Archived threads in /diy/ - Do It yourself - 98. page

>>1199462
Bump

>>1199462
you need a video acquisition card fast enough, which for sure doesn't come with an usb interface so you can't.
But maybe, if you can settle with lower resolutions you may be lucky with one with usb3.

File: rawrrr2.jpg (94KB, 655x805px) Image search: [Google]

94KB, 655x805px

>>1199462

You cant do it with out taking apart your laptop screen and using a lcd controller for it, easiest solution is to get a usb capture device / tv tuner. You can get them on ebay cheap.

Yep cool story. So my mother passed and I've got her family firepocker (don't ask me why it's a thing, mums side of the family is weird and Scottish) anyways it's well over a hundred years old. The shaft is just a thick metal wire, and it doesn't have a handle. What's the best way to make and attach a handle for it?

Your pic is not a DC motor, or not at the voltages you describe.

Post a pic of your boat or some reasonable idea of what you mean by high HP and we can help you.

>>1198499
Pic is what came up when I googled "electric motor on google".

Boats at my university on the other side of the us from me so i can't really post a picture.

It's about 200 Pounds without anyone on. Were going to use two 24V Lead gel Car batteries in series (I can find the brand if needed) or make a new system with two 36V batteries if we can find a motor for it. Were currently using the rechargeable battery the motor came with.

By high horsepower I mean from 5-10 HP

>>1198495
I would like to start off by saying, I am NOT shilling this website, I do not work for them, or get paid to sponsor them.

that being said, the fucking thing should be in the sticky, I seriously could not find a website any cheaper then this.

http://www.surpluscenter.com/Electric-Motors/

I needed to replace my tablesaw motor, and for the asking prices on ebay/craigslist for USED motors were the EXACT price for a NEW motor from surplus center.. so its pretty fucking good. my little hidden gem.

a good motor for even something weighing 700lbs total.

http://www.surpluscenter.com/Electric-Motors/3-Phase-Motors/3-Phase-Motors-Base-Mount/?page_no=1&fq=ATR_Motors_HP:7\-1/2

the only downside of the website for me, is they charge for shipping and hell it ain't cheap, expect 35-50 dollars in shipping on your total budget. and of course I think they only sell inside the USA.

Look into AC instead of DC, better on-demand torque and more effective as boat motors.

File: IMG_2955.jpg (84KB, 450x450px) Image search: [Google]

84KB, 450x450px

>Ruining nice garlic bread in the name of vanity

>>1198173
Pic not related?

>>1198178
yes sadly

I'd say buy a few different types of spray cans and try them out. I think some sort of a stencil and spray painting over it is the easiest method.

I don't know how much the stiffness affects anything as, to my understanding, patches are relatively small and tend to be on flatter surfaces. If stiffness is an issue, you could try dyes or bleaches on denim. I think any substance that would get absorbed by the fabric would work but the end result would be less detailed.

>>1198051

If you're looking for it to last, heat treated acrylic is the way to go. Go the extra step and buy Fray Check to go over it once you've heat treated. If you only hand wash it'll last damn near forever.

>>1198051

dont, if you're going to look fucking retarded. unless you're 15, in which case you're cringe.

either way, stop being a degenerate and dress properly

File: IMG_20170622_231241.jpg (1MB, 2560x1920px) Image search: [Google]

1MB, 2560x1920px

Just bumpin with more images

File: IMG_20170622_231456.jpg (2MB, 2560x1920px) Image search: [Google]

2MB, 2560x1920px

Here are the boxes

>>1197818
1. Find a tube tester or build a bunch of test circuits. You can also use a multimeter to check against shorts or burned filaments.
2. The same way you find out what some random IC and its pins do: read the datasheet.
3. You could insert them in your ass.

cat litter or sawdust, scrub hard

Finish with a harsh as fuck solvent like chlorinated brake cleaner

>Put sawdust on it
>Wait 3 days
>Remove sawdust and then water last the fuck out of the concrete
>Pout bleach over the area
>Waterblast the fuck out of it again
>Sandpaper (by hand) the remaining spots
DONT DO IT AGAIN!!

>>1196907

I already soaked the oil up. Should I still use cat litter in that case? And should I sweep up all cat litter before hitting it with a strong solvent?

I swear english is my first language.

So while sanding down the desk, I've uncovered marks where the sun and the desk do not meet. Remnants of what the previous owner has used this before.

Like his monitor stand.

>>1196405
It looks like particle board with some paper veneer. I've gotten better desks off the free section of CL and you paid money for that? And now you are going to waste more money painting it? Why? The paint is just going to wear off in a few months anyway.

File: file.png (387KB, 1254x742px) Image search: [Google]

387KB, 1254x742px

example

If they are professional and not the common nignog - they are prepared for things like this.

Hijack and boom - EMP to block the Signal.

>>1196194
Niggers are not that smart where I live.

They just want to use your car in other armed robberies then either half hardheartedly strip it with the tools they stole from family dollar or set it on fire behind an abandon building

Move somewhere with no neighbors, or kill your neighbor.

>>1196034
Theres this thing called a rake...

>>1196038
First off, I don't feel like asking three (3) neighbors for full access to their yard twice a year.
Secondly, the space between the wire fence and the hedge is too narrow.

IGNORE THIS THREAD.
I thought I was on /o/.

>>1200161
>>1200162
You can't tell me what to do.

>>1200162
bump

Measure ID, OD and width then contact a bearing supplier online with the pic, part number and the above dimensional info.

They have phone numbers and email addresses for a reason. Don't be afraid to contact vendors. Bearings are cheap so I suggest buying spares AFTER you ensure a particular bearing does the job.

literally just googled the fucking SN and found 1000 results. can you be this stupid?

>>1200017
Do this.

A lot of bearing suppliers just work on these measurements on their websites.

Draw cat whiskers

Summer's here

>>1199935
>Anonymous mask
no

File: GummyVABlocks1.jpg (300KB, 1000x750px) Image search: [Google]

300KB, 1000x750px

OP here, shameless self bump/question

Is anyone familiar with NSW forestry laws? I'd like to go burl harvesting but I'm not so sure if it's legal to cut down trees in state forest- especially those with burls considering different rules apply for those in the U.S. Do I need a permit? Or is my only choice dumping 1.5million into a property with private land?

What is that stuff?
Some dramatic grain showing there.
Is the dark stuff spalting?

>>1200129
yep! spalted wood is characterised by decaying wood/infected wood from stress on the tree.

>>1199802
> it's another "have junk, wat do" thread.

We have no idea what your hobbies are. We have no idea what your skillset is. We have no idea what would be useful to you. How the fuck are we supposed to know?

Grab what you can, let it sit in your garage for 10 years, then throw it out. Whatever.

>>1199802
what's so special about it if you're not going to get the engine/hydraulic pumps/motors/cylinders?

i guess switches (that you could get anywhere)
lights? (that you could get anywhere)
it probably doesn't need 'circuits'

Scrap everything above the turntable and build a tank like those kids that bought a tracked CAT machine for $500 at auction and built a scale Tiger I on it for paintball.