?
I installed the update and then the dlc but they still aren't showing up, and you dont need to unlock.
is it normal for my console (n3ds) to fail to boot when the SD card is in after downgrading?
if i put it in after it has booted to the home menu ironfall gets stuck at the 3ds splash screen
do i have to format it or what?
rxTools Nightly (Older nightlies reccomended for safety purposes, don't use the alpha nor the stable); Mirror
If you have blackscreening issues on boot, try this version of rxTools instead.
END YOUR LIFE BECAUSE YOU CLEARLY CAN'T READ YOU SPASTIC CUNT
>followed rxtools autoboot guide
>dont have access to rxtools menu anymore
If I reformat my mini-SD does the emuNAND still stay on my 3DS? I ran to some issues and wanted to start everything over again but reinstalling emuNAND would result in 3 folders instead of 2 folders and launching a clean slate with 1 folder would automatically form a 2nd folder in my Nintendo 3DS folder so I'm pretty confused right now.
I think I made some progress, this time it went to gateways website, but it didn't make any progress other than just saying it was loading the tools.
I waited a good while, then decided to reboot.
I think it's coming down to rng.
Guess I'll keep trying.
When I create my Emunand will it have all the games and saves and shit currently stored on my Sysnand?
I really don't want to have to redownload all the shit I've bought legally or back up the saves individually. Hell, since N3DS can only get to 9.5 on emunand can I even access the eShop with it?
Just re-checked on the RX-Tool selected homebrew channel.
No games, and I've got like 6 to try and restore to status quo.
Do I have to put SVDT into RX-Tools launch list?
so now that I have emunand installed
how do I launch rxtools from the beggening and have the fbi installer?
>POST THIS LINK TO GBATEMP BEFORE WE BECOME GBATEMP
I really don't want to have to start all over
Heres hoping I get the rxtool autoboot to work
Hopefully my last question for a good long while.
>6)once menuhax 2.1 is installed go to configurations and set it to autoboot. it will ask you to set a button to launch menuhax. tapping the touch screen is the autoboot option
The hell does that mean? I thought Type 2 was the autoboot option, since it doesn't require any button press.
>get red text twice in almost an hour
>freezes both times
no, emunand exists entirely on your SD card
back it up with
then reformat the card. open ^ again and format new nand, inject emunand.bin you just dumped and you should be good to go
Monster Hunter 4 Ultimate and Smash are currently installed and updated.
However, I go into SVDT and it targets only the proprietary software. Does this mean I have to install hax in the sysnand to peek into the emunand list?
It's as if the games aren't even there. Shoulda kept the shit linked. Convoluted crap
How do I update games in emuNAND? Can I just pick the default nintendo update option?
Googlw holy fucking shit like you faggots act like google does not fucking exist when you ask simple shit
When I installed the specific builld of rxtools in the guide, the system just went into rxtools emunand and didnt show me the menu.
Now it does the same thing every time I load rxtools. It just skips the menu. I've tried holding R but that doesn't work.
One thing that was kinda odd, was that when I installed this rxtools build, it kicked me to emunand (which I had just formatted to unlink nands) and I had to set up the date, time, etc. But after I finished that and got to the home menu, I checked my firmware and it was just 10.3 with no RX3D in front of it.
When I saw this I removed the rxtools folder from my sd card and then put back a fresh one from the zip, and it reinstalled next time I booted rxtools, still skipping the menu and for every boot afterwards.
Format Emunand. SYS and Emu are both on the same nand, just separated. Formatting Emunand with something like TinyFormat.cia or system settings unlinks them.
http://i.imgur.com/tH9FMpc.png has more info
There's a thought. However, I don't exactly know where on the Nintendo 3DS spot I'd put the backups
Bonus points for if it's hidden in that shitty emunand partition that's inaccessible
I just copy-pasted the retard guide but I can see where you might get confused. I edited it to just say do type 2.
nigga you fucked up somewhere bad, don't blame the guide.
holy fucking shit fuck this pendejo
use browserhax to set up menuhax and ironhax, then use either menu or ironhax to run blargSNES through the HBL menu
HBL version can't go into sleep mode without crashing, though: you're better off downgrading and getting CFW so you can install the .cia version
Odd, I couldve sworn it was the whole game but maybe im stupid, try getting the game first in .3ds and using the simple 3ds to cia converter to fw spoof it, then use that update.
Could be I just forgot I already had the game installed when i downloaded that update. woops
>setup rxTool autoboot
>sliderhax wont work at all, cant install menuhax
For the third time as of right now. It's this cia, if it does any help.
