I don't have an edition Edition
Old thread : >>28458565
Slim rail tomorrow, Magnifier monday. it'll be a long weekend it seems
do you keep all your shit in your bedroom? seems like it's always a mess in mine
In for sidearm.
Also, what brand key mod rail sections do you guys buy? I can get UTG sections for $12 on amazon.
Also Hk confirmed for best sidearm by trips. I hereby dub this Sidearm edition
>tfw found out one of my professors hog hunts and has lots of property
>he has NVGs and is willing to take me out soon
>tfw this thing is finally going to shoot piggies
Doesn't that image rotation shit get on your nerves?
>Hk confirmed for best sidearm
sig fags should literally just kill themselves
It does. I'm too lazy to fix it however. I usually try to screenshot my pictures and it fixes it. Also the optic is a primary arms 1-6 and not a Vortex Strike Eagle.
Hopefully this one isn't rotated.
Wasn't after the post
It looks stupid if I screencap it
I have a "office" room for my camo/gear/guns
but yeah its pretty cramped and kinda messy at times
ACTUKALLY you should know sigfag and hkfag are buddies.
Quite portion of 1911fag and hkfag too.
-wheelgunfag & hkfag
It's a prerequisite if you're going to post on /arg/. <3
Gayposter requiesting confirmation of transmission of gaypost
Now now, don't be a sore loser.
I am letting you two fight it out m8
>if trips this is geckos n shit edition
No. You don't get to role. Your autism derails threads and it's retarded.
Your opinion will matter when you spaz down a bit
>GC confirmed for bitching out
Greencarpets is an eternal faggot with worst AR edition.
B-but it's not up to me
I thought we were friends
Is that a troll AR?
I like my rifle, besides the handguard and stock.
Gayposter requesting recognition from CGposter
I'd say you're both about on par.
No. Was my AR before I knew about them. I'm building another and won't make the same mistakes
Well then roll trips. Or you can decide the next edition.
C-can we still be friends?
What? Say again? I cant seem to hear you?
I think you've forever lost your threadmaking privs, dipshit.
Do you want me to make you feel good?
(It's not a boy, It's not a boy, It's not a boy, It's not a boy, It's not a boy)
You have cool animals, so OK.
Again? Too bad I'm not cute.
You're a ginger?
i was gonna do a tactical as fuck edition but i wanted to wait until the old thread hit 310, you know, because i'm not a faggot that starts new threads at 305.
Got my failzero/nickel boron coated BCGs in today, a day early, and went out to test fire before and after work. Both worked. And they are a $60 more expensive per BCG than the nitrided BCGs I originally ordered. Free. Simply because Alpha Shooting Sports didnt have replacements in stock and offered me an upgrade.
Very happy now, although time will tell if they are quality and hold up to actual use.
Took two videos, both are shit but one isnt even usable. Might attempt to make webM of them later if I feel up for figuring that out.
Don't be jelly. You just gotta jump the gun faster then me m80
Troll ARs? Nay.
If calling my butt a pussy makes you feel better, then yes ~
I don't have freckles though. Also not gay. :^)
>Shoulda went with the goats you faggot
>You don't get to role.
Wew thats bad english from ya!
Jeeze you out of anybody telling me anything wew! 10/10 should reevaluate yourself.
> accusing me of thread derailment
ACTUKALLY the fault lays on those who absolutely have to voice their hatred toward me and cant resist trying to press my buttons.
Except those weebshit thread and another degenerates trash which rightfully deserve my thread derailment work.
> implying my opinion doesn't always matters to majority.
Most of time it isn't opinion its facts and knowledge.
There's different vfam!
I also have certainty that ginchposter will see this faggotory boy crossdressing degenerates and rightfully commence ginchposting.
shut the fuck up you weeb faggot
we know you're just upset that you're not cute.
i was ever cute?
If you don't know by now you should just git.
Goats are -always- the answer, and we suffer the consequences when we don't listen.
something not faggot
LOOOL. Nigga, if making a tough face at an indoor shooting range is your shining example of determination, then you need to just unfuck your suburban shit bruh
Check that left hand anon. She actually was disappointed I hadn't posted pics of us shooting before.
Preach GOATbro, preach.
>When thou hast neglected the GOAT, thy thread shalt be made of faggots
Wow, you don't get the joke on so many levels.
Doesn't matter what you fags say. it isnt like i remotely care what faggots think.