Tried it with 3.4.1's launcher, same thing.
I managed to get an o3ds to do this shit 2-3 days ago on the first try on all the steps, no problems.
This is confusing as hell.
Can someone answer the following:
Googling 3DS roms seems shady as fuck and probably results in virus's. Is there a safe place like emuparadise to find shit?
Would playing virtual console games mess up the hack?
Can you put DS games on the 3DS?
Does your NNID still work afterwards or will you need to stay offline?
All wondering if it's worth it to grab a 2ds to do this.
Just downgraded to 9.2 on an o3DSXL, Just a few questions before I get started on custom firmware.
I noticed there's a guide for n3ds on how to set up Rxtools to "Coldboot" can I do this on an original 3ds? I wont have access to the internet very often.
Whats the biggest thing that can go wrong from here on? I'm pretty confident everything will be fine but I'd like to avoid any huge mistakes if possible.
Thankyou /hbg/ I know you must be sick of this shit by now.
I fit all the prerequisites:
I formatted emunand with the gateway menu, installed 2.7 rxtools to unlink nands with tinyformat by formatting emunand, and I removed the 2.7rxtools folder.
Then I put the guide's buoild of rxtools on my SD along with the starter kit.
I installed rxtools and it kicked me to emunand.
Set up emunand.
Didnt see RX3D in the sys settings so I reinstalled rxtools.
Used the browser to get to the homebrew launcher to get menuhax.
Set up ctr bootmanager as outlined in the guide.
And now Everything works except I can't access the rxtools menu upon booting it up.
FBI is still injected in emunand from when I did it in 2.7 to get tinyformat, so I can install .cias. I'd like to be able to access the menu, though.
Is sliderhax working for someone? I did everything the paste bin said and I am at this step, but browserhax doesn't open.
To the anon in the previous thread with the 1.0 3DS from their friend: I actually saw someone post on GBAtemp about dumping 1.0 using cubic ninja. If you do not have cubic ninja, i am willing to mail you (yes seriously) my own copy and a game with the 4.5 update so you can hack the 3ds if 10.4 comes out before that
I don't think there's a public 1.0 dump and it would be really cool if we had one. Just provide an email so we can get in touch (if you don't have CN right now, anyway) post it along with another pic of the 1.0 so i know this is the same anon
It's annoying as fuck but understandable if he's paying for the hosting.
But that fucking kike is trying to make NEETbux off storing PIRATED games on MEGA. grrrrrr
use that instead. you're welcome anon
>I formatted emunand with the gateway menu, installed 2.7 rxtools to unlink nands with tinyformat by formatting emunand, and I removed the 2.7rxtools folder.
>Then I put the guide's buoild of rxtools on my SD along with the starter kit.
Just from reading this I can tell you either didn't put all the steps you did or you skipped shit and my guess is that you skipped shit.
Oh you meant through the RX System settings menu?
Because I lack that, at the moment.
1.turn off wifi
2. use the camera to scan the QR code
3. exit out of the internet when it says you dont have wifi on
4. turn wifi back on
5. click on the browser button so it boots directly into the sliderhax and then tap the right corner like usual
You should make this post more noticeable, this thread is really fast, he's not going to notice you.
I hope this catches his attention, if he's still here obviously.
I don't think I skipped anything. I'll explain the part you quoted again in greater detail.
I started out with a clear sd card and just put the files needed for gw menu and 2.7 rxtools.
When I got 2.7 installed via the browser, I could access the rxtools menu and replaced health and safety with FBI in emunand. From there I had to update emunand to go to the eshop to use FBI to install tinyformat. Then I used tinyformat and it formatted emunand. After that I, like I previously said, removed the 2.7 rxtools folder and replaced it with the guide's.
Where do you think I went wrong?
I don't need to watch my ratio
And that's just black cats which I barely use. I think i'm like 60tb up on ipt with 5tb downloaded.
So lil buddy , how does it feel knowing that you could actually dl faster than 1mb/s max if you weren't such a babby?
>Softbricking every time with every sysUpdater, even with ftp tricks and whatnot
>Probably done it about 30 times now
Fuck my life
For one your mention of using tinyformat and updating emunand so early already makes me know you're not following the guide. Literally just follow the fucking guide, this is all I'm going to tell you.
Question, I backed up my sysNAND before downgrading, but some things went awry and I ended up formatting multiple times and now the number/letter jumble inside the Nintendo 3DS folder doesn't match either of the ones I have right now. Can I paste what I have backed up into what's on my SD card right now and get all my stuff back?