Also your opinions is below insignificant due to yall faggot only have seen my face from side at best.
And because what ex and another girls said in highschool n uni. My self esteem is like bullet proof ever since toddler thanks to my mom constant attention and complimenting as i grow up. Not to mention compliments i received from my peers and another adults.
Shh shh be quiet and continue your faggotory sex activities and hopefully accidentally life!
> think my post which made up entirely of insult and correcting you made your incorrect and nonexistent point a point
>inb4 you are currently derailing
It doesn't qualify as derailment yet m8. Regardless this thread deserves derailment due to trip awarded faggotory.
So, questions here.
>What is the midline of quality and cost?
For instance, I'm not rolling in dough, so is a DD rail really worth killing this months gun budget? Or is there a functional equivalent that just won't get me Gucci points?
Same question for upper receiver and barrel (thinking welded 14.5). I just want a 'solid' build.
Guys, /ARG/ posters... let's all have a serious talk.
Curious George honestly doesn't seem like that bad of a guy.
Haven't any of you ever known a habitual liar?
I believe that CG uses /k/ as a way to embrace delusions he has about himself in order to cope with his life.
Think about it:
>posts about how he goes to parties where he drinks and smokes weed
>posts about beating another boy up until the guy cried
>talks about nailing hot girls
He is literally delusional.
Just leave him be.
Agreed, he's just 'that kid' we all knew in high school that tagged along with the group.
>MFW we literally held a Survivor vote at the lunch table and voted his ass off the island.
>MFW he thought we were including gim in some joke and it made him stick around even more
> Incapable of believing what i say is true and think im something called habitual lair and a delusional.
Wew! your life must be utter shit!
Ya a foreign or something?
CG, I wish you could just realize that you don't need to pretend to be Russian, pretend to be a good shooter, pretend to be strong, pretend to longboard, pretend to party, pretend to beat up other males, pretend to be handsome for us to care about you and accept you.
You don't need to pretend with us bro.
We all care about you no matter how you are
Building it, I have the tools through a friend.
Looking to build a
>14.5" arreled flat top upper with pinned and welded compensator (Done at manufacturer, I don't have the tools) and carbine gas system with an A2 FSP
>got my own plan for the lower.
If your version of success is money over happiness and self-gratification, all the power to you anon :^
I'm sure you know how to be waaayyyy more happy than the brother you have that I'm sure is a doctor or engineer, right?
I'm sure your parents are just as proud of you, right?
>brother you have that I'm sure is a doctor or engineer
Oh my sweet child, if you only knew.
Im not pretending any of those things tho.
Out of those i can only prove two things without giving out too much information about me or my friends or peers.
Sorry for you shitty life and mindset. Better luck next time perhaps.
About manlet and girl he's just may may'ing
we all know we all have seen our share of manlet trotting around with their girlfriend and sometimes taller girlfriend.
Ya in luck! You want upper completed not building it yourself from sound of it rite?
The quad rail drop in or ff?
are you lonely, do you need a fiend?
i hate how cameras make shit look a lot further than it really is.
Also about 14.5 pinned to 16" complete upper you would be overpaying for sure. You would save money by buying say blem bcm upper for $80 or $50buck Anderson upper then buy pinned 14.5->16" barrel with fsb then say free float quad rail from Midwest or DD. That should cost around $500 to $600. Bretty sure whats out there would be around $700.
I have a hankering for getting a 14.5" middy barrel pinned...
Stamps are fun, but it is nice to have something to travel with you don't have to file a 5320.20 for.
That's what I was asking about in >>28469170
I think I'm going with this handguard unless someone can convince me otherwise
And this barrel setup
Actually, fuck it.
With the Comp Mod1
That takes care of everything but the BCG and CH. (Gonna get a stolen valor rear sight)
If you want a short as possible title 1 upper then that still means you have a bare 16" or barrel with a pinned muzzle device.
I have no problem with pinned 14.5s
Finally got my 80% SBR lower engraved, I'll be milling this thing out this weekend.
Calico Gat is still pretty catchy.
>Not building an A2E2 clone
>Not rocking that sweet sight rail
>Not being a point-and-shoot pro
Reposting for some decadent answer will this
http://www.shop.masdefense.com/105-9MM-BARRELED-UPPER-MIL-SPEC-BARREL-NUT-109BNBU.htm work with this http://www.jsesurplus.com/a1trianglecarbinehandguard.aspx?
It will be noice. Just make sure you get the right length rail for your gas system.
Call me weird, but if I'm putting a rail on a Delta Ring setup, I thing I personally prefer a quad rail.
just curious, how strong are free float rail systems?
would mounting my sling on the forward most sling point (next to muzzle) cause oscillations that would loosen my rail over time?
or am i just over thinking this shit
Here is what you do.
>Get gas block or front sight tower with gas port
>Get triangular hand guard retainer
>Tap the gas tube hole in the back of the gas block FST and thread a low profile screw into it to check fit
>Use the screw to hold the hand guard retainer to the FST like the gas tube normally would.
>Put an A1 delta ring on your barrel and go nuts
Picture related, but you need a triangular retainer
You'll need to get the barrel cut for the pins that hold the FST on, or use one that goes on with set screws
I like reliability i woukd had replaced upper with A2 too. No elevation drum is unacceptable for me.
Come at me bro!
Im also fan of triangle charging handle.
Its one of those curved twenty rounder.
Is 1x6 worth it over 1x4? 1x6 narrows it down to PA ACSS 1x6 or Vortex Strike Eagle, while 1x4 opens up a lot more, and can be had for cheaper.
Purpose is hunting and 3 gun, yeah I know i'm double dipping but i'm not at an elite level for either so I can afford to take some compromises.
Now I'm not a gun gamer, but I have harvested a few deer in my time. Every 1-4 and 1-6 I've been behind has been lacking at 1x and sacrificed light transmission, reticle usability, or both high magnification.
If you are hunting dawn/dusk I reckon a fixed 4x or 3-9 would serve you better and still be good enough for short range blasting at a local match. Maybe you give up some speed at the range, but you don't sacrifice performance where there is an animal on the pokey end of the stick instead of cardboard.
Wow you own TWO shitty AR's now???
Why do poorfags like him insist on tripfagging to get attention for a shitty AR?
What dumbass buys a .22 AR when you can buy the conversion kit for like $130
I don't understand the point of these handguards.
You're obviously not mounting anything past your FSB so why the extra pointless rails?
And why have something that goes around your FSB rather than just getting a low profile and going with a free float?
People who aren't poor and prefer to have a separate gun so they can shoot both back to back.
Jesus what a poorly mannered faggot!
This guy obviously watch some that Japanese mind cancer cartoons!
You're a dumbass. I wasn't referring to having just one AR that you convert to .22, but rather having 2 or more AR's and the ability to convert anyone of them to .22 for some plinking fun instead of buying meme AR's.
>r U mad BrO
Shut up you cunt. Buy some fucking back up sights and remove your stupid fucking riser and disgusting poorfag optic and put something decent on your AR. Im tired of seeing you tripfag with your shitty guns.
Do you even own anything besides 2 shitty AR-15's? Why would a poorfag want to become a tripfag anyway?
ACTUKALLY its cheaper to buy another dedicated .22lr ar than build another 5.56ar and convert it to .22lr with drop in kit or wiser dedicated .22lr upper for improved accuracy compared to drop in conversion kit.
You took cheaper and stuipd way.
Therefore ya dumb and poorfag!
You're the sperglord who's shilling for le upboats with your dumb fucking trip and shitty AR
I've seen many anons put more work into their AR --AR's that actually have sights, purpose, and functionality, and they arent tripfagging and posting the same goddamn pictures every thread.
Dude, this is their mini ARfcom, think of it like a bunch of furfags making friends on a forun and practically living there because it's where they're popular.
Most of them can't even shoot their pistols at 100+ or use iron sights on their rifle at 300.
>Is 1x6 worth it over 1x4?
Yes, it is.
There's beauty in the nasty, especially hard working parts. Imagine, the bcg being subjugated to the pressure, violent action, metal on metal, and hot gases. Foul carbon spraying everywhere.
Then at home, in a peaceful room and a setting sun with music playing in the background, it gets tenderly wiped down and cleaned. With a little bit soot on the hard to reach corners, building up like wrinkles from age.
And at the end of the session, after a coat of lube to keep it ready for hell again.