So fucking tired and confused at this point...
>Downgraded to 9.0
>Try out every guide that ever came out in the past few days to get CFW
My main problems right now:
1. I only have Ironhax, but more entrypoints sounds good, so trying to put on menuhax. But Ironhax loads forever. I don't know how or why Ironhax isn't loading anymore. Onto browserhax I suppose
2. I've tried so many different guides on getting rxtools on here and now I have a shitton of different files that I don't think are working together and I don't know how to begin again with a clean slate.
3. I've gone to the gateway launcher site and formatted emunand, but I still don't know what emunand is or what a nand is or how to back it up. Nothing ever changes or adds anything on my card.
Shit is confusing and I'm the only one trying this out of all my friends, so I'm pretty frustrated right now.
You can use it if you want but NTR is just way more simple and I regret not using that in the first place.
the rxtool method requires you to do weird work arounds (which might be where I fucked up), changing your emunand language, and loading a different secure_info.
I was able to do it and it played for me but I couldn't play other shit like MonHunX or smash.
NTR is just installation then launch NTR then launch game.
Can't find it.
That, and SVDT saved as some fucking retarded system/user1 files that are 80kb a piece.
I DON'T THINK I GOT MY SAVES ANYWAY.
Oh well...goes to show. Shouldn't have wasted time..
I bought one of these a while back for the front-facing USB 3.0 ports: http://www.amazon.com/Rosewill-Multi-In-1-Internal-Connector-RDCR-11004/dp/B007YDJJFS
The fact that it came with an SD card reader was just a neat bonus.
The guide prereqs say to have unlinked nands.
You can't unlink nands without tinyformat.
You can't have tinyformat without visiting the eshop first.
You can't visit the eshop unless you update.
Updating and using tinyformat were both part of fulfilling the prerequisites. If there is an alternate way to unlink nands that doesn't require either of those, tell me what it is.
Does tinyformat unlink nands or not?
im on 9.6 and browserhax isnt working, everythings extracted on my SD but when i go to the site on my ds it just hangs. tried waiting and clearing history and cookies and restarting like 3 times. should i just update to 10.3? old2ds btw. please and thank you anons
I found one on a site with overnight Australian shipping and it's fucking sold out
why do I live here
>You can't unlink nands without tinyformat.
You didn't follow the guide
You didn't even look at the fucking video in the guide
Why do you blame the guide when you don't follow the fucking guide? I'm done anon.
If you got rx tools its real simple.
1. Use simple 3ds to cia converter to create a ncch (or whatever) bin. by putting your .3ds file into the "roms" folder
2. take that .bin and put it on the root of your sd card
3. when turning on your 3DS you want to get into the rx tools menu, depending on how you set it up it could be holding down the L button when you start the 3ds. Or the R button or whatever button you might of made it yourself.
4. Once in the menu go to the decryption options and click "generate xorpads"
5. it will give you an error, but thats what you want.
6. take sd card out, put in computer, take xorpads from root and put in xorpads folder in the 3ds converter folder
7. open the converter, click the convert button, itll pop up to say "finished" at some point
theres no progress bar but it is working.
if it needs to be FW Spoofed you just click the little box before converting it
>I'm the only one trying this out of all my friends, so I'm pretty frustrated right now
I'm in the same boat, I'm so close to giving up.
But I'm looking for you tube vids to help me out first
>tfw most of the dumb problems have been sorted out and now only problematic hard to fix/tell what's wrong ones remain
I had to choose a basic colour theme to get it to work. I was stuck on this shit for an hour, fucking browserhax.
>tfw just sorted out rxtools autoboot
>tfw feels fucking good
>tfw it really is magical
Can't fucking thank these patient anons enough desu. I am guessing I can install games and shit now, right? Fuck that, I want those Japanese 3DS themes.
Alright, First, before trying anything, You need to understand what the fuck are you doing. So go and google what is an EmuNAND, and What's a Sysnand, Once you get that, move on.
You want to create a emuNAND, and for that you need the gateway ultra. there's a guide on OP, so check that out.
Once you got the emuNAND set up, you need to install rxTools, this is a Custom Firmware. Again, refer to the guide for more.
Once you got emuNand and rxTools, you need to unlink the nands.
From here, its pretty straight foward.
Relax, breath, and I suggest making a clean install of everything. I was like you like 10 min ago, now its all ogre.
2. Use rxtools 2.6. JUST FOLLOW THE FUKING IMG GUIDE. IT WORKS.
3. nand is operating system. Think of it was windows for 3ds. emunand is like a second OS for your 3ds, so you can essentially dual boot. When you create an emunand, its like making a partition on your SD card to install OS.
How to create/back up emunand: ITS IN THE IMG GUIDE IN OP!
>there are people here who are not using the Persona 5 custom theme
What's your excuse?
Bump. And yes, I have everything in the updates folder.
>What's your excuse?
I'm using a better theme
>Get r x tooIs ver 2 6 to work
>Go to Iaunch emu nand
>AIways goes back to home screen
>Try to Iet it auto boot
>Goes back to ohme screen automaticaIIy
>HoIding L does nothing
>Can press R whiIe it auto boots to get into menu
>First option is Iaunch emu nand
>Goes back to home screen
>Get that sIot bin for ver 6 and under (even though on ver 7, trying it just to see)
>StiII goes back to home screen
Did the Python 2 7, got aII the fIes in root, it finds them when Iooking. What's the issue with this?
Even went from 2 5 2 to r x tooIs ver 2 6 after re formatting the card.
Kek, I actually have that in my theme folder as well. Good taste fampai
If there was a Rosa theme I'd use it.
Nope. (imo) There are a couple on 3dsthem.es
Anyone mine helping me with downgrading mset? I can't figure out how to do it.
Not that anon, but here you go
That image guide is burned into my eyes but things are still going wrong. I tried going to the gateway launcher and I formatted emuNand at the step it told me to, but then said to back up the nand.bin file, but when I went to see the SD card there was only Launcher.dat. There was never a nand.bin before on my backed up files and not after it was formatted (not that I expected it to be, but) so I don't know where it was supposed to come from.
Now my current problem seems to be, a lot of places are telling me to upgrade to 10.3 in order to get menu/browserhax on there because I don't have them, only Ironhax which apprently isn't working in 9.0. Do I have to go back up to 10.3 and then back down (this time to 9.2)? I have to risk a chance at bricking again, don't I?
>bitgamer has a collection of 1000+ 3DS games
>they're all in .3ds format
Hey guys, could I get some help?
So, basically, to my limited knowledge, pic related means somehow that I have to install the CIA from SysNAND using FBI, instead of EmuNAND.
So, what I'm doing is:
>Turning on my N3DSXL
>Selecting HBMenu on the Ctr Boot Menu
>Selecting Pasta CFW and let it reboot
>Now, select rxTools option on Ctr Boot Menu and pressing and holding R to avoid the red screen freeze
>Wait until the system boots into SysNAND and proceed to scan the QR code
>System reboots, again, so I wait and select HBMenu from the options of Ctr Boot Menu.
After that, it's where I'm stuck, if I select FBI and try to install FBI.cia, I get a different error, after that, it reboots the system and if I select the rxTools option, even if I'm holding R, it goes directly to the red screen freeze.
Any idea on how to fix this? What am I doing wrong?
I've already downgraded and setup cold boot straight to RX-E, but some CIA files I install through FBI will load the "Nintendo 3DS" screen with the wavy background and just hangs, never actually loading the game. Is this a region locking issue or something else I'm missing?
Considering the lack of discussion of anything else other than 3ds that's been going on forever really.
Please make a /3dshg/ thread so that people who want to discuss anything other than 3ds get a chance to.
I know it's not the first time, that's why you really should make your own contaiment thread.
I remember a slight majority posting about 3ds in the past but not seeing thread after thread, with +800 posts ONLY about 3ds users circlejerking.
Literally, there's like 2 posts in this thread that aren't about 3ds.
Black cats has like every game converted to cia
............. in bulk packs that don't have game lists so you have to download like 10 of them before you find the game you want
Partial leech but still , so much effort
I tried that anon. I can't get it to work
>Setup rxtools to autoboot
>go to install menuhax with sliderhax
>does the yellow screen thing as normal
>goes to my camera app and freezes
No. When a new exploit for wii u gets released you complain about this too and say make a /wiiuhg/.same for any other console if an exploit gets released. This is only happening because something major got released. It isnt alwsys like this. Give it a couple of weeks to slow down. Most importantly kill yourself
If you're installing one of the limited list ones on non-hacked system, I'd assume you need an official one. If you're just flat out installing them to emunand or some shit you can convert them no problem.
I have a N3DS on the downgrade friendly firmware (10.3) and an updated Ironfall. I read somewhere that downgrading the N3DS is a bit iffy right now. As long as I don't update anything, will I be good to downgrade later down the line once shit is stable, or should I hop on this shit now?
This has been happening all day. It's not the .cia either. Please help
Does your SD card have to be formatted to exfat for homebrew?