What do you guys think about this
Anderson lower and LPK
Anderson upper receiver
Spike or BCM bcg
Raptor charging handle
9" Ballistics Advantage barrel
KAK flash can
Spikes 10''SAR rail
Odin Works adjustable gas block
PA advanced red dot w lower 1/3
Spike folding sights
Magpul MS4 Gen 2 sling
QD end plate
Spikes ladder rail covers
Possible a Geissele SD-C
Now i'm going to have to replace all of my raptors
these ones are new
i think it looks nice and i need it
maybe i will
but you have to pay for it
they're showing them off at shot show, so they probably wont be out for a while
Oh I know that, I just think the industry trend of everyone and their grandmother releasing a new charging handle design is silly.
My Block II is finally together, but man do I fucking hate waffle stocks. I need me a SOPMOD immediately
What should I get if I want to throw together a Vietnam era CAR-15/XM177? I know that Nodak Spud makes some parts, but where could I find stuff like the flash hider and the teardrop forward assist? How much would I be spending if I wanted to throw a rifle like this together?
This place is a great resource, there are people that will do gunsmithing work for you also. All you have to do is lurk
Also, here ya go:
Browse all of the listed sites and you should find everything you need.
Shit, many thanks anon. I appreciate it.
I have a primary arms 1-6x and really like it. Ignore the slight cant. It's been fixed since then.
Do you want people looking at you like pic related?
There are pretty much only trees where I live, but I wouldn't mind getting looks like that.
Is there any realistic reason to not buy one, other than being a colossal faggot if I do?
>80% SBR lower
Hey where's Trump?
Calico has a more expensive lower than you. It doesn't have a rollmark, and it's NFA!
Looks like you're the poorfag now
I am going to freefloat, yes.
I do prefer midlength from shooting friends' ARs.
Right now I'm just trying to find advice on what twist-rate/type of barrel I should get. From what I can tell 1/8 seems to be the most versatile, but 1/7 is the most common, next to 1/9.
Are there any downsides to 1/8? I'm not gonna be shooting anything lighter than 55gr but may shooting heavier grains at some point.
Are there any disadvantages to SS barrel compared to a traditional one?
From what I can tell the only disadvantage of stainless is the looks.
Some people say that chrome lined is more durable but It's negligible, the military is putting more stainless barrels in service too so there's that.
Should be slightly more accurate as well.
If you are gonna ride her hard I would get chrome lined, but for regular shooting the stainless will serve quite well on paper.
Also the pic related graph is a good baseline.
That's just my opinion though man. Go with your gut.
Is the LE6920 the best bang for your buck(no pun intended) AR you can get these days?
>Buying a muzzle device that doesn't have rails
It's 2016 people.
Not particularly. You can get similar quality for less.
Just don't botch it! I hate seeing this shit...
I got my LE6920 for about $850 but you could build a PSA rifle for less and still have a good AR.
Dwell in ARG and do research on your own.
Decide what you want the rifle to do as well and build it accordingly. You can build it to for a wide variety of roles, but if you have something specific in mind build it for that.
Best AR for the price? I'm looking to get one...
Looking for something to take the the range but having a rifle on hand in case shit goes down is a bonus, so reliability is pretty important.
I'm thinking maybe a 14 inch barrel. I don't really have a preference over the handguard type
Not them but this was posted in another thread, I was thinking about buying some of this stuff
>Get lower 1/3 cowittness mount
If you want to spend less look at psa. As long as it's psa and not ptac it will be fine.
That upper is out of stock. I'm not a fan of the jcomp or fixed front sights but that's just me if you like it get them
For less than $450, you're really pushing the envelope. You're looking at something like a blemished PTAC from PSA, which will function, but it won't be great quality. Personally, $450-550 is the bare minimum for reasonable AR, sights, and a magazine.
Figure out what you want first, then hit up PAlmetto state armory and prowl for deals. Find a basic completed upper, completed lower, BCG and CH, and then whatever sights you like.
Not how a Trust works (yet)
I buy 80%'s purely for the aesthetics and no other reason
You do realize you need to get it engraved for it to be an SBR? Kinda ruins the sleek look, doesnt it?
>Not how a Trust works (yet)
Sure, too bad that the waitlists are shooting up and more than likely if you don't file within the next 30 days, yours wont clear within the 180 day cut off.
>interior magwell engraving
>implying my Form wasn't approved in November
My job requires a security clearance and periodic investigations, the government already knows my business.
I don't really give a shit.
Are you the "rollmarks are for niggers" guy? Did you ever get an upper